Tile covered bathrooms require a wellexecuted waterproofing in order toprotect the underlying construction fromMoisture. Länsforsakringar Uppsala paysannually out millions in insurance fordamages related to poor waterproofedbathrooms. In recent years, SP (SwedishNational Testing and Research Institute)investigated and researchedwaterproofing products, resulting ingreater shortcomings of product defectsthan expected.This report raises the problemsconcerning waterproofing and discusseswhy they occur. By studying productinstructions and insurance cases anddamage reports provided byLänsforsakringar, the most commonproblems concerning bathroomwaterproofing where concluded. Animportant part of the report was tofind out the actual cause to whywaterproofing damages occur.The results of the survey indicate thata common cause of water damage usuallyis related to poor productinstallations.

Climate change is a global and slow process that affects humans all over the world. Climate adaption within agriculture is important to reduce the risks that agricultures are exposed to because of climate change.  Through climate adaption you can improve the positive effects and take advantage of them optimally. How the climate change affects agricultures varies depending on regions and societies. The purposes of the study are to examine how different actors experience the impacts of climate change on the agriculture in Värmland.

Sow shoulder lesions are a common form of decubital ulcers in sows. The wounds are often bilateral and affect both loose housed and restrained sows. In most cases shoulder lesions develop after farrowing and heal after weaning. Sows that once have had decubital ulcera are however more proned to develop new wounds after the next farrowing. The problem is multifactorial and a number of risk factors have been described, including body condition, body size, parity, time spent lying down, flooring, Moisture, breed, body temperature and some herd factors. The aim of this study was to investigate whether the height of the tuber spina scapulae is a risk factor for the development of decubital ulcers.

Serpula lacrymans infestation has become an increasingly common problem, and is usually perceived as a tip of an iceberg.During the 21st century there has been a perceived increase of damage caused by serpula lacrymans, at AB Mats Fransson Saneringstjänst ? Anticimex in the county of Kronoberg. A similar increase has also been noted by employees at the offices in Kalmar, Karlstad, Piteå, Stockholm, Malmö, Söderhamn, Halmstad and Visby.The methods used to collect data for the project has been interviews with a number, for the project, relevant key persons, such as analysis engineers at Trygghansa and Anticimex, as well as personnel at the botanical institution at Gothenburg University and the Botaniska Analysgruppen in Gothenburg, further statistics from SMHI and analyses of reported instances of infestations have been used.The majority of the people interviewed believe that the increase is caused by renovations of old houses, higher precipitation during the summer months, as well as a moister climate and warmer winters. The latter can also be gleaned from statistics from SMHI concerning temperature, precipitation, and relative humidity.Analysed damage reports show that the most common cause for the infestation is ground Moisture, even when combined wooden materials.Older houses that where built around 1900 are the ones most frequently infested with serpula lacrymans. The part of the building most frequently infested is the foundation, where cellars and suspended foundation are the most common types to be infested.

Fuktskador på uteluftsventilerade vindar är ett ökat problem, i det mer miljömedvetna Sverige. Genom tjockare vindsbjälklagsisolering minskar både energiförlusten genom bjälklaget och uppvärmningsbehovet i huset, men hur många funderar på vad som händer med det förändrade klimatet på vinden och hur det kan påverka fuktförhållandena i utsatta delar av konstruktionen.Studier från Chalmers Tekniska Högskola har framställt ett fuktberäkningsprogram för uteluftsventilerade vindar vid namn Simple Cold Attic Model. Programmets funktion och potential har prövats i denna rapport genom en beräkningsanalys av en uteluftsventilerad vindskonstruktion. Försök till att förbättra fuktsäkerheten i konstruktionen har utförts och redovisas i rapporten. Studien har påvisat att den studerade konstruktionen inte är fuktsäker om den uppförs i Stockholmsområdet. Det visades även att aktiva val i konstruktionen kan förebygga fuktskador. Studien har påvisat vikten av inte beräkna med medelår för klimat och hur det påverkar beräkningsresultatet av mögeltillväxt.

The aim of this work was to study if the edge of the forest is more resistant to heavy winds than the trees located further in from the edge, and how this edge effect changes between different types of tree species and site types. The data was collected from an electric power line going from the north to the south of Sweden. The mean value of the clearcutted area around the power line was 120 meters. The main direction of the storm in January 2005 was west-southwest and thus the power line was a perfect place for gathering a large data set. The main parameter studied was the damage frequency at the edge of the forest compared to the trees located further in from the edge (up to 100 m from the power line). Tree species mixture, soil Moisture class, soil type, topography, stand height, stand height of the stand on the other side of the power line and wind exposition was estimated. The results showed a distinct edge effect. The edge of the forest had clearly lower damage frequency for all tree species. A marked difference was observed between tree species and damage frequency.

