With increasing traffic congestion problems in bigger cities, it is becoming more and more important to provide the traveller with correct information about all transport alternatives. When doing that, the traveller gets the opportunity to make the best decision based on the current traffic situation. Instead of traditional travel planners, where public and private transport modes are presented separately, the co-modal travel planner offers a combination. In order to make the comparison correct and fair, the travel times have to be estimated realistically and on equal basis. This master thesis focuses on how to estimate travel times in the city of Stockholm for journeys by cars, public transport, bicycles and also for walking.An investigation of the available data on maps and travel times shows where the currently used methods are lacking.

The purpose of this study is to investigate how to use remote sensing data when making a forest management plan. The main focus of the study is to compare different methods to identify forest stands of a forest property, and by manual measures and estimates try to evaluate the quality of interpreting data. This report is based on survey questions sent to five different organizations working with remote sensing data. Only two of these where willing to participate in this investigation. The organizations where asked to analyze the same forest property and divide into compartments and make estimations of volume, basal area etc. in every stand.

At seed-growing the aim is to produce a commodity with high germination capacity, good soundness and purity, and also slight admixture of seeds from other species. The capacity of germination and the vigour of the seeds may become impaired in consequence of mechanical damage, infection of diseases, growth of mould, attacks of vermin, high drying temperature, secret germination, sprouting in the ears etc. The germ belongs to the outer and most unprotected parts of the seed, and consequently this is much exposed. Even quite sound seeds can instantaneously have low capability of germination. It can be due to the fact that the seeds are in rest of germination, i.e.

This report describes the construction work of a radar antenna for the radar systemCARABAS. CARABAS is a long wave airborne ground radar that has been developed bySAAB Microwave Systems and will now be mounted on a small helicopter, Schweizer 300.The antenna should be able to fold up and down. When the radar is in use the antenna islowered and under transport, start and landing the antenna is folded up. An emergency dropfunction should also be included in the design of CARABAS III.The extent of this report includes construction of the antenna, frame structure attached to thehelicopter, mechanism for folding the antenna up and down and mechanism for emergencydrop function. The mechanical design of the antenna and frame structure is based on modaland stress analysis, vibration measurement of Schweizer 300 and frequency analysis, andcalculations regarding aerodynamic drag and mechanics.The exciting frequencies of the helicopter and accelerations at those frequencies weredetermined by vibration measurement and frequency analysis.

AbstractThis report is about the creation of a test system for development of a control system for a off the shelf RC-helicopter, which can be bought for about two thousand SEK. The test system consists of both electronics for controlling the helicopter and mechanical constrainer. The constrainer is used for mounting the helicopter so that it won´t crash.A circuit board including processor and sensors was manufactured. This was used for doing test of the different control algorithms. In this way were we able to analyze the quality of the sensors chosen, and what other sensors that could contribute to the control of the system.Basic helicopter control have been studied and presented in the report.

Fortum has in a pilot project installed metering equipment with wireless communication in secondary substations in Stockholm. So far, the collected data are used only in specific projects.This master thesis was carried out at Fortum Distribution AB in Stockholm during 2013. The purpose of this study is to simplify and enhance the use of data in for example network planning process, by giving suggestions on how data can be managed and giving examples of analyzes that collected data can be used for.The electricity meter which Fortum has installed is a EDMI-Mk10A which is set to measure max/average/min values with a one hour time resolution of the following parameters: voltage (per phase), current (per phase) andactive power and active and reactive energy.In order to analyze the collected data an analysis tool is required. During this thesis two customized tools in Microsoft Excel have been developed, one for sorting data and one for analyzing.One aim of the thesis is to show examples of what collected measurement data can be used for. This work shows an example of analysis of active power, power factor, voltage, occurrence of interrupts and the relationship between outdoor temperature and power.This master thesis has among others resulted in the following advice: Expand the number of secondary substations with measuring equipment.

Examensarbetet genomfördes åt företaget Corus Byggsystem AB. Ett företag placerat i Halmstad som tillverkar profilplåt och lättbalk till tak och fasader. Företaget erbjuder även god rådgivning och skapar optimala lösningar för kunden.I företagets produktion finns det en maskin som pressar specialbalkar. Denna arbetsplats är varken produktionseffektiv eller ergonomiskt riktig då materialet och balkarna lyftes manuellt, i vissa fall även över huvudet. På tunga arbetsplatser är det oerhört viktigt att se över ergonomin, både för att förbättra säkerheten och för att öka produktionsvolymen.

