The aim of the study was to investigate if methane emission in a constructed wetland changed in a diurnal pattern correlating to temperature, humidity or light conditions. The gas measurements were carried out with a static chamber technique. The wetland (in Nykvarn outside of Linköping, Sweden) takes care of wastewater to reduce the nitrogen loads. Measurements were carried out at three different occasions in the summer of 1998 on two sites in the wetland. One site was close to the inflow, inhabited by Lemnaceae, and another site was located further downstream inhabited by the emergent macrophyte Typha latifolia.

Background: In small animal healthcare fluid therapy is an important area. To get an adequate treatment there are several factors that may play important roles in this matter. One of these factors is the correct use of the administration technique. Aim: The aim was to investigate how correct the amount of prescribed fluid was given when different people set up a fluid administration set. Method: An experimental study was performed to compare two different infusion techniques.

Radio frequency identification (RFID) is a versatile wireless technology usedworldwide. The fields of applications are many and its popularity constantlygrows due to smaller in size, better and less expensive components. RFID isused to identify, track or share information about an object using radio waves.This master thesis describes the process of designing and implementing ahandheld UHF RFID reader. The goal was to, based on a UHF RFID-chipdesign a fully functional, small in size and power efficient device. Amicrocontroller provides the user interface and is also used to control theRFID-chip and a Bluetooth device.

Background: Corporate Social Responsibility (CSR) is a term that has become increasingly prominent in the corporate world. As the awareness of responsibly produced products is growing among both companies and consumers, it has become increasingly important for companies to get involved in sustainability issues. There may be several reasons why companies choose to integrate CSR in their business, where one reason may be related to company size. In the business category of micro, there is currently no widespread research, which makes this company size interesting to study. The choice of industry was made because coffee is one of the world's most important merchandise, and the coffee industry has come a long way with integrating CSR in comparision to many other industries.Purpose and research question: The purpose of this study is to create a deeper understanding of why coffee roasters in the business category of micro enterprises choose to incorporate CSR in their businesses.

The purpose of this thesis was to highlight how different aspects of market communication are used when micro companies choose to use both Internet and store selling activities towards the consumer market. The thesis dealt with off-line and on-line communication considerations with focus on advertising, interactions, and relations. In order to achieve this purpose a case study was conducted, that revealed that the companies acted according to theories. The conclusions drawn from the thesis were that companies tended to rely on traditional ways of dealing with advertising and interaction. We could also see that relations were created as a result of unconscious behavior and that the Internet activities still were on a basic level..

This paper intends to show how micro- and small businesses in the tourism and experience industry makes use of social media as a marketing tool. The study also shows the possibilities for businesses to market themselves to customers through social media. Small businesses usually don?t have the same conditions or the same marketing resources that larger companies have. For small businesses that lack marketing resources, social media is a great addition to marketing since the technology around social media is relatively simple.

Advertisers of today are facing a great challenge in a landscape where it becomes even more difficult to break through the clutter and convince consumers to buy their products. In order to succeed, they need to come up with new ways of communicating with their customers. The purpose of this paper is to investigate if micro-blogging could be considered an effective media choice in order to enhance the perception of brand associations and traditional communication effects. The subject is of interest as brands are putting increasingly more resources into this communication channel. However, at the current date the marketing effects of micro-blogging is unexplored in academic research.

The aim of our study is to explore the empowerment process among micro-business owners in Kayamandi, a black township of Stellenbosch in South Africa. What are the positive and negative implications for the empowerment process? Another aim is to find out the role of local and international support in this process. The theoretical framework of this study revolves around the concepts of gender, power and empowerment. Our methods are qualitative interviews and observations.

ABB I-R Waterjet Systems combines the robotics and motion expertise of ABB Flexible Automation with high-pressure intensifier/pumping technology from Ingersoll-Rand to provide and continue to develop innovative waterjet cutting systems for global markets. The purpose of this assignment is to develop a process water purifier. The purifier should be applicable as an option to ABB I-R?s production cell Cutting-Box. At first hand the process water should be purified well enough to let out in the municipal sewage system, but the ultimate solution is purifying the process water to the range that recycling is possible.

