This report describes how a syringe pumpwas developed for Q-linea AB inUppsala Science Park as a bachelor´sthesis at Uppsala University. Thepurpose of the syringe pump is toreplace existing pumps in one of Qlineasdosage instruments. The reasons for whythe pumps are replaced are that they arebig and heavy. Therefore the task was todesign a smaller and lighter syringepump.The goal of the project was to create aprototype of the design that met themechanical requirements posed. Therequirements were met.In the report the work process can befollowed from the development of thespecifications to the final design andtests of the prototype.

This study is intended to give an impartial view of a young and complex program in Sweden titled Product Innovation Engineering program. The purpose of this program is to increase innovation capability in Sweden that will result in new companies, patents and economic growth. The results from this study might give some direction to future innovation initiatives, but should primarily serve as a tool for the PIEp participants. The study will focus on investigating the creation of the program as well as the development of its strategy. From weaknesses and strengths within the strategy of the program the study should also attempt to show its future potential.

With the huge amount of computers connected to the Internet the IP-addresses are starting to run out. The Internet Engineering Task Force, IETF, have decided that it is about time to exchange the old 32 bits Internet protocol, Ipv4, to a more modern 128 bits protocol called Ipv6. This thesis explores the possibility to install Ipv6 in different operating systems. By testing various operating systems and by set up criteria compare them to each other we give the reader a picture of how the installation is done. We also show which operating systems to prefer if you want to use IPv6.

Denna rapport, En jämförande studie av Svenskt Vattens och CAC:s syn på HACCP-processen, En utvärdering och ett praktiskt tillämpande av Svenskt Vattens Handbok för egenkontrollprogram med HACCP, skriven av Anna Järvegren Meijer (handledd av Kenneth M. Persson, professor vid Teknisk Vattenresurslära, Lunds Tekniska Högskola och Anne Levin, konsult på SWECO VIAK, Malmö) behandlar kvalitetssystemet Hazard Analysis and Critical Control Points (HACCP) och fokus ligger på tillämpning inom beredning och distribution av dricksvatten.Rapporten består av tre delar. I den första redovisas HACCP-processen och de arbetssteg som Codex Alimentarius Commission har tagit som praxis. Här jämförs också Svenskt Vattens syn på HACCP i Handbok för egenkontrollprogram med HACCP med just CAC:s. Det konstateras att skillnader finns då Svenskt Vatten har valt att inte följa CAC:s praxis till punkt och pricka utan utformat arbetsgången annorlunda.Den andra delen av rapporten handlar om hur användarvänlig Svenskt Vattens handbok är i praktiken.

This degree project is made for Sundbyholms Golf&Country Club in Eskilstuna. The aim of the report is to produce a website which include a golf course interactive guide and an online game. Programs that have been used during the project are Adobe Photoshop, Macromedia Dreamweaver, Macromedia Director, Discreet 3DS Max and the plug-in 3DS Max Exporter. The choice of programs are based on experience and knowledge from the university education Media and Communication Engineering at Linköping University. The golf course guide contains a 2D-guide (image) and a 3D-guide (interactive image).

During half a century the society has been changed from an industrial to knowledge-driven society. Industry companies have standardized requirements and companies that works with development in production has unique qualifications. The public employment office was created during a time that each tailored to then general requirements were dominating and the adaptation average appropriate worker and appropriate work where general. When the monopoly was stopped, crew companies begun to settle down on the market that flexibly adapt themselves to carried out now specialized needs that require sophisticated adaptation average work and job seekers. Companies lose the confidence for the public employment office and politicians threaten the organization with big closure.

Today, Ericsson Microwave Systems (EMW) uses non-graphical user interfaces in some of their Ada95 applications. EMW wishes to develope a more easy-to-use and platform independent graphical user interface (GUI) for their applications. To meet these requirements EMW has chosen to evaluate Java in GUI development with Ada95. To make it possible for the Java GUI to communicate with the Ada95 application, some kind of standardized interface is required. CORBA is a specification of such an interface.

