Urban agriculture is a current topic and this study examines the possibility of cultivating on balconies in the city. The study was performed at Uppsala University and examines, from a structural engineering perspective, how different existing balcony/terrace structures are affected by cultivation. A cultivation balcony defined in the study as a balcony/terrace which is specifically designed for cultivation. Three units of study have been selected according to this criterion. Four factors were examined, these were loads, Moisture/water, economy and cultivation.

This examination work on studies and research in articles is mostly from other countries. The purpose of the examination work have been to find out if there are any means you can work with to find out when its time to start irrigation, how they works and if they are credible. In Sweden there is not many means for decide when it?s time to irrigate and how much water you should appear. Swedish farmers think they have so much experience that they don?t need techniques like this.

Title: Kvarteret Tvättstugan, an apartment building with massive wood construction. A thesis about acoustic and fire requirements and a comparison of energy and Moisture aspects. Earlier restrictions in the Swedish legislation have resulted that only a small percentage of the apartment buildings that have been built are designed with a massive wood construction. It has been allowed to build unrestricted with wood since 1994 as long as the function of requirements are fulfilled. This change in the rules together with the great environmental benefits of wood has led to that more companies choose to build apartment buildings with wood. One of these companies is Folkhem Production AB.

Aeroseum is an aviation museum located in an old military underground hangar. The ventilation system in the hangar is designed for the military purpose of the hangar. This design includes a solution with air flowing through the space between the construction of the hangar and the rock surface. The solution is intended to avoid a buildup of inflammable gases. This design leads too high humidity levels in the hangar.

This paper aims to, through a literature review, examine how to best design and adapt calf huts to meet the calf's physiological requirements and reduce the infection pressure for enteric and respiratory diseases. It illuminates how the calf relates to different temperatures and climate, which temperature control mechanisms it uses and its ability to perform these regulations, as well as providing a summary of the past decades´ research on the calf huts housing system. These two theory chapters, along with a concluding discussion, provide a better understanding of how to, especially in temperate climates, design the most suitable calf hut, which cater to the calf's both thermal comfort and physical health. The literature suggests that the calf's own temperature control works well to counteract the temperature outside the desired range, and that one of the most important factors rather is ventilation of a calf hut, which reduces Moisture and pathogens. The conclusion of this paper is mainly that there is not an obvious way to place and construct a calf hutch and that most design principles contribute to both positive and negative effects simultaneously.

There is a need for productivities data and data for different types of machines for comminution of logging residues. The lack of data and studies on GROT comminution makes it difficult to evaluate different chains for handling of residue fuels and make system analyses.Four types of machines with three different working principles were compared at six studies during winter conditions. Three to eleven trials during 9.5 to 30.7 minutes were made on each machine. Samples from the produced material at each study were sieved to determine the size distribution of the comminuted material. Samples were also taken from the studies for determination of Moisture content.

Fuel pellets are a refined bio fuel mostly consisting of residues from sawmills and wood industry. At Rindi Västerdala AB's combined bio energy plant in Vansbro fuel pellets are produced, while the waste heat from the process is used for district heating. The pellets are produced from sawdust, wood shavings and dry wood chips that is dried, milled and pressed into small cylindrical rods. The advantage of refining the wood material in this manner is that the energy value is greater per unit volume and unit weight, thereby the cost of transportation per energy unit is reduced. Also, less storage space is needed.Pellet manufacturing is a complex process since many parameters affects the final results.

The production of oilseed rape is an important issue in Sweden and those who never have grown oilseed rape (OSR) are now willing to try. It is always a risk to grow oilseed rape, specially winter OSR, because of outwintering. This risk increases as you go north and therefore establishment and autumn growth is very important. These are some of the reasons that I have chosen to write about the establishment of winter oilseed rape in Middle Sweden. There are many factors that influence the outcome of the establishment, e. g.

The aim of this bachelor thesis has been to investigate some of the materials present in and onprinted papers which might be suitable for analysis. A brief history of paper making and somepigments were studied after which the theory of some of the available methods for technicalanalysis were summarized. Two works of art on paper were chosen for a closer examination,both are woodblock prints but of different composition and origin. The investigation wasmade to exemplify some of the common techniques applied on works of art. There were twoaims in these examinations.

Aeroseum is an aviation museum located in an old military underground hangar. The ventilation system in the hangar is designed for the military purpose of the hangar. This design includes a solution with air flowing through the space between the construction of the hangar and the rock surface. The solution is intended to avoid a buildup of inflammable gases. This design leads too high humidity levels in the hangar.

I dagsläget finns en stor mängd byggnader i Sverige där fasaden består av puts direkt anliggande mot antingen lättbetong eller tegel. Dessa fasader kan skapa problem för brukaren p.g.a. fukttransport via putsen direkt in i konstruktionen. Problemen som kan uppstå som följd av dessa konstruktioner är inte bara estetiska utan kan även påverka inomhusmiljön. Syftet med detta arbete var att undersöka om det gick att med ny teknik visa de resultat som framkommit från erfarenheter från praktiskt arbete samt undersöka hur en renovering påverkar de fasader som består av puts direkt mot lättbetong eller tegel.

Tile covered bathrooms require a wellexecuted waterproofing in order toprotect the underlying construction fromMoisture. Länsforsakringar Uppsala paysannually out millions in insurance fordamages related to poor waterproofedbathrooms. In recent years, SP (SwedishNational Testing and Research Institute)investigated and researchedwaterproofing products, resulting ingreater shortcomings of product defectsthan expected.This report raises the problemsconcerning waterproofing and discusseswhy they occur. By studying productinstructions and insurance cases anddamage reports provided byLänsforsakringar, the most commonproblems concerning bathroomwaterproofing where concluded. Animportant part of the report was tofind out the actual cause to whywaterproofing damages occur.The results of the survey indicate thata common cause of water damage usuallyis related to poor productinstallations.

Många byggnader är idag fuktskadade. Fuktskador uppstår på så väl nya som gamla byggnader. Idag provtrycker man hus för att få ett värde på dess täthet, men många hus som klarar täthetskraven drabbas ändå av fuktskador. Detta beror på att otätheterna är lokala på en eller flera delar av klimatskalet bortsett från otätheter vid anslutningar.  En studie har gjorts på två väggtyper; en standardvägg och en passivhusvägg.

In January 2005 large forest areas in south Sweden were severely damaged by storm. This final thesis describes the work with creating an ecological and landscape-adapted regeneration plan for a severely storm damaged property in Kronobergs region in south Sweden. This regeneration plan, in difference to more regular plans, are focusing more on the owner?s use and goal?s for the property and seeing the property from a more comprehensive view in the regeneration process. Beside production and environmental values the plan also take in consideration other values as aesthetic, culture history, landscape picture and recreation values.

The purpose of this study has been to make an inventory of combustible waste in the region around Norrköping and to investigate the composition of domestic waste, industrial waste and two different types of sludge. The work was performed at the request of Norrköping Miljö & Energi, due to the planning of an incineration plant. The inventory of the waste was performed through inspection of environmental impact reports, from waste disposal plants in a number of local government areas in the region. The quantities were also compared to another inventory, carried out in a different way. The characterisation of the wastes was compared to the fuel specification determined by Norrköping Miljö & Energi.