This thesis has been carried out to the Technology Group at industrial plant Tube Mill2012, which belongs to the Sandvik AB. Technology Group is a unit that takes care ofall requirements and suggestions regarding investigations, test runs and designmodifications. The main objective is to identify and analyze the existing initializationprocess to see where improvement opportunities exist and to come up withsuggestions for improvement, supported by previous research and literature. Anextensive literature search and case study has been conducted to provide a solidfoundation to refer to during the work. Completing the interviews and the workshopgave a clear picture of their unstructured work and approach, how the lowrequirements on the received orders caused problems for the group as well as thelack of a standardized resource allocation method provides major delay factors.Solution proposal then became a very easy process model in five steps with all theinformation gathered in one place.

Return handling is often regarded as a slow and complex process. Studies have shown that it is not unusual for a return to cost up to nine times as much as a standard outbound delivery. An efficient return handling process is therefore essential to all competitive companies dealing with logistics. This report investigates, analyzes and gives suggestions on development with the purpose to improve the return handling process at LensLogistics AB in Kista, north of Stockholm, Sweden. The study has been conducted from a deliberately practical point of view in order to suggest improvement suggestions possible to implement and thereby change the entire return handling process.

Problem: In society of today corporate competence is an important factor for survivor and development. IT is developing rapidly and can not be ignored by companies. Then need for people with IT-competence is conquent increasing. A survey of corporate IT-competence is therefore of interest for companies as well as for local authorities. To determine the IT competence within an organisation, this competence has to be measurable.

Background:IT development has in recent decades been fast progressing. In Sweden many schools have begun to invest in IT and new technologies. What happens at the schools that are investing in IT equipment and modern technology?Purpose:The purpose of this study is to elucidate the conditions for and the success factors and barriers that principals and teachers will experience in IT. Principals' experiences are complemented and mirrored against the teachers.

The purpose of this essay is to find out if liming with Ca(OH2) and CaO can reduce leachingof phosphorus from agricultural land and the problem with eutrophication. This purpose alsoincludes getting knowledge about how to make the phosphorus retained in the soil and beaccessible for the plants. This essay is supposed to show if more research is needed in thissubject. There has not been much research about this subject and therefore the amount ofmaterial to study is limited in this literature review. The research reports that have beenstudied have similar results.

This essay aims at understanding the experience of the use of ayahuasca, and similarities and differences between interview protocols and socio-cultural identities. The work is based on field studies conducted in the Peruvian Andes, in the village of Pisac September to November 2009. What has emerged is that the experience does not seem to be dependent on cultural manifestations as much as it is dependent on general human cognition. Theories have been applied on an empirical phenomenological descriptive study. Various brain activities, along with mental mechanisms contribute to a deeper understanding of the findings in the descriptive analysis.It seems that the cultural differences, which I have classed as typological in the phenomenological study, mostly are expressions of meaning for the informants.

 There is a lack of research in the field of quality improvement efforts based on profound knowledge in social services. The current situation is therefore a significant knowledge gap in terms of studies of this type of systematic quality work and how it is applied in practice. This study therefore intends to describe Pilbackens quality work and further examine if the profound knowledge is consistent with quality work in microsystems by an analysis of Pilbackens work. The present study has been performed by a qualitative method and the material is collected through semi-structured interviews. In order to analyze the study?s result have profound knowledge and the model microsystems been used.

The purpose of this assignment at SSAB Tunnplåt in Borlänge was mainly to investigate and describe the circumstances for the spare parts stored in storage facilities within the area of operation. Even new facilities which could serve as storage rooms and their opportunities for storing spare parts were an important part of the investigation. This because of the need for improved storing of spare parts. Furthermore, market offers where reviewed for storage of spare parts in more tailored designs. The work will culminate in proposals for improvement which is of importance for the development surrounding the storage and handling of spare parts.

This thesis investigates lacks in today?s use of the ERP-system Mapaz Affärssystem inthe production planning at Solna Pressgjuteri, and possible improvements. Today thedates calculated by the program to plan the orders are inaccurate and the ordersequence is not optimal, and therefore continuous manual corrections are needed.The approach was to study the program Mapaz to understand how it works, andidentify available parameters for input and output in the different tools offered in theprogram. By studying old lists of planned orders and relevant parameters in Mapaz forindividual orders, production groups, products and operations, the connectionbetween input and output parameters could be understood.Participating in planning meetings and discussions with the company behind theERP-system identified the current usage, desideratum and possibilities with theavailable tools. These were then matched to describe the reasons to the insufficientplanning and form possible actions for improvement.The work has showed poor understanding for the ERP-system and its functions, assome tools intended to assist the planning were not used, and some even usedincorrectly.