This thesis has been performed for the company System Andersson as a part of the bachelors degree in information technology at the School of Engineering in Jönköping. The thesis is based on the development of an iPhone application.System Andersson has an application for Android that is being used for their MPS system (material and production control system). Their customers, however, have also showed interest in being able to use this application for iPhone.The students handle the subject of iOS developing, including the design of the application, the use of the development language Objective-C, the use of the scripting language of Json used for server connections and SQL.The primary goal with this thesis has been to improve the students knowledge in such subjects as application development for mobile platforms, in such areas as Xcode, which is the development platform that Apple uses and Objective-C, which is the development language being used. The result of this thesis is an almost fully functional iOS application, similar to the Android application with some functionality missing..

Balcony Art is an idea for a new kind of furniture group for those who have limited space on their balcony. This report will discuss conceptual and part of primary construction of the chair and table for use on balconies, how the products developed from an idea to primary, preliminary products.In the conceptual design part, the report will discuss how product requirements and specifications are developed and how these controls the design.In the primary construction, the report will discuss the products journey from sketch to functional CAD models and how the products of individual parts are designed and how the durability calculations affect the design..

Hur varierar proteinsammansättningen i ölet genomölbryggninsprocessen och hur stor skillnad är det mellan kornmalterna. Syftet med mitt examensarbete var att se hur proteinsammansättningenförändrades under olika steg av en ölbryggningsprocess.Proteinsammansättningen delades in i 3 grupper: 1) albuminer ochglobuliner, 2) hordeiner och 3) gluteliner. Dessa protein jämfördesmellan 2 sorters malt för att se om någon skillnad kunde ses.Ölen bryggdes efter ett standardrecept för pilsneröl. Under ölbryggningsprocessen togs prover ut vid bestämda steg och tidpunkter.Proteinsammansättningen bestämdes genom analysmetoden SDS-PAGE.Resultat: visade att ingen synbar skillnad på proteinsammansättningen mellan malterna kunde ses.Proteinsammansättning i de olika stegen var däremot tydlig, albumineroch globuliner är de enda protein som finns kvar i det färdiga ölet, varavde flesta är z-protein. ..

Den här rapporten är ett resultat av ett kandidatarbete på 20-poäng. Projektet som rapporten handlar om, beskriver hur utvecklingen av ett webbutikssystem åt ett flertal företag gått till. De har i sin tur köpt webbsystemet från företaget Opti Use som givit oss uppgiften. I rapporten diskuteras hur utvecklingsprocessen gått till och hur ett arbete med ett befintligt system upplevts. Rapporten beskriver även hur lösningen på uppgiften har tagit form och hur utvecklingsprocessen påverkat den.

This report is the documentation of a project in the education Master of Science in Mechanical Engineering. The project was carried out at Alfakonsult AB. The purpose of the project was to map out the transference of information between the different operators in the supply chain of medicine in Sweden and to analyse this in order to reduce lead-time and the total throughputtime. The supply chain of medicine in Sweden consists of producers, distributors, one wholesaler, prescribers and patients. The mapping of the transference of information showed that most operators in the supply chain have done well introducing technical aids to facilitate the transference of information.

The aim with this study is to illustrate the underlying causes of students? difficulties in Mathematics from a teacher perspective. The approach that has been used through this study is qualitative, method wise interviews were used. The selection for the study consists of five teachers with many years? experience in the subject of Mathematics.

För ett flygbolag är det viktigt att ha en effektiv planering av sina resurser. Att kunna utnyttja personal och flygplan på rätt sätt är en förutsättning för en fortsatt överlevnad på marknaden. Flygbolagens tjänstebestämmelser regleras idag enligt nuvarande BCL-D 1.15. Under våren 2004 har Luftfartsverket behandlat en remiss som utgör ett förslag på en eventuell förändring av dessa tjänstebestämmelser. Remissen är ett förslag som skall gälla det gemensamma regelverket EU-OPS.

The work has been carried out in cooperation with the company Zenit Design in Malmö. The project's goal was to restore, improve and produce an ozone generator. During the project, the authors sought relevant literature in databases, been in contact with US suppliers of fuel cell membranes, Asian suppliers for the processing of Teflon and Titanium parts in mechanical engineering and Swedish suppliers of various standard components. The authors had access to a temporary lab at Zenit and electron microscope at Halmstad University where material tests were performed. The authors have also had access to measurement equipment to measure amounts of ozone.During the work, the authors have mapped how an existing ozone generator works and then have their own development.