Sök:

Sökresultat:

11432 Uppsatser om Material utilization - Sida 5 av 763

Termomekanisk utmattning av Sanicro 25 : Materialmodellering med finita elementmetoden

The report aims to describe the austenitic stainless steel Sanicro 25 from a thermomechanical point of view. The thermal and mechanical properties of the material make it suitable for use in coal ? and thermal power plants. By the use of Sanicro 25 it would be possible to bring the efficiency of these plants up while bringing the carbon emissions down.A material model is created from material testing and validated through simulation in the finite element software Abaqus. The model that has been derived describes the material behavior during loading and stress relaxation for the first cycle in a thermomechanical fatigue test well.

Information per sträcka

Jag har låtit min yttre miljö vara en stark tongivare och låtit det förenas med mitt verk. Det mesta av mitt arbete har jag utfört i min egen verkstad. Det är en ateljé utformad runt en traditionellguldsmedsverkstad med de verktyg och material som hör till. Där har jag omgivit mig med bilder, material och föremål som intresserar mig.Resan och förflyttandet mellan HDK och min verkstad var min utgångspunkt. Det har jag dokumenterat och uttryckt i olika material..

?Matteboken, det är där man lär sig?eller? : En undersökning av lärares och elevers inställning till användandet av laborativt material i förskoleklassens matematikundervisning

Syftet med vår undersökning var att ta reda på hur läraren och eleverna ser på användandet av laborativt material i förskoleklassens matematikundervisning. Undersökningen genomfördes med hjälp av observationer och intervjuer av tre lärare och nio elever i samma kommun. Resultatet visar att lärarna och eleverna ser olika på användandet av laborativt material. Lärarna förhåller sig positiva till användandet och menar att de alltid har stöd av laborativt material i undervisningen. Eleverna däremot visar en osäkerhet kring syftet med användandet av materialen och har svårt att se det matematiska innehållet..

En studie om vad tre klasslärare anser om laborativt arbetssätt i matematik

Syftet med detta examensarbete var att undersöka vad tre klasslärare för årskurs 1-3 anser om laborativt material i matematikundervisningen och hur de själva arbetar med detta i sin egen matematikundervisning. Detta undersöktes med hjälp av en kvalitativ studie med intervjuer och observationer. Observationerna användes för att se om det som lärarna ansåg om laborativt material speglades i deras undervisning. Med intervjuerna kunde vi ta reda på vad lärarna ansåg att det kan finnas för möjligheter och hinder med användandet av laborativt material i matematikundervisningen. Resultatet visar att lärarna överlag är positiva till användandet av laborativt material.

Den ortodoxa kristendomen i skolan : En analys av den ortodoxa kristendomen i svenska läromedel

This essay is about the representation of orthodox Christianity in Swedish educational material. With the help of my analytical approach inspired by Michel Foucault, I have studied material used in school for the subject Religion. I have limited the educational material in two ways. First, the main reason for this is that I am only interested in material written and produced from the year 2010 until today. Secondly, the material I have chosen to focus on is written for the grades 7-9 and for high school.

Intern materialhanteringsutveckling på Kongsberg Automotive AB

This examination report is a part of a program for Industrial organisation and Economics with specialization in Logistics and Management at Jönköping University. The report contains an analysis of the internal material handling at Kongsberg Automotive, and also an improvement proposal for a new material handling system.The aim with the report is to find a better material handling system and also make an analyse of the existing system. The goal is to shorten the distance for the operators when they order material, and also to increase the productivity.The investigation methods for the report have for the most part consisted of observations and interviews of key-persons who daily work in the production. During some time the actual material handling-system has been observed and some shortcomings have been discovered, and these are also discussed in the report.The shortcomings that have been discovered are for once the indistinct signal that should signal need of material in the production. Some other activities have also been discovered that does not bring any value into the final products.

Byggnadslogistik i infrastrukturprojekt för effektivare användning av grävmaskiner

Detta examensarbete har utförts på högskoleingenjörsprogrammet för Byggteknik och Design vid Kungliga Tekniska Högskolan i samarbete med Svensk Bygglogistik AB. Arbetet diskuterar betydelsen av byggnadslogistik i ett infrastrukturprojekt för att uppnå en högre utnyttjandegrad för grävmaskiner med stöd av logistiksamordningsverktyg.Sammanlagt har 2150 mätningar utförts under två veckors tid för att kartlägga utnyttjandegraden för en bandgrävare (EC250CL) och en hjulgrävare (Atlas 1505M) på ett referensprojekt i Stockholmsregionen. Resultatet har sammanställts separat för de olika resurserna genom att redovisa och analysera andelen outnyttjad tid och de bakomliggande orsakerna till den outnyttjade tiden.Resultatet visar att utnyttjandegraden för bandgrävaren är 53 % och 59 % för hjulgrävaren vilket tyder på att ett förbättringsutrymme finns.Avslutningsvis diskuteras rekommendationer för hur användning av logistiksamordningsverktyg kan utökas inom anläggningssidan..

Att överföra kunskap - En kunskapsteoretisk granskning av "Knowledge Management"-system

The right usage of tacit and explicit knowledge is becoming increasingly important for businesses worldwide. This thesis searches the answer to how management consultants tackle the challenges originating from converting this type of knowledge into codified use. With the help of a case study analysis it was possible to gain special insight into the processes of knowledge collection, codification and re-usage at a major organization built upon knowledge utilization. In order to provide the reader with a wider picture, the main subject of the study has been analyzed from two perspectives: a practice based and an objective based perspective. Furthermore, two different types of knowledge, tacit and explicit have been differentiated and studied in relation to each other, to gain a better understanding of their origin and conversion process.

