AbstractThis bachelor?s thesis at the Department of Production Engineering at the Royal Institute of Technology in Stockholm deals with the subject of automated metrology. The degree of automation of tasks within production has been a growing trend but the measurement of quality has not followed the same trend. The main thesis follows:What incentives are there to automate the measurement of quality in production?What factors are crucial and why are not all metrology automated?The thesis comes along with a number of sub-queries and delimitations.The working method includes both theoretical and empirical studies.

This Master Thesis has been conducted as an assignment of the Swedish Defence MaterialAdministration and the Swedish Armed Forces and aims to examine the Target Location Error(TLE) of a Forward Observer System. The targeting accuracy of the system is vital if the systemis to be used as a sensor for precision munitions. The analyzed system, EOI (FOI 2000), wasdelivered to the Swedish Armed Forces in 2007. The targeting sequence starts with deciding theposition of the system with a GPS-receiver, continues with methods where the north direction issettled and ends by measuring the distance, direction and elevation to the target. When allparameters have been measured the system calculates the position of the target.

This thesis deals with query formulation in full text retrieval. The variables studied were query expansion and query structur[INS: e :INS , and the aim of the thesis is to study their co-effects on retrieval performance in a probabilistic system. The expansion was made with synonyms, and the structure by expressing facets and phrases. The study was performed using QPA, Query Performance Analyzer, which includes InQuery retrieval system and a sub-collection of TREC documents with its topics. The measurement used was precision at 11 DCV points.

Mattias MogardGustav von HeijneSammanfattningFör framgångsrika företag är det essentiellt att ha kontroll över sina resurser. Studien tar upp ett ämne som handlar om att skapa en överblick och en medvetenhet om resurseffektivitet inom ett företags produktion.Performance measurement är ett tillvägagångssätt för att kvantifiera aktiviteterna inom en produktion. Data struktureras genom nyckeltal, Key performance indicators (KPI:er), till övergriplig och användbar information. ISO 22400 är en uppsättning standardiserade nyckeltal med ändamålet att appliceras på automatiserad produktion. Studiens syfte är hitta vilka av nyckeltalen från ISO 22400 som är lämpliga att använda vid mätningen av en helt automatiserad produktionskedja som tillverkar motorblock.

ObjectiveThe objective of this study was to investigate the clinical application to use ASSR in anesthetized childrenDesignOne main ambition of the investigation was to compare hearing threshold using ABR with estimated hearing threshold using ASSR. Another aim was to examine if the duration of an ASSR measurement could be reduced by only using the frequencies 1, 2 and 4 kHz and exclude the frequency 0.5 kHz. This is a retrospective study using electrophysiological measurement from a database.ResultResults showed a high correlation between hearing threshold using ABR and estimated thresholds using ASSR, with the frequency 0.5 kHz showing a slightly lower correlation. Result also showed that the test duration was increased when using all test frequencies in ASSR-measurement compared to when 0.5kHz was excluded. ConclusionThe study showed a high correlation when comparing hearing threshold using ABR and ASSR.

The Swedish government have a goal that wind turbines shall produce 30 TWh by the year 2020, compared to about 3,5 TWh produced in Sweden during 2010. To minimize the disturbance that wind turbines create the Swedish Environmental Protection Agency has stated a guideline value that noise from wind turbines at nearby residents shouldn?t exceed 40 dBA, at 8 m/s wind speed. With advanced calculation models, like Nord 2000, the emitted sound from future wind turbines can be calculated at an early stage to optimize the power production without exceeding the 40 dBA. When the turbines have been built there is a need to verify that they really are within the guideline.

The Private Equity industry has over the past years been booming and major external environmental changes have made the industry transform rapidly. Increased competition between Private Equity firms is one of the reasons why the industry has been and is being forced to focus more on addition of value through increased operational management. Consequently, the focus of value addition is by some said to be transferred away from deal making and financial skills, and into active operative management. This case study investigates how the portfolio management, and more specifically the measuring and management of performance, is carried out in a number of leading Swedish Private Equity funds with investments in the biotech sector. The biotech sector is characterized by extensive research and development, and many biotech companies often lack income and other measurable financial parameters in the initial phase.

Background: Evaluation of lameness in horses is traditionally performed by a veterinarian who subjectively evaluates the movements of the horse. Accordingly, lameness diagnosis varies with the veterinarian and circumstances for which the horse is examined. Research within the area has long tried to establish an objective and standardized method for lamenessevaluation in horses. Several methods have been shown to be reliable and are used regularly within research, for example measurement of forces between the hoof and ground, and measurement of movements with high speed cameras or accelerometers. However these methods require considerable preparation, standardization, and expensive equipment as well as produce large amounts of data that are incomprehensible for the clinician.