AB Sandvik Cormorant?s production unit in Gimo has identified a need to examinethe handling of products between operations with the purpose of generatingproposals of improvement for the product handling.The aim of this project is to study the existing manufacturing process and givesuggestions for improvement. The proposals should reduce the manual handling ofproducts, decrease the risk of damaging the products during the manufacturing andform a basis for increased traceability. Based on a mapping of the manufacturingprocess and the problem description, a specification of requirements has beencomposed.The mapping of the manufacturing process suggests that a change of the currentsystem is required. The company is recommended to decide how the producthandling between operations should be performed as guidelines for the productionteam.

The aim of this study was to compare perceived disability in daily activities, anxiety and depression for patients with chronic pain (>3 month), before and after rehabilitation. Another aim was to examine if there were any correlations between disability in daily activities and the extent of anxiety and depression before and after rehabilitation.For the measurements, Disability Rating Index (DRI) that measures disability in daily activities, and Hospital Anxiety and Depression Scale (HADS) ) which measures the extent of anxiety and depression were used. The study was carried out with 50 patients who had suffered from chronic pain and with the objective to return to work after rehabilitation. Of these, 90 % were female. The measurements were carried out at three measure points; before rehabilitation, seven weeks after rehabilitation and one year after rehabilitation.The main result did not show any statistically significant improvement in ability to perform daily activities.The only significant difference that emerged was an improvement in anxiety seven weeks after rehabilitation compared with before.

This examination report is a part of a program for Industrial organisation and Economics with specialization in Logistics and Management at Jönköping University. The report contains an analysis of the internal material handling at Kongsberg Automotive, and also an improvement proposal for a new material handling system.The aim with the report is to find a better material handling system and also make an analyse of the existing system. The goal is to shorten the distance for the operators when they order material, and also to increase the productivity.The investigation methods for the report have for the most part consisted of observations and interviews of key-persons who daily work in the production. During some time the actual material handling-system has been observed and some shortcomings have been discovered, and these are also discussed in the report.The shortcomings that have been discovered are for once the indistinct signal that should signal need of material in the production. Some other activities have also been discovered that does not bring any value into the final products.

This report describes an bachelor thesis work which is performed in cooperation with SVIA that develops and sells automation solutions for the manufacturing industry. The thesis purpose was to evaluate the machine FeedLine to find opportunities for improvement in the product?s design that could lead to more standardization and thus improving the efficiency of manufacturing and assembly.Based on these basic issues suggestions for improvements were developed:How can the design of FeedLine be improved to facilitate the assembly?Can more standardization be imposed on FeedLine?s design to enable more stocking of standard components?An initial pre-study was conducted to evaluate FeedLine?s to find opportunities for improvement in its overall design. During the pre-study staff at SVIA and two of its clients was interviewed. Based on information gathered during the interviews and observations by the authors improvements was amendments.

This master?s thesis has the intent of showing that the tattoo can be regarded as an individuals document according to prevailing notions in archival science. Suzanne Briets definition of the concept of document is used in this thesis as a widening definition, a document does not have to presented in a defined form, it is only required to represent an object or intellectual phenomenon and to be informative.Tattoos are presented in this thesis as informative with regard to the status and position of russian/soviet convicts and as such presenting an individuals identity within a specific context. As documents they also provide the individual with the essential evidence of his or her endeavours in a criminal environment. Also, they have the ability to function as an individuals memories of relationships, hardships and comradeships.

Today's fierce competition means that companies constantly must develop their business and internal processes. Focus on processes and continuous improvement is something that characterizes Lean Production which ICA logistics are applying with their concept Leading Logistics. Standardized routines for handling damaged gods were insufficient at the ICA distribution center in Kungälv. Handling and registration of damaged gods were not performed uniformly, resulting in problems with controlling and monitoring the process.The purpose of this thesis was to analyze and make recommendations how the process of internal handling of damaged gods could be improved. Therefore a comprehensive understanding was needed of the entire material flow through the warehouse and important quality aspects such as product safety and delivery reliability.The methods used are literature reviews, interviews and observations to produce a comprehensive process mapping of the current situation at the distribution center.