The project has been oriented for development of fixtures to ateljé Lyktan to provide a more efficiency line. In the year 2012 the company invested in a new coating booth, which leads to opportunities to upgrading the fixtures and also new design. The request is to minimize the area for storage of fixtures, and therefore should fixtures be designed to apply as many articles as possible The priority of products that fixtures have development to has been products that are most frequently coated and new products that don?t have any fixtures. The product families that the project has been having focus on is TIME and FOVEA with RONDO. In the developing of fixtures have ideas been discussed with the staff, and instructions were made about how you are suppose to hang up the different products.

Environment friendly transports are one of the main topics in the industry and society today.Shell organizes an annual university competition called Shell Eco Marathon. The goal is to buildthe car that consumes the least fuel during a race. KTH participated for the first time in 2006.The engine for this competition, DoubleTwo, has been developed within the school. Theprinciple is a two stroke counter piston HCCI engine with variable compression ratio. HCCIstands for homogenous charge compression ignition.

Since the financial crisis of 2007, the global financial market has been characterized by instability. At the same time the banks? lending rates and its link to the reporänta have been in the spotlight in various debates in the media. The government with Anders Borg leading the charge has criticized the banks for not lowering their lending rates when the reporänta has been lowered. The banks defend themselves by saying that the reporänta does not have a direct link to their lending rates anymore.

Legionella can be prevented, the question is how. This report is a degree in construction engineering education at Chalmers University in Gothenburg. A comprehensive written publication for Legionella-safe plumbing installations is not available and therefore requested. The purpose of this report is to present preventative measures against Legionella bacteria growth in tap water and in other systems where Legionella bacteria are a potential problem. Technical solutions are presented including how different systems function and what their advantages and disadvantages are.

This examination work is the final work in our education to become a Bachelor of Science inMechanical Engineering by the University of Lund.The main purpose with this work has been to develop a new effective material handling system for TPPM AB in Lund since the existing system starts to become out of date. The future system that is going to be installed shall have the capacity to support all machines with unit-, semi- and finished goods during full production. The work has also included studying the possibilities to change the material flow in a positive way between the storage and the production when one is using existing buildings.During our work we have been used a simulation program called AutoMod, performing company visits, interviews and reviewed internal and external information to create a picture of what the best conclusion can be. During the work we have contacted five suppliers to receive system solutions and quotatioris. The suppliers, which have been contacted, are Swisslog, Moving, Rocia, Christensen & Hansen and ABB.

The main purpose of this study is to investigate in what ways librarians and schoolteachers can co-operate and combine their professional skills in order to help and motivate children with reading and writing disabilities, and how audio books can be useful in this work. The main source of information is interviews with teachers from ten schools in the province of Scania, southern Sweden. Those teachers, their schools and their local libraries all took part in a project spanning from 1993 to 1996, aiming at increasing the use of audio books in combination with the corresponding printed versions in work regarding the here addressed problem. This study was made with a qualitative empirical method supported by a normative theory belonging to the new institutional theory school. There are no statistical conclusions in the report.

The purpose of this study is to explore the factors affecting an individual's working life mobility and how this mobility is perceived by the individual. The study has a qualitative approach and the theoretical part is based on Castells', Giddens' and Bauman's theories of modern society and employment in relation to the individual. The study concludes that external circumstances in combination with internal driving forces are the reasons behind changing careers. The process is predominantly perceived as positive, especially education tends to strengthen self-identity. Work in general is regarded as important for a person's identity and new career changes are expected in the future..

The purpose of this thesis is to present and describe which criteria, according to the systemfamily Configuration Management, should be met when developing a CM-tool to handlemigration data.ACT is a tool developed by Microsoft to gather information about, analyze, test and mitigateapplications in a network when migrating the IT-infrastructure of an organization to a newoperating system. The organization that is being studied wants to present the data about theanalyzed applications in such a way, that a customer can choose what to mitigate and migrate.The goal is therefore to develop a prototype (CM-tool) that will present this data.The study has shown that ACT lacks certain requirements stated by the organization when itcomes to presentation. But when it comes to the rest of the functions, ACT performs as expected.The investigation resulted in specifications and technical solution for the new CM-tool. CMcriteriafor migration data was put forth and parts of the prototype were also developed..