Our employer Camatec Industriteknik AB gave us the assignments to increase theirs range of versions on Camcoil that is their own patent product. Camcoil is a capstan system that is used when steel band fabricated. Exist for example in production lines their steel band should be annealed. Our goal with this work is to come up with a completed production basis on a Camcoil for heavy industry. The basis should contain calculations, 3D-constructions, drawings and cost proposal on manufacturing and detail purchase.Demands on this project:1.

AbstractSurface-water includes different kinds of pollutants from traffic and roads. To prevent these pollutants to reach nearby lakes one can construct surface-water ponds on locations with heavy traffic. At Bergviks shopping centre in Karlstad, two ponds, one smaller and one bigger has been constructed in order to decrease the pollutant pressure from the receiving waters of Kattfjorden. Several heavy metals are essential for plants and animals in low concentration but when they occur in higher concentrations, they become toxic to the organism. The larger pond at Bergviks shopping centre has a sedimentation function so the heavy metals sink to the bottom thereby not releasing directly in to Kattfjorden.

X-ray fluorescence (XRF) detection of heavy metals is a cost- and time-effective method for investigation of polluted areas. Compared to laboratory analysis, XRF analysis is limited by high detection limits and uncertainties in some situations. Preparation of samples is known to affect the results of measurements.The purpose of this thesis is to bring a deeper understanding of how different factors affect the results of XRF-analysis. A large number of measurements have been made with the instruments Niton XLt 700 and Niton Xli 700. Results from measurements of lead, zinc and copper have been analysed.This study has shown that a greater moisture content will give a lower measured concentration for the same sample.

This master thesis covers the design of a special garden room, The Hardscape Room, in The Rehabilitation Gardens at Alnarp, in southern Sweden, as well as describes the design process. The Rehabilitation Gardens are intended to serve several purposes. It will offer horticultural therapeutic treatment programs for people diagnosed as having had burnout disease for an extended period. Research is also aimed at studying the possible impact of different garden design hypotheses as well as different forms of horticultural therapy. In The Rehabilitation Gardens at Alnarp the most extreme and demanding garden room focused on cultivation and horticultural therapy is The Hardscape Room.

Syftet med denna studie är att i sex amerikanska filmer som tar upp kriget i Vietnam undersöka hur den västerländska och den orientaliska kulturen skildras i relation till varandra utifrån ett postkolonialt perspektiv. Både framställningen av såväl amerikanerna, fienden och sydvietnameserna har studerats ur detta perspektiv. Detta undersöks genom att koppla till teorier och begrepp såsom semiotik och ideologi och metoder såsom diskurs och diskursanalys, mise-en-scéne och filmanalys. Studien undersöker om det skett någon förändring av det postkoloniala perspektivet i filmernas framställning. Undersökningen inkluderar: Gröna Baskrarna, The Deer Hunter, Apocalypse Now Redux, Plutonen, Full Metal Jacket och We Were Soldiers.

?Halmstads Fastighets AB? is a local real estate company investing in sustainable development. One problem though is that the domestic waste, particularly the source separation, at the three resident blocks for students? isn´t working very well. This creates inconveniences for people and environment as well as decreasing the impression on the estates.This project has had the ambition to improve the domestic waste and increase the amount of source separation at HFAB´s student hostels.

Under början av 1990-talet inledde Volvo Personvagnar i Olofström en process där övervakning av robotiserad MIG/MAG-svetsning var i fokus. Det ledde fram till ett forskningsprojekt som resulterade i att Stefan Adolfsson, Lunds tekniska högskola/Blekinge tekniska högskola, 1998 presenterade avhandlingen Automatic Quality Monitoring in GMA Welding using Signal Processing Methods [5]. I den presenterades ett SPRT-baserat övervakningskoncept för övervakning av MIG/MAG-svetsning med kort- och spraybåge. För att få fram ett kostnadseffektivt övervakningssystem uppkom tanken att använda vanliga PC-datorer som plattform. De erbjuder hög beräkningskapacitet till förhållandevis låg kostnad.

The purpose of this work was to provide a better understanding of urea?s decomposition and byproduct formation in an SCR system on heavy trucks. In my experimental setup with TGA-DSC-FTIR (a combination of two thermal analysis methods and a method for gas phase detection), an FTIR method for urea in the gas phase was developed for the qualitative and quantitative determination of urea and its decomposition products. Chemicals such as urea, biuret, cyanuric acid and melamine of p.a. quality were used in this method development. Beforehand, there was no FTIR method available to detect these substances; hence, the aim of this work was to develop an FTIR method to understand the degradation chain of urea. The combination of TGA and DSC was used for analysis of different samples, where urea, biuret, cyanuric acid and melamine in varying amounts have been weighted in for various experiments in order to study the temperature at which a phase transition or reaction occurs, i.e.

