Att leva med kronisk sjukdom påverkar personen och dennes liv på många olika sätt. Vardagen kan upplevas oförutsägbar och aktiviteter kan behöva anpassas efter tillståndet. Kronisk obstruktiv lungsjukdom (KOL) är en irreversibel och progressiv sjukdom som förutspås vara den tredje största dödsorsaken i världen år 2030. Syftet med denna litteraturstudie var att beskriva upplevelsen av hur det sociala livet påverkas hos personer med KOL. Arton kvalitativa vetenskapliga studier analyserades med kvalitativ manifest innehållsanalys.

This report is the documentation of a project in the education Master of Science in Mechanical Engineering. The project was carried out at Alfakonsult AB. The purpose of the project was to map out the transference of information between the different operators in the supply chain of medicine in Sweden and to analyse this in order to reduce lead-time and the total throughputtime. The supply chain of medicine in Sweden consists of producers, distributors, one wholesaler, prescribers and patients. The mapping of the transference of information showed that most operators in the supply chain have done well introducing technical aids to facilitate the transference of information.

The purpose of this thesis in Library and Information Science (LIS) is to examine concepts related to multiculturalism in Sweden. It aims to look beyond the rhetorical construction of these concepts, in an attempt to clarify the actual purpose of commonly emphasizing the importance of mulicultural library services. Norman Fairclough's critical discourse analysis (CDA) as well as theories on ethnicity and intersectionality constitute the theoretical frame. The material consists of selected anthologies, handbooks and articles in Biblioteksbladet from 1974?2014, as well as a small case study.

HAFA Bathroom Group has given us the assignment to develop a standardized back panel for their bathroom cabinets. This cabinet is going to be applied to most of their current and future cabinet solutions. To this point, they have constructed unique suspensions-and back panels for most of their cabinet models. They have also been forced to pull wiring and assemble the cabinets differently because of factors like; position of the wall sockets, dimensions of the cabinets and their shapes.The company wants to distance themselves from their current solution, firstly because the cost of having manpower to design each individual suspension solution, secondly because they will save a lot of money when the manufacturing process requires a minimum of components to be constructed. As a result of this, the company can use their resources better to develop future products.The main idea is that the consumer isn?t required to change the suspension or back panel when they decide to buy a new cabinet.

Before the European construction standards were introduced in January 2011, it was mainly themethod in BBK04 that was used for calculating punching capacity in concrete structures, and in lesscommon cases the method in BHB. The method of BBK04 is easy to use and have had the samestructure since the first was published in 1979. The Concrete handbook method (BHB) where usuallyonly used when a higher punching capacity was needed and the cross-sectional height where fixed,calculations using this method entails more work, but will in return usually give a higher capacity. Italso allows the use of shear reinforcement to increase the cross-section capacity. The method ofcalculating punching shear in EC2 differs largely from the methods of BBK04 and BHB.

The work has been carried out in cooperation with the company Zenit Design in Malmö. The project's goal was to restore, improve and produce an ozone generator. During the project, the authors sought relevant literature in databases, been in contact with US suppliers of fuel cell membranes, Asian suppliers for the processing of Teflon and Titanium parts in mechanical engineering and Swedish suppliers of various standard components. The authors had access to a temporary lab at Zenit and electron microscope at Halmstad University where material tests were performed. The authors have also had access to measurement equipment to measure amounts of ozone.During the work, the authors have mapped how an existing ozone generator works and then have their own development.

During the years of development in the 60s and 70s the need for new housing in Sweden arose. Sweden was going to be the most modern country in the world. This period has later been called ?the time of the big programmes?. One of the parts in this building of a welfare society was a large policy of building politics with few counterparts in history.

This report examines the industrialization of a newly developed household machine on behalf of Technogarden Engineering Resources in Karlstad, Sweden. The report is a part of the final course in the Bachelor Program in Mechanical Engineering at Karlstad University and takes place in spring 2014.An innovator, an investor and a engineering consultant firm have through collaboration developed a new type of gruel machine. The product is in its final stage of construction and is planned to be manufactured in a production located in Sweden, autumn of 2014.To compete against today?s trend in outsourcing manufacturing to low cost countries for better profitability, the industrialization of the gruel machine must be done with a minimum amount of resources in order to become successful, which also describes the problem of this study. Using pre-study material in form of Lean production literature, visiting a successful production site and gathering data from involved engineers a specification was developed which describes what this industrialization must achieve and which requests can be accomplished.