Tillvaratagande och återanvändning av träbyggnadsmaterial : tjänstedesign för återbruk inom byggsektorn

The purpose of this Bachelor degree project is to design different types of services that can increase the amount of re-used timber within the building sector and by that means improve their environmental efforts. By examining how the sectors environmental work concerning recycling and re-using timber as a building material is getting on at present, conclusions have been drawn about what further could be done for improvement.The project has shown that there is a scarcity of information and statistics within the sector, but that there are efforts in progress to change this. Questionnaires have been sent to a number of companies working with demolition and utilizing re-usable materials in order to find out what kind of problems there are within the trade. Unfortunately the survey gave insufficient result due to the low reply frequency.It is obvious that active environmental work within the building sector is important and the knowledge acquired while working with the project has led to the design of three suggestions for services regarded as being of interest for improving the negative environmental impact caused by the sector:Suggestion 1 ? Sale of construction parts prior to the demolition of a buildingSuggestion 2 ? Re-utilization circulation when manufacturing buildingsSuggestion 3 ? Education in relation to the purchase of houses  The positive and negative qualities of the suggestions have been examined with SWOT-analysis and further adaptions and the results have been interpreted.

The effect of abolishing milk quotas : a study of comparative advantages amongst European member states

The European Union provide 27 % of total volume raw milk produced in the world. This number is steadily decreasing due to that the world milk production increase is more rapid than EU production growth. The growing middle-class change the demand for food, a higher standard of living increase the demand of milk products as well as other various animal products. Since 1984 the EU milk quota has limited the supply from EU, but the quota will expire April 1st 2015. The European Milk Board expect that the removal of quotas will make the farm gate price decline.

Barns pedagogiska material : En kvalitativ studie om barns användning av det pedagogiska materialet som finns på fem förskolor och om sex pedagogers tankar kring placeringen av det pedagogiska materialet

?Childs pedagogic material ? A qualitative study of child?s use of pedagogic materials available at five nursery schools and about their teachers thoughts about the display of the pedagogic material?In the nursery preschool the environment and the educational materials have always had a central place. That's why it has been chosen to study and observe five preschools and interview sex teachers, in an attempt to understand the teachers thought about the choice of material and the choices of material that the children used. The reason I do this is to see what the underlying idea about the materials the children use is, and why educators choose to make certain materials visible. The purpose of this study is to examine the educational materials that are used to stimulate children´s learning and examine what determines the choice of educational materials.

Återvinning av industriell restvärme som värdeskapande process : En fallstudie på SSAB EMEA i Borlänge

The industrial sector accounts for a large share of greenhouse gas emissions. To reduce its negative impact on the environment is crucial in the quest for a sustainable future. In discussions of the industrial sector's impact on the environment guidelines have been highlighted as a tool to assist the industries in their efforts to change the relationship between the consumption of energy and production. This by improving energy efficiency and a shift to the best available technology. During the past 30 years the steel industry has reduced its energy consumption per ton of steel produced by 50 percent.

Pedagogiska hjälpmedel för barn med koncentrationssvårigheter : en undersökning om vilka material/hjälpmedel som finns till hjälp för barn och pedagoger i förskolan

Sammanfattning:Syfte och frågeställningarSyftet med denna undersökning är att undersöka vilka material/ hjälpmedel som används för att hjälpa barnen med koncentrationssvårigheter i förskolorna och att undersöka vilka för- och nackdelar pedagogerna ser med materialet/ hjälpmedel.MetodFör att undersöka vilka material/verktyg som finns i verksamheterna gjordes en webbenkät.Webbenkäten korsanalyserades med en intervju som gjordes i en särskoleverksamhet.ResultatResultatet av enkäten visade att pedagogerna använde olika färdiga material samt egenutvecklat material. Det positiva som framkom var att alla barn oavsett behov gynnades av att arbeta med materialet. Det negativa var att pedagogerna ansåg att de hade för lite schemalagd tid att leta efter passande material.Betydelse för läraryrketMin förhoppning är att denna undersökning ska hjälpa pedagoger i förskoleverksamheter med att lättare kunna söka passande material till barngrupperna. Min förhoppning är också att ge pedagoger en liten fingervisning om var de kan finna information gällande hjälpmedel för barn med behov..

Förpackningslogistik på Haldex Traction Systems AB

the most obvious problem at Traction today is the in-between handling that demands much time and resources. The reason is that the packages are not designed with handling in mind. Several of the packages of today also have a poor degree of utilization that means there is room for a fewer number of articles. That in turn means more packages, more transports, more storage space and more staff. On the basis of a specification of demands ? which take quality and environmental influence, as well as transport, handling and economy in account ? we have developed suggestions on new packages that will facilitate handling and lower the total costs, The time of handling will in some cases abbreviate to just a few seconds with the new packages.

Att vardagsanknyta matematikundervisning

Vi har genom intervjuer och klassrumsobservationer undersökt hur tre pedagoger i grundskolans tidigare år använder elevernas erfarenheter från sin vardag i matematikundervisningen, varför pedagogerna undervisar som de gör samt vad de använder för material i sin undervisning..

<- Föregående sida 5 Nästa sida ->