At the Division of Electricity at Uppsala University there is an experimental rig forhydroelectric generators. The experimental rig?s vital part is a 12-pole synchronousmachine, whose electrical characterizing parameters (resistances, inductances andtime constants) are unknown. The aim of this thesis is to characterize the machine inits current state by perform a Standstill Frequency Response (SSFR) test. From theanalysis of the measurement data, which is a part of the test, a set of basic parametershave been received.

In today´s forestry, assessments of needs for thinning are based on basal area measurements. This is an indirect measurement. The approach and the developed assessment tables are based on an assumed production forest, which implies that management proposals in stands that deviate from the basic model may be misleading. Since Walter Bitterlich in 1948 launched the idea of the relascope, several modifications have been developed for different purposes. In common is that all are based on a certain angle measurement principle.

The mining company LKAB extracts iron ore in three areas in the north of Sweden, Kiruna, Malmberget and Svappavaara. The iron ore is refined and in the pelletizing plants the material is rolled to finished pellet product. The different steps of pelletizing plants causes among other things emissions to the air. It occurs occasionally stops in the production and the emissions are vented via an emergency chimney without purification. The aim for this work is to look into how LKAB may improve their monitoring of air emissions and control of ambient air quality and the analysis methods which are suitable for measuring.

Earlier models that measured de facto harmonization of international accounting mainly used indices and other related statistical models. Those approaches do not account for the relative importance of individual balance sheet items or expense items being harmonized. This paper therefore proposes a different approach using Runsten?s (1998) permanent measurement bias model. That way it is possible to quantify the harmonization process by accounting for differences among companies.

This project has revolved around finding better ways of overseeing vibrations of the gearbox at a wind power station. The gearbox has been a huge problem at the stations located at Gässlingen and the sooner the warning of an incoming breakdown is at hand the more money you can save from preparations. The work has been carried out together with Askalon AB in cooperation with consults from ÅF. Askalon is a company with a department focused on overseeing vibrations and it is in collaboration with that department the work has been carried out. During this work, new positions for the sensors and new methods of gathering and analyzing data have been worked out. This was then implemented at a wind power station to be tried out on site.

This report describes a study, description and testing of parts to an application adapted to the operating system Android. The application is supposed to measure the distance to a car ahead. Apart from distance measurements the ability of the application to calculate its own speed with the help of GPS is tested. From these two parameters, speed, distance and some constants the theoretical stopping distance of the car will be calculated in order to warn the driver if the car is too close to the car ahead in relation to its own speed and stopping distance.Tests were conducted on the different applications that were programmed and the result showed that the camera technique in the mobile phone itself limits the maximum distance of the distance measurement application. The max distance the tests in this thesis revealed was approximately 5 meters.

The aim of this thesis is to improve the control of urea injection at the combined power and heating plant Framtidens Gärstad (FTG). Tekniska Verken i Linköping AB is the owner of the plant.The FTG plant consists of a boiler where garbage combustion is done. From the combustion nitrogen oxides are emitted. These nitrogen oxides are hazardous to the environment. To reduce the nitrogen oxides, injection of urea into the boiler is used.

AIMS AB is a Swedish company that develops and sells inertial sensor systems. A new product is under research which basically is an aided inertial navigation system where unwanted drift is eliminated. This can be done by integrating a GPS reciever into the system and fuse measurement data from GPS and IMU. Such a product is useful in racing, where engineers always are searching for the optimal performance and the shortest lap times. Today the only feedback the engineers and mechanics get from their work is the driver?s comments and lap times.

The objective of this study was to study the agreement between two methods of indirect bloodpressure measurement in dogs and cats and to establish the within-method variation for the methods. The utility and practicality in the clinical setting were also evaluated for the both methods. The techniques evaluated were the oscillometric method and the Doppler ultrasonographic method. Thirtytwo dogs and 26 cats were used in the study and seven dogs and five cats out of these animals had diseases that may effect the bloodpressure. Bloodpressure was measured in both anesthetized and in conscious animals.

To be able to measure high-surge voltages and transients with short rise times youneed measuring instruments with a high sampling frequency and large Bandwidth.These surges and transients occur primarily at lightning but can also occur at forexample at connecting errors at an electrical switch-gear. This report describes thework with finding two solutions for measuring and log data from these surges andtransients. One temporary solution where a measurement program has beendeveloped. A second solution where different company solutions have been analyzedto decide which fits best. For these measurement solutions two solutions for bringingdown the voltage has been used.

To be able to measure high-surge voltages and transients with short rise times youneed measuring instruments with a high sampling frequency and large Bandwidth.These surges and transients occur primarily at lightning but can also occur at forexample at connecting errors at an electrical switch-gear. This report describes thework with finding two solutions for measuring and log data from these surges andtransients. One temporary solution where a measurement program has beendeveloped. A second solution where different company solutions have been analyzedto decide which fits best. For these measurement solutions two solutions for bringingdown the voltage has been used.

Authors: Maria Bergholtz, Alexander WestessonTutor: Daniel EricssonTitle: Performance Measurement of Creative work ? a culture study at PS CommunicationKeywords: Key Performance Indicators, Organizational Culture, Macro-culture, Subculture,Micro-culture, Art, Business, Creativity, PS CommunicationIn the paper?s introductory chapter, the chosen problem area regarding art and business willbe presented. The paper?s studied empirical case will also be introduced here. This then leadsto the reports chosen research questions:How do the company management and the companies? creative personnel approach differ inthe discussion regarding performance measurement on PS Communication?-What causes these differences?What impact does the corporate culture have in the discussion about performancemeasurement of PS Communication?-Is the corporate culture weak or strong?The purpose of this paper is to resolve the stand still in the discussion regarding performancemanagement by creating an understanding of different people active in the organization?sapproach to performance measurement.

To be able to measure high-surge voltages and transients with short rise times youneed measuring instruments with a high sampling frequency and large Bandwidth.These surges and transients occur primarily at lightning but can also occur at forexample at connecting errors at an electrical switch-gear. This report describes thework with finding two solutions for measuring and log data from these surges andtransients. One temporary solution where a measurement program has beendeveloped. A second solution where different company solutions have been analyzedto decide which fits best. For these measurement solutions two solutions for bringingdown the voltage has been used.

The determination of the optical properties of biological tissue is an important issue in laser medicine. The optical properties define the tissue´s absorption and scattering behaviour, and can be expressed by quantities such as the albedo, the optical thickness and the anisotropy coefficient. During this project, a Measurement system for the determination of the optical properties was built up. The system consists of a double integrating sphere set-up to perform the necessary reflection and transmission measurements, and a computer algorithm to calculate the optical properties from the measured data. This algorithm is called Inverse Adding Doubling method, and is based on a one-dimensional transport model.

Examensarbetets syfte var att skapa ett generellt mät- och styrsystem som är möjligt att fjärrstyra över Internet. Systemet består av en kontrolldator och ett antal separata moduler, vilka var och en realiserar någon typ av mät- eller styrfunktion. Användningsområdet för ett sådant system är brett; det kan exempelvis användas inom automation av bostäder, för process-övervakning och styrning inom tillverkningsindustrin, eller inom under-hållningsbranschen.Eftersom ett fullt utbyggt system kan bestå av ett drygt 100-tal olika mo-duler, är det här examensarbetet av praktiska skäl begränsat till att rea-lisera en handfull av dessa. Då systemet är enkelt att skala upp, är den be-gränsningen i antalet realiserade moduler i prototypsystemet inget som påverkar de erhållna resultaten. Exempel på storheter som kan övervakas är temperatur, avstånd, lufttryck och ljusstyrka.