The construction industry stands as one of the industries in Sweden where most employees tend to encounter accidents. At the same time, the Swedish authority of work environment estimates that there are large numbers of hidden statistics with accidents and incidents that never gets reported. To prevent accidents, the Swedish authority of work environment has decided that every company have to, beside report every accident and major incident to the authority of work environment, keep statistics and evaluate every incident that happens at their places of work.The people responsible for work environment at the Swedish building contractor Peab, believe that it is only a fraction of all incidents happening at their construction sites that actually gets reported. The purpose of this study is to investigate the reason why employees of Peab do not report incidents. By an inquiry and interviews with both craftsmen and office holders at Peab Bygg Öst 1, the employees? attitudes and knowledge have been studied and evaluated.The study shows that the craftsmen´s knowledge of incidents is relatively low.

Globaliseringen och den ökade konkurrensen ställer större krav på företagen vilket har medfört att arbetet med logistik har utvecklats från att enbart förknippas med transporter av varor till att idag förknippas med effektiva flöden inom hela försörjningskedjan. Flödena inom försörjningskedjan består av material-, betalnings- och informationsflöden, där det finns en stark koppling mellan alla tre. En väsentlig skillnad mellan de tre flödena är att materialflöde och betalningsflöde representerar kapitalbindning i motsats till informationsflöde som inte hanterar ett direkt ekonomiskt värde. Det bidrar ofta till att informationsflödet förbises i effektiviseringsprocesser. Eftersom ett informationsflöde kan stå för avgörande indirekta värden är det en viktig pusselbit för att försörjningskedjan skall kunna nyttja sina resurser optimalt.

Den svenska byggbranschen står i nuläget inför en stor teknisk förändring, införandet av Bygg-informationsmodeller(BIM)/Virtual Design and Construction (VDC) i stor skala. Branschens olika aktörer ser olika vinster med implementeringen som kommer påverka hela byggprocessen, från projektering till förvaltning. Denna studie fokuserar på organisation och process i projekteringsskedet och grundar sig på en fallstudie av Veidekke Entreprenad AB. Företaget har implementerat VDC i delar av organisationen och i nuläget, efter lyckade pilotprojekt, utvidgas satsningen och implementering görs i större skala. Studiens syfte är att kartlägga Veidekkes VDC-mål och strategier, för att därefter studera process och organisation i projekteringsfasen och hur de bör utvecklas för att skapa goda förutsättningar för att VDC-målen ska kunna uppfyllas.

At seed-growing the aim is to produce a commodity with high germination capacity, good soundness and purity, and also slight admixture of seeds from other species. The capacity of germination and the vigour of the seeds may become impaired in consequence of mechanical damage, infection of diseases, growth of mould, attacks of vermin, high drying temperature, secret germination, sprouting in the ears etc. The germ belongs to the outer and most unprotected parts of the seed, and consequently this is much exposed. Even quite sound seeds can instantaneously have low capability of germination. It can be due to the fact that the seeds are in rest of germination, i.e.

This essay includes the planning and designing of a house as well as writing a rapport about howto increase fire safety in small buildings.More than 6000 homes burn in Sweden every year (Brandskyddsföreningen, 2012c). Thedevastation and the costs are usually very high. This report examines possible measures to reduceboth personal injuries and economic losses resulting from house fires in small buildings.Swedishbuilding regulationsplay a major role when it comes to constructional fire safety. However therequirements inSwedish building regulations are very low for small buildings and this is anargument for raising the requirements.The report shows and describes possible methods to build safer with regards to fire in terms ofmaterials and different building structures. Major focus has been on fire cells but other solutionsare also examined and described.

The purpose of this Masters thesis is to examine how young womens sexuality is described in Swedish youth novels. The analysis is based upon eight books of which four were published during the period from 1970 to 1975 and four books were published during 2000 to 2005. The theoretical framework is based on a gender theoretical perspective where Yvonne Hirdmans theories about a gender system and Ylva Elwin-Nowaks and Heléne Thomssons ideas about gender construction are crucial. Also Anthony Giddens theories about sexuality in the late modern society are used, where the plastic sexuality and the pure relationship are central ideas. The method is based upon textual analysis, and a model of analysis is constructed with its basis in the theoretical attempt.

AbstractThis report is about the creation of a test system for development of a control system for a off the shelf RC-helicopter, which can be bought for about two thousand SEK. The test system consists of both electronics for controlling the helicopter and mechanical constrainer. The constrainer is used for mounting the helicopter so that it won´t crash.A circuit board including processor and sensors was manufactured. This was used for doing test of the different control algorithms. In this way were we able to analyze the quality of the sensors chosen, and what other sensors that could contribute to the control of the system.Basic helicopter control have been studied and presented in the report.