The incineration of waste is steadily increasing in Sweden and so is the production of ashes. The bottom ash has for many years been used as construction material in landfills. Now many of the nation's landfills are closed and there is a great need to find another beneficial use for the ash. Bottom ash is a gravel-like material and with its material properties it can replace natural gravel in parts of roads and surface constructions. Today this use is only approved within landfill areas where leachate is collected and checked.

Background: Since1994, the EU NickelDirective is limiting the release of nickel from objects that are in prolongedcontact with skin. Despite this, nickel is still the most common cause of contactallergy in industrialized countries. This could implicate that other productswith short contact to the skin, which are not restricted by EU´s legislation inREACH (Registration, Evaluation, Authorisation and Restriction of Chemicalsubstances), could be a source of nickel or cobalt exposure. There is no limitfor cobalt release within REACH. To determine if there is cobalt or nickelpresent on the surface of a material and if metal can be released in contactwith the skin, there are quantitative and qualitative methods, such as the DMG(dimethylglyoxime)-test, the cobalt spot-test and a method for releasedetermination according to EN1811.Objectives: Laptops are not included in the REACH legislation.

AbstractA prerequisite to be able to use semi-natural pastures in an optimal way is knowledge about their conditions and properties. One thing to consider is the amount of herbage mass that can be produced during one season on different types of semi-natural pastures. That knowledge makes it easier to choose which type of animals and how many you are able to have in each paddock to maintain a high biodiversity and achieve the desired production of the animals at the same time.This study was performed in nine different semi-natural pastures around Uppsala. The paddocks were already mapped with regard to different vegetation types. Exclosure cages were placed on previously fertilized, mesic, dry, shaded and wet vegetation.

AbstractAt Saltvikens copperindustry, which is located in the municipality of Oskarshamn, copper was refined from sulphiteore some hundred years ago. The ore underwent several steps in the process before the final product was received. These steps all had an influence on the environment through discharge of heavy metals. The area where the copper industry was located is today considered to be of specific national interest due to its valuable nature and cultural values, as well as its value for recreational outdoor activities. Therefore, it is important to determine the present level of contamination and if any transport of contaminants have occurred, and to identify the risks that are associated with the site both at present and in a longer time perspective.Thirtynine soil samples and 16 sediment samples have been analyzed.

Glulam?s position at the Swedish market for building constructions has been established over the past decades. Factors affecting glulam demand are found both in global and national contexts as well in customer attitudes and knowledge of the material. Arguments for environmentally friendly and sustainable construction processes and energy-efficient designs are nowadays common, which is something that should motivate increased usage of wood as a renewable material. For the glulam industry to increase its sales, improve profitability and thereby gain market share in present competitive climate, reliable market information and updated market intelligence is required.

Sustainable development has become more and more important over the past years. The term Corporate Social Responsibility (CSR) is closely connected to sustainable development and focuses on organizations responsibility towards the society and the environment in which it exists. Companies within the mining industry were among the first to initiate CSR-work due to the fact that they have a great impact at the local community, both socially and environmentally. Today they are still in the forefront of the development of CSR-questions in general, and community involvement and development in particular. Earlier studies made on this area have focused on the strategic level of community involvement and development.

Bakgrund och problem: Målkostnadskalkylering innebär att ett företag samarbetar med sina leverantörer för att tillgodose slutkundens önskemål och för att kontrollera kostnadsnivåerna. I vår uppsats undersöker vi vilka kontextuella faktorer som påverkar leverantörernas möjlig-het till inflytande inom ramen för en målkostnadskalkyleringsprocess samt hur leverantörer själva kan påverka processens förutsättningar.Syfte: Uppsatsens syfte är att skapa en förståelse för den problematik som finns kring vad som avgör hur mycket en leverantör kan påverka målkostnadskalkylering.Metod: Vi har använt kvalitativ metod, och som en del i detta personliga intervjuer, för att kunna få en bra kontakt och för att kunna förstå respondenten. Vid urvalet av företag utgick vi från Volvo Personvagnar och tre av företagets leverantörer, Autoliv AB, Bulten AB och Finnveden Metal Structures AB, som vi har valt ut så att alla inte har samma beroendeställ-ning gentemot Volvo Personvagnar.Resultat och slutsatser: En av de kontextuella faktorer som påverkar leverantörers möjlighet till inflytande inom målkostnadskalkylering är leverantörens beroendeställning till köparen. Ju större beroende, desto mindre går att påverka. En annan faktor som påverkar är typen av komponent som leverantören tillverkar.

This work consists of a survey and risk classification of eleven metal industries including foundries, finishers and engineering industries in two industrial areas in Mora. The study follows a method called MIFO (Method of Surveying Contaminated Sites) composed by the Swedish Environmental Protection Agency. In the method assessments of the degree of hazard posed by the pollutants, the level of pollution, the conditions of dispersal, sensitivity and the degree to which the area is worthy to protect are made for each contaminated site (object). The assessment classify the objects into four risk classes in which risk class 1 denotes a very large risk, 2 large risk, 3 moderate risk and risk class 4 little risk. The work of surveying using MIFO is divided into two phases.

