Problem: In society of today corporate competence is an important factor for survivor and development. IT is developing rapidly and can not be ignored by companies. Then need for people with IT-competence is conquent increasing. A survey of corporate IT-competence is therefore of interest for companies as well as for local authorities. To determine the IT competence within an organisation, this competence has to be measurable.

The manufacturing industry is currently in a short-term downturn while the competition is increasing. The result of this is that companies must find new ways to bring out their products. Traditional competitive strategies, such as low pricing, is not sufficient today as the customer is inquiring something more than just a good product. Higher demands are presented on an accurate, well functional, communication between customer and companies, as this has become an important strategic factor in achieving long-term profitability.The aim of this independent project was to analyze and evaluate the communication process between a company and its sales companies.In order to illustrate this process, a case study was carried out at Alfa Laval, their sales companies and employees at their distribution center in Tumba. In order to see the differences in attitudes between the management, the sales companies and the employees regarding communication and involvement a gap analysis were used.The theoretical part of the study considers theories about business mission, communication, involvement, quality and creating value.The result showed that a smaller gap exists between the sales companies and the management while a slightly larger one exists between the employees and the management.

The goal of this project was to make the requirement process at the Swedish Coastguard more effective. The first step to achieve this was done by locating bottle necks in the process with value stream mapping method. The result of this study showed that the biggest restriction in the requirement process was while examining older requirement documents to understand what elements were suitable for the particular project. This was followed by a study of literature, interviews and theory of Lean Production with the ambition to investigate how the requirement process was handled on other companies and how to improve the process on the Swedish coast guard. This led to a number of potential enhancements of the process which later was evaluated. Requirements written by different people in different organizations were analyzed in order to sort out if there were some similarities? which could be used as standard elements in a future standardization of the process.

The austenitic stainless steel 316L has been compared to duplex stainless steels to be able to highlight a choice of material for manufacturing of spare tanks used for cooling water at nuclear power stations on the Swedish west coast. In this report 316L and the duplex stainless steels 2205, 2304 and LDX 2404 have been compared according to corrosion resistance, strength, manufacturing aspects and prices. The steels arranged by increasing corrosion resistance: 316L < 2304 < LDX 2404 < 2205. The steels arranged by increasing strength (considering the thickness of the plates needed for construction): 316L < 2304 < LDX 2404 and 2205. The steels arranged by increasing price/tank: 2304 < LDX 2404 < 2205 < 316L.

Denna studie behandlar begreppen process och produkt. Syftet är att genom ett hermeneutiskt perspektiv undersöka några bildlärares syn på begreppen process och produkt i bildundervisningen på högstadiet. Tidigare har fokus legat på elevers färdiga produkt men idag är bedömningen i bildämnet mer fokuserad på elevers process (Skolverket, 2012:3). Undersökningen genomfördes genom  kavlitativa intervjuer. Intervjufrågorna är förankrade i Lindströms (2002:4-5) process- och produktkriterier.

The study aims to illustrate how women victims of male violence in intimate relationships are treated during the legal process and with professional perspective describe what women?s experiences considered to be in the legal process. The study also aims to draw attention to the interventions for abused women during the legal process.The results are based on interviews with professionals in the justice system, and on observations in the courtroom. Overall our results show that abused women are in need of a great quantity of help and support before, during and after the negotiation. The legal process is very stressful for the women.

Mapping a process enables a greater understanding of the work, and is standard to evaluate and improve a process. This thesis is conducted at Test Bed Mechanical Design at Scania in Södertälje. Test Bed Construction is a complex process, characterized by a large amount of creative work, technical challenges and coordination between different people and different organizational functions.The aim of the thesis was to identify the Test Bed Construction Process and to develop a visual model of the workflow that also served as support for the engineers in their daily work. During the mapping process, comparisons were made with previous research in lean product development to identify process improvement.A literature review on process mapping and process visualisation resulted in a method for process mapping. The study showed that research on process visualisation is neither structured nor well defined.