Many companies have historically forced their interests through without any thoughts about the future needs of the humans and the society. In the last few years voices have been raised for a change, companies need to take their responsibility regarding sustainable development.The purpose of the report is to describe and explain possible relations between sustainabil-ity performance of companies and profitability, valuation, industry and size respectively.To be able to judge the sustainability performance of the companies Folksam (2006a) have been used. This is a solid investigation of the companies listed on the A- and O-lists of the Stockholm Stock Exchange by the end of 2005. The sustainability marks have been com-pared with the chosen key values for each hypothesis respectively. With this quantitative data as foundation, a quantitative approach and a deductive method have been used.In the first area of the investigation, profitability, the authors found correlation for the main hypothesis between sustainability performance and ?Return on Total Assets? through a statistical test.

The incineration of waste is steadily increasing in Sweden and so is the production ofashes. The bottom ash has for many years been used as construction material inlandfills. Now many of the nation's landfills are closed and there is a great need to findanother beneficial use for the ash. Bottom ash is a gravel-like material and with itsmaterial properties it can replace natural gravel in parts of roads and surfaceconstructions. Today this use is only approved within landfill areas where leachate iscollected and checked.

Under höstterminen 2013 har Stefan Erlandsson och Louise Andersson, designingenjörsstudenter på Högskolan i Skövde, utfört ett produktutvecklingsprojekt i samarbete med entreprenören Lars Willebrand. Målsättningen för projektet var att utveckla ett lyftverktyg som ska komplettera Willebrands produktserie bestående av; travers, svängkran, plåtbyrå och lyftverktyg. Lyftverktyget ska vara anpassat för att användas i kombination med en plåtbyrå, vilket innebär att det kommer användas till att lyfta material från höga och låga höjder. Lyftverktyget måste därmed konstrueras i syfte att underlätta för användaren och undvika arbetsskador som kan uppstå vid dessa lyft. Lyftverktyget ska även kunna anpassas till kunder som endast avser att lyfta skivformade produkter i midjehöjd.Projektet inleds med en förstudie där mycket fokus läggs på ergonomi och användaren.

Four different kinds of filter-materials with reactive surfaces have been studied concerning their capacity to absorb heavy metals in leachate from a municipal waste deposit. The heavy metals studied were: lead, cadmium, copper, mercury, chromium, nickel and zinc. The leachate contains high levels of dissolved organic carbon (DOC) and has a high pH-value along with a high buffer capacity. These characteristics of the leachate make it difficult to remove pollutants and require efficient filters. The filters that were examined in the report are blast-furnace slag with CaO, sand covered with iron oxides, olivine and nepheline.

Under början av 1990-talet inledde Volvo Personvagnar i Olofström en process där övervakning av robotiserad MIG/MAG-svetsning var i fokus. Det ledde fram till ett forskningsprojekt som resulterade i att Stefan Adolfsson, Lunds tekniska högskola/Blekinge tekniska högskola, 1998 presenterade avhandlingen Automatic Quality Monitoring in GMA Welding using Signal Processing Methods [5]. I den presenterades ett SPRT-baserat övervakningskoncept för övervakning av MIG/MAG-svetsning med kort- och spraybåge. För att få fram ett kostnadseffektivt övervakningssystem uppkom tanken att använda vanliga PC-datorer som plattform. De erbjuder hög beräkningskapacitet till förhållandevis låg kostnad. Examensarbetets mål är att implementera det SPRT-baserade övervakningskonceptet i LabVIEW på en PC och utvärdera realtidsegenskaperna.

This master thesis encompasses an inventory of the older industrial community of Gimo. Investigations of the contamination situation for each industrial area were done. A risk classification according to the Swedish Environmental Protection Agency?s ?Method of Surveying Contaminated Sites?, phase one, followed. The risk classification was done on areas of Iron Work, a rockwool industry and a landfill. Gimo have had iron manufacturing from 1615 until 1945. Gimo have had two blast-furnaces and two smithies periodically.

Since the 1980s, companies have taken a larger interest in quality and it´s economic impact within the company. Having the knowledge that it´s not quality that costs money, but it´s rather the lack of quality. The work immerses itself in the field of cost of poor quality and the development of key performance indicators.The thesis is performed at Bufab Holding in Värnamo. Bufab Holding is a trading company which mainly buys and sells C-parts. C-parts include fasteners, other small metal-, rubber- or plastic parts such as wires, springs and electronic fasteners.The aim of this thesis was to make a survey of the cost of poor quality and to find key performance indicators (KPI) for cost of poor quality that can be continuously monitored.