This master thesis has been performed at Sectra Communications AB in Linköping where they Manufacture electronic encryption devices. In cryptology it is essential that an eavesdropper cannot find the plain text. To assure that a system is safe, all devices are thoroughly examined so that they don?t emit any secret information, so called Compromising Emanations (CE). This is done by comparing the secret signal with measured signals on the screen of an oscilloscope, a process that is very time consuming and furthermore, the risk of missing compromising emanations is high.

This Master Thesis is a product development project that has been carried out in cooperation withLappset Sweden AB.The purpose has been to develop a group of products suited for parks andtraditional playground locations. The specific target area has been courtyards of newly builtresidential areas. (These pieces of open land resemble glades that can be found in the forest,which in Swedish is called ?gläntan? and has given name to the product family). Therefore thedesign should match contemporary architecture.

This report describes a project carried out in cooperation with Klippan Safety AB. The purpose of this project has been to develop a product that facilitates the living area in a truck cabin for the customers. To be able to develop, in a structured way, that kind of product, the project has been based on different product development theories. The project contained of following parts: marketing research, product generation, product evaluation and prototyping. After information from the marketing research and discussions with the company, the decision was made that the task was going to consist an improvement of the existing product referred to as 'the comfort module'.

The work presented in this report is written at IEIs department on Linköping Institute of Technology. The report aims to increase the assembly efficiency at Wigells AB. The report shall be used as a guide for the implementation of changes at other workstations in the company. Together with Träcentrum in Nässjö, Wigells AB has identified the needs of this study and contacted IEI at Linköping Institute of Technology.In order to implement an efficient assembly line at the company, studies on lean production have been made. This theory has been studied and together with our own views and findings at the company we have analyzed the assembly area.Wigells is a small company that Manufactures wood furniture.

The task was to design and Manufacture a submersible displacement pump working with the wobble plate principle. The main task for the Wobble plate pump is to be used as a sewage pump for smaller households or dewatering pump in environments where small flows and high pressures are acquired. For these purposes ITT Flygt sell a screw pump, PC-Grinder 3068. The hydraulic part of the PC-Grinder is Manufactured by a subcontractor. Therefore ITT Flygt wants to evaluate an alternative to their screwpump PC-Grinder, which can be entirely Manufactured by them self.

AbstractThis thesis is the final part of the Innovation and Design Engineering Programme (180 ECTS credits)at the Faculty of Health, Nature and Engineering Science at Karlstad University. The extent of thisthesis is 22.5 ECTS credits and has been performed independently by Hannes Jernberg during thespring of 2013. Metso Paper Karlstad AB is the task maker of this project, and Arvid Johansson is thecompany Representative. Metso Paper Karlstad AB is one of the world leading developer andManufacturer of tissue paper machines.In the current situation, the company has developed and patented a power management systembased on a Cross Flow Turbine. The current construction is limited to a paper width of 2.9 meters.The company wants to take advantage of all the opportunities provided by the patents, to develop aturbine solution paper machine with a paper width that is wider than 5.5 meters, and give the abilityto Manufacture paper for lower energy consumption which is an important part of the production asit is very energy intensive.Problems arise with the increasing length of the turbine, ultimately resulting in that the deflectionbecomes too big and that the momentums, due to the increased torque the turbine blades breaks.By applying the design process, this work has resulted in a number of potential solutions to theproblem.

To meet the growing amount of waste from electronic and electrical equipment (WEEE) EU developed, year 2002, a directive (2002/96/EG) with the objective to govern the management and reduce the amount of WEEE. The directive is based on producer responsibility which makes the producer responsible for collection and dispose of WEEE. In 2012 a new revised directive (2012/19/EU), with tougher collection targets, was developed. Both the old and the new directive states that the approach to tackle WEEE should be prioritized in order of prevention, reuse and then recycling. Hitherto the amounts of WEEE has increased every year, making it relevant to examine which type of preventive measures the directive contains and how effective they are.