Purpose: The purpose of this study was to investigate if there was a difference in the tear film?s osmolarity before and after drinking coffee. 'Method: All subjects in this study were asked to fill in a questionnaire to diagnose factors in their subjective symptoms, the questionnaire TERTC-DEQ. The subjects with a total graduated points of over 17 were not allowed to participate in the further measurements. In the study there was a total amount of 38 subjects, were 5 participated twice for both measurements, coffee and water.

Background: Peripheral arterial disease (PAD), as a consequence of atherosclerosis in the arteria of the limbs, affects one of ten Swedes older than 65. PAD can develop slowly and silently, and involves an increased risk for cardiac infarction and stroke. Measurement of the patient´s ankle blood pressure and calculation of the ankle-brachial index is an evidence-based method to discover PAD. Objective: To investigate how district nurses and general practitioners perceive this method of examination and experience possible obstacles to why it is not more commonly applied at primary health care centres. Method: Data collected by semi-structured interviews have been processed by qualitative content analysis with a manifest onset.

The purpose with this report is to make a contribution to Bodycote heat treatments workshop in Värnamo, how to introduce, establish and constantly improve its environmental system. The rapport will help Bodycote with there certifying in ISO 14001: s demand standard. Organizations who continuously work with environmental issues have a lot to gain. Two things an active environmental development process will convey are, building of thrust within the circle of customers, and great financial savings. An increasingly numbers of organizations realize the importance to introduce a functioning environmental system into their activity.

Authors: Maria Bergholtz, Alexander WestessonTutor: Daniel EricssonTitle: Performance Measurement of Creative work ? a culture study at PS CommunicationKeywords: Key Performance Indicators, Organizational Culture, Macro-culture, Subculture,Micro-culture, Art, Business, Creativity, PS CommunicationIn the paper?s introductory chapter, the chosen problem area regarding art and business willbe presented. The paper?s studied empirical case will also be introduced here. This then leadsto the reports chosen research questions:How do the company management and the companies? creative personnel approach differ inthe discussion regarding performance measurement on PS Communication?-What causes these differences?What impact does the corporate culture have in the discussion about performancemeasurement of PS Communication?-Is the corporate culture weak or strong?The purpose of this paper is to resolve the stand still in the discussion regarding performancemanagement by creating an understanding of different people active in the organization?sapproach to performance measurement.

This paper deals with the development of scientific geography during Antiquity from its mythical background before the seventh century BC to Claudius Ptolemy during the second century AD. The main focus is on questions concerning the shape of the earth, its place in the universe, size and mapping of the earth. Already before 400 BC, the idea of the earth as a globe was firmly estabished. During classical time, Aristotle used empirical and rational arguments to prove that the earth was a sphere and that it was situated motionless in the center of the universe. In the third century BC, the first reasonably correct measurements of the circumference of the earth was carried out by Eratosthenes.

To the sewer systems households, industries and other activities are connected. The wastewater is collected at treatment plants where a nutritious sludge is produced. The sludge does not only contain nutrients, but also hazardous substances originating from different activities in society. To reduce the flow of hazardous substances to treatment plants and to create a sustainable recycling of plant nutrients the Swedish Water & Wastewater Association has developed the certificate system REVAQ. This certificate requires a good quality of the sludge but also that the treatment plants maps the origin of the unwanted substances.

At present day there are several different methods for measuring of paved surfaces.The most common methods today are measuring with a total station, the GlobalNavigation Satellite System (GNSS) and terrestrial laser scanning (TLS). Recently thedevelopment of unmanned aerial vehicles, known as drones, has increasedexponentially and today there are several ways of using drones for measuring surfacesby photographing and laser scanning.This thesis contains a comparison between the methods terrestrial laser scanning(TLS), and unmanned aerial vehicle photogrammetry (UAV). The measurements havebeen applied on two different test surfaces, one of asphalt and one of gravel. Thepurpose of the comparison is to investigate whether the airborne photogrammetry isequivalent accurate in its height levels as the terrestrial laser scanning. For thecomparison to be more extensive, these two methods have not only been comparedin precision but also in the areas of ease of use and economy.The precision was analyzed by comparing the height levels in randomly placed controlpoints on the test surfaces.