A wastewater treatment plant has the task to refine the wastewater from substances that should not be released into the environment. The decomposition process can, in a simple way, be described as follows: micro-organisms breathe oxygen and eat unwanted substances. The environment in which the micro-organism lives is known as sludge and the correct amount of oxygen available in the sludge is important for the decomposition to be effective. The oxygenation of the sludge alone stands for about 30% of the plant?s energy consumption.

ABB I-R Waterjet Systems combines the robotics and motion expertise of ABB Flexible Automation with high-pressure intensifier/pumping technology from Ingersoll-Rand to provide and continue to develop innovative waterjet cutting systems for global markets. The purpose of this assignment is to develop a process water purifier. The purifier should be applicable as an option to ABB I-R?s production cell Cutting-Box. At first hand the process water should be purified well enough to let out in the municipal sewage system, but the ultimate solution is purifying the process water to the range that recycling is possible. When investigating the different principle of purifying water, a research of different products and their manufactories was done. These different products were compared and the principle of filtration was the most applicable, as most of the products were designed for far larger applications. As the process water contains quite large amount of particles, it is necessary to perform the filtration in different steps. The process water purifier is therefore composed of a module of coarse filtration and one of micro filtration. In the module of coarse filtration the mainly amount of fibres and particles are eliminated. They are kept back in the container unit with the larger fragments and dumped with these when the container is emptied. In the module of micro filtration the filtration is performed in two steps. In the first step particles larger than 50?m are eliminated, in the second step the micro filter is setting the range of purifying, in this case 10?m.

This bachelor thesis is about an ultrasonic sensor, implemented in a bubble chamber in Artis. The sensor consists of the piezoelectric sensor and an electronic control circuit. The control circuit consists of a programmable microprocessor, PIC18F2420 and a circuit, which sends the excitation signal to the piezoelectric sensor, and later receives the echo. This bachelor thesis consists also of a theoretical study, which examines different techniques of liquid level sensing in a chamber. The study discusses which factors are important in liquid level sensing and examine accepted methods.

The present study investigated free narratives in 72 children between 3;11 and 9;0 years. Participants were recruited from a multilingual environment in eastern Gothenburg. The children were instructed to make up their own stories after being provided with openings, ?Story stems?. The stories were then transcribed and analyzed on micro- and macro level and narrative evaluation.

In order to facilitate testing of anesthesia machines a patient simulator has been required by Maquet Critical Care AB. A patient simulator has been developed to reduce expensive and time consuming animal experiments and temporary lab arrangements. The patient simulator has been developed and designed to simulate human lungs with regards to anesthetic uptake, production of carbon dioxide and heating and moisturizing exhaled air.The system comprises a container and a test lung to simulate the volume and the dynamic of the human lung. The simulation of uptake of anesthetics has been implemented by pumping a fraction of the gas from the container through a bypass circuit with an active charcoal filter that adsorbs volatile anesthetics. The flow through the bypass circuit is generated by a pump and is controlled by a linear valve.The resulting performance of the patient simulator has fulfilled the requirements.

Uppsala University is involved in a large international collaborationto build the Laser heater system for the European Xray Free-electronlaser in Hamburg, Germany. In this thesis I describe a laser incouplingdevice into the vacuum chamber of this laser heater all the way fromthe specifications to a completed design.The laser heater is a very important part of the XFEL and thepart described here is a part of the vacuum system needed to couplean external laser into the electron vacuum system and align it withthe electron bunches in order to heat them. The task was started by studying the literature about the basic theory andthe design of vacuum systems. After this study and collection of ideaswith colleagues I started to prepare different concepts to solve thetask. The ideas can be put into two categories, in one case the couplingmirror is located inside the vacuum chamber and in the second caseoutside.