Corporate Social ResponsibilityThis thesis intends to exam the strategic use of Corporate Social Responsibility within fifthteen different companies, classified/divided into three various industries. The aim is to compare the three different industries, to look for disparities and similarities in their use of CSR. The disseration looks into both variance and resemblance in the use of Corporate Social Responsibility between the companies within the same branch of trade and between the industries.The industries of intrestThe three industries that the study has focus on is consumer, manufacturing and service related industries. Where the consumer industry is classified as companies with direct sales towards private consumers, the physical citizen. The manufacturing industry is classified as companies that Manufacture products but that does´nt sell their products directly to the regular consumer.

AbstractThis is a thesis done in cooperation with the firm Somas and University of Karlstad. The project is an independent final examination part of the program in Innovation and DesignEngineering comprising 22.5 points, and performed by Mia Myrén Zreloff during spring term 2012. In parallel and collaboration, Fredrik Kjellin performs a similar job for the same company and with the same extent, but for the Program in Mechanical Engineering.The client and supervisor at the company have been Magnus Jansson and Anders Josefsson. At Karlstad University has technical supervisor been Hans Johansson, and in the design- and development process it was Monica Jakobsson. Examiner has been Fredrik Thuvander, professor in the Faculty of Technology and Science at Karlstad University.The mission has been to make a basis work for the company's own development and make a computational model to calculate, visualize and implement materials and other solutions in the Manufacture of the company's ball valves.The project has undergone three major phases that included thorough study of the company, production, the problem and product.

The project ?Investment proposal for grinding station for service work of screw feeders? has been performed during the spring semester 2014 for the course Bachelor?s thesis for degree of  Bachelor of science in machine engineering at Karlstad?s University. The project has been performed in cooperation with Fiber Workshop which is a service department in the company Valmet AB. Valmet AB is a company that develops and Manufacture soft paper tissue machines. The screw feeder is a part that is used to feed, and squeeze out the water out of woodchips.

Volvo Cars in Skövde Manufacture and assemble Volvo engines. When attaching the ignition coil to all 4-cylinder engines, a special mounting tool is required. This mounting tool is currently Manufactured from injection-molded polyoxymethylene (POM), a thermoplastic. It has been noted that the life span of the tool is shortened as a result of abrasive wear that occurs during the attachment process of the ignition coil.An investigation of the possibility of manufacturing the mounting tool with a 3D-printer is undertaken in cooperation with ÅF, a consultant to Volvo Cars. A literature study is first presented to introduce broader knowledge on the subject.

The master thesis ?Mechanical Integration of an IR-detector in a Micro Cooler? has beenperformed at FLIR Systems AB in Danderyd. FLIR Systems is a world leader in the design,Manufacture and marketing of thermal imaging camera systems.The thesis project is divided into to two areas, Production Method and Noise.The Production Method concerns the positioning of a detector on the cold finger within the IRcamera.The detector has to be positiond with very high accuracy at the center of the cold finger,so it can be placed in line with the optical axis to avoid movement of the picture during zooming.The positioning of the detector is at present done with the help of specially designed guides on aplate on top of the cold finger. The design workes well but the special machining needed for thisplate is very expensive.The goal concerning the production method was to derive a new more cost effective method forthe assembling and positioning of the detector on the cold finger by replacing the guides on theplate with a reusable equipment or some other alignement operation.Several concept ideas have been generated with the help of concept generation methods in theform of concept classification trees and concept combinational tables. Two of these conceptswere selected to be further refined.

The competition policy in the EU should guarantee that the competition is not distorted in the way that would prevent or create difficulties for the free mobility of goods and services between Member states. It is prohibited for companies to abuse their dominant position according to Article 82, if it affects trade. The essence of Article 82 is control of market power. The perfect competition results when supply and demand appoint the price and quantity of a product. Firms are encouraged to compete then