A common problem in forestry is plant death caused by frost. The risk of frost is highest on wind protected, flat or low-lying areas in the terrain. Here you often have regeneration problems with Norwegian spruce which is especially sensitive to spring frost. Swedish tree experiments have shown that the black spruce can be a suitable alternative on these areas, for example on Moisture frost prone areas. The species originates from North America and its pioneer tree characteristics make it more frost hardy than Norwegian spruce.

In Sweden, the demand for bio energy has increased in recent years due to the current energy and climate debate. In 2008, the energy supply of Sweden was 612 TWh, biofuels accounted for 123 TWh of these. Stumps have been highlighted as a potential fuel in recent years and the Swedish Forest Agency expects a technically and biologically feasible potential of 20.7 TWh annually between 2010 and 2019. The idea of utilize stumps is not new. During the 19th century stumps were used for tar production and during the 70?s and 80?s attempts were made to use stumps in the pulp industry.

Calcareous fens constitute a specific habitat which is uncommon in Europe and protected by the EU habitat directive due to its importance to several threatened species. Hagebyhöga in Östergötland is a calcareous fen habitat included in the Natura 2000 Networking Programme. Adjacent to the existing fen, a degraded fen area is situated. The area has been used for agriculture for several years but is now going to be restored to its former state by the county administrative board of Östergötland.When working with restoration of degraded fen areas it is important to aquire knowledge about the chemical soil conditions. Plant growth limited by phosphorus and low fertility are characteristic conditions for calcareous fens, whilst arable land usually is highly fertile and limited by nitrogen.The purpose of this study is to bring forth useful knowledge for restoring the degraded calcareous fen of Hagebyhöga.

Högbytorp is Ragn-Sells? largest waste facility and it is located north of Stockholm. There is an old landfill still in use, but at the end of this year it will be closed. The waste deposited on the landfill can, through decomposition, give rise to a large amount of methane gas, which is an energy rich gas that can be used for heat and electricity production. To receive a relatively large amount of gas, the decomposition requires a high Moisture content in the waste.

Fuel pellets are in Sweden mainly produced from sawdust and cutter shavings. Before the pelletising process the raw material is dried to attain consistent Moisture content and ground up in a hammer mill. In the densification process (pelletising) the ground material is forced through holes in a rotating die. This heats up the wood particles which cause them to soften and self bond. After the process the pellets are cooled, sieved and bagged. The milling process creates a wide range of particle sizes.

This thesis is a study of humidity at Knauf Danogips external plasterboard. The study is performed at the building project Kv. Maskinen in Jönköping in cooperation with NCC Construction AB and Knauf Danogips. The measuring was performed during five winter/spring months to see how the weather influenced the plasterboard.The measuring was performed at a small two-storied building and a larger fourstoried building. From the buildings` placement were a couple of measuring dots selected and to get a good result was the dots located in the four cardinal points.

Rapporten ingår i ett FoU- projekt för Högskolan Dalarna, där målet är att ta fram en konstruktion utan ångspärr som ska klara dagens mått på lufttäthet och fuktkrav.Syftet med denna rapport är att utreda hur fukt påverkar en byggnad medmassivträstomme och olika isoleringsmaterial utan ångspärr. Mineralull och träfiberisolering jämförs mot varandra för att se hur dessa påverkarfuktbelastningen i en väggkonstruktion. Testobjektet är lokaliserat i Dalarna, inget fukttillskott har funnits inomhus i byggnaden.För att genomföra detta arbete har tre stycken olika metoder används. Ensimulering, verkliga uppmätta värden och en provtagning. Fuktsimuleringen genomfördes med hjälp av programmet WUFI, uppmätta värden i form av relativ fuktighet och temperatur har samlats in kontinuerligt under två års tid från väggkonstruktionen via mätsensorer.

The concentration and storage of organic chlorine and chloride were determined in soil, to a depth of 40 cm, in a coniferous forest in the Stubbetorp catchment area in south-east Sweden. Also, the spatial distribution of the two forms of chlorine was determined. Soil samples were collected at 49 of the nodes in a grid with approximately 105 m between the nodes. The analysis of spatial variability suggested that no spatial autocorrelation was present either within the variable organic chlorine or chloride. This means that no sample was more influenced by another nearby sample, as compared to other samples further away.

Lining techniques such as nap bonding and mist lining were developed in the late 20th century and have gained popularity alongside with the increased use of acrylic emulsions as adhesives. The ability of the adhesive to create a nap bond to the canvases without penetrating the fibers has shown advantages regarding reversibility. In addition, the use of Moisture, heat and pressure is reduced, which can be advantageous for more sensitive paintings. These lining techniques have been included in several studies where reversibility, minimal intervention and respect for the individual requirements and problems of each object have been the focus. The adaptability of the methods has been confirmed and to further explore the adaptability, this study consists of three simpler application techniques with the adhesive Lascaux 303 HV on mockups.