Business unit Cylinder at ASSA AB in Eskilstuna are having problem with frictions in their production process. Changes are occurring and older products along with machineries are phased out and transferred to low-cost countries. This opens up possibilities to at a larger extend customize physical flows after production flows. The authors where given the task to analyze the production and find problem areas to improve and to give suggestion on how Business unit Cylinder can work to optimize their production flow.The aim of the thesis work is to come up with suggestions on how to reduce the lead time in production and how the tied up capital can be reduced. In more detail the task included to find problem areas that are counteracting an effective flow, give solutions on new flows for the production of the cylinder core, give suggestions for new stock points for the production and how the production shall be managed and controlled.During the last twelve months ASSA AB has sold over 700 different types of cylinder cores, and the product range is very wide.

The market is developing and a growing competition increases pressure on companies to maintain their competitive advantage. Working with cost savings is a way to enhance earnings in a short term but also in a longer perspective. Volvo Powertrain Production Köping has an overall goal; to reduce costs by nine percentages in three years. To achieve the goal, Volvo Powertrain Production Köping works with World Class Manufacturing where the Department of Processing Technology constitutes an important part.Volvo Powertrain Production Köping lacks a standard for how savings within the metal cutting tool area are to be calculated. This makes it difficult to control and monitor their business outcome but it also causes difficulties in controlling the tool suppliers? outcome.

The municipality of Västervik, with support from Envipro Miljöteknik AB, is carrying out a main study of the minefields at Gladhammar. Mining of iron, copper and cobalt under different periods from the 16th century until the end of the 19th century has led to discharges of metals to the lakes situated downstream. The aim of the main study is to investigate the possibilities to reduce the environmental load on the surrounding ground and water caused by heavy metals from the mine. The present report is a part of the main study. The aim of the work is to investigate the geochemistry of the groundwater.

SammanfattningDet här projektet behandlar området Additiv Tillverkning (AM) för metalliska material och undersöker om det är lämpligt att använda vid produktion inom flygindustrin. AM är en relativt ny tillverkningsmetod där föremål byggs upp lager för lager direkt ifrån en datormodell. Teknikområdet tillåter i många fall större konstruktionsfriheter som möjliggör tillverkning av mer viktoptimerade och funktionella artiklar. Andra fördelar är materialbesparing och kortare ledtider vilket har ett stort ekonomiskt värde.En omfattande litteraturstudie har gjorts för att utvärdera alla tekniker som finns på marknaden och karakterisera vad som skiljer de olika processerna. Även maskiners prestanda och kvalité på tillverkat material utvärderas, och för varje teknik listas möjligheter och begränsningar.

Never before have so many moved so frequently as now. Mobility lies at the centre for the concern ofstates, business and technological development. Some even claim that we are witnessing a mobility turn inthe social sciences. However, as the capacity to move has increased so too has the control and surveillanceof mobility become more extensive. Since September 11, 2001 security has been the defining paradigm fora variety for actors.

With the prospect of future construction on the Skutskär Pulp Mill property, Stora Enso Fine Paper has initiated an investigation of soil contaminants and a risk assessment of these contaminants. A soil and groundwater investigation has therefore been conducted on an open area of about 16 000 square meters, situated between the current wood room and digester house. To be able to integrate this study into an investigation for the whole industrial property, the study has been carried out as a phase 2 study according to the Swedish Environmental Protection Agency?s Methods of Inventories of Contaminated sites (MIFO).The site investigation has involved soil and groundwater sampling, together with the analysis of heavy metals and organic contaminants. The degree of hazard posed by the contaminants, the level of contamination, the potential for migration of the contaminants, as well as the degree to which protection of human health and the environment is required in the area, have been weighed together for an overall risk assessment of the area with regard to human health and the environment.The investigated area was built up by filling in the coastal waters.

SammanfattningDet här projektet behandlar området Additiv Tillverkning (AM) för metalliska material och undersöker om det är lämpligt att använda vid produktion inom flygindustrin. AM är en relativt ny tillverkningsmetod där föremål byggs upp lager för lager direkt ifrån en datormodell. Teknikområdet tillåter i många fall större konstruktionsfriheter som möjliggör tillverkning av mer viktoptimerade och funktionella artiklar. Andra fördelar är materialbesparing och kortare ledtider vilket har ett stort ekonomiskt värde.En omfattande litteraturstudie har gjorts för att utvärdera alla tekniker som finns på marknaden och karakterisera vad som skiljer de olika processerna. Även maskiners prestanda och kvalité på tillverkat material utvärderas, och för varje teknik listas möjligheter och begränsningar.