This is a thesis performed at GEMS PET Systems AB in Uppsala. GEMS PET Systems AB is a company within GE Healthcare. GEMS PET Systems develops and manufactures equipment for manufacturing of radioactive isotopes for PET which is a scanner used in medical applications. The systems includes an accelerator of cyclotron type and other support equipment. One system is shipped in two or three containers depending on order configuration.

This report describes an bachelor thesis work which is performed in cooperation with SVIA that develops and sells automation solutions for the manufacturing industry. The thesis purpose was to evaluate the machine FeedLine to find opportunities for improvement in the product?s design that could lead to more standardization and thus improving the efficiency of manufacturing and assembly.Based on these basic issues suggestions for improvements were developed:How can the design of FeedLine be improved to facilitate the assembly?Can more standardization be imposed on FeedLine?s design to enable more stocking of standard components?An initial pre-study was conducted to evaluate FeedLine?s to find opportunities for improvement in its overall design. During the pre-study staff at SVIA and two of its clients was interviewed. Based on information gathered during the interviews and observations by the authors improvements was amendments.

The purpose of this paper is to describe methods to computerize a library and to compare theory with a process in a school library. The case study is based on a school library called Sunnerbogymnasiet which is situated in Ljungby. My questions are;- Which methods are parts of the process to computerize a library?- Which methods are used in the process in Sunnerbogymnasiet?- What does the practical process look like compared to the methods described in theory?In the paper I present the methods in the process according to the studied literature and compare these with a process at Sunnerbogymnasiet. The most significant result is that cooperation between the school library and the community library was the most important reason for the choice of library computer system.

The purpose of this paper is to survey the textile based proto-industrialism in Sweden in the middle of the 19th century. This case study is founded upon Anders Hansson?s pre-industrial textile production at the estate of Mölneby, Östra Frölunda in the rural district of Kind in the province of Västra Götaland.Account books from the year 1853 related to Anders Hansson?s wool fabric manufacturing have been looked into and categorized using a quantitative research method. The research has also been supplemented with a number of interviews.The result of the survey shows that Anders Hansson?s business activities fit into Mendel?s theory of proto-industrialists at a practice level.By collaborating with a merchant in Gothenburg the fabrics were traded in unknown markets, as well as in more familiar neighbouring districts.

This report deals with prefabricated bathrooms and the advantage, during the production process, they have compared to ordinary produced bathrooms.The work is done together with the building company JM. The common task is to investigate if the manufactures, in spite of standardized design can meet the concept of JM, i.e. high flexibility and adjustment towards the customer. In JM they are doubtful to the method, as they did not yet worked with prefabricated modules and think that the choises for the costumer will be limited.There will be a short resume of the progress of the bathrooms and its importance as sanitary and wellbeing.The recent problems with damage caused by damp in bathrooms. Have resultade in regulations.

Syntesdesign AB is an academic company that is supposed to enter the HIV drugmarket by manufacturing a "me-too"-drug with indinavir as the starting substance.Our task is to find 100 potential indinaviranalogues. Our further task is to suggesthow to perform a bondingassay to test the affinity for all these analogues. We willpresent a method, required equipment and calculated costs for the assay..

The purpose of this thesis is to examine the organizational buying behaviour in the purchase of travels abroad. We have conducted a case study of two companies, one medium sized and one larger. Our empirical studies have shown that the companies? buying process is divided into two types, the process of recruit a new travel supplier and the process of a straight rebuy of a regular travel service. In the recruiting process we found that the evaluation process of the purchase is an ongoing process that contradicts estab-lished theories.

This report is a master thesis performed by Adam Lundin at the company Sandvik Coromants production facility in Gimo. The work started in January 2013 and went on for the duration of 20 weeks, which is equivalent to 30 hp. The project was executed at the department GVR10. The scope of the project was to create a base for improvements in the purchasing process of direct material to the production. The background to the project was that the centralized purchasing department has gone through changes and decision was taken to decentralize the purchasing of direct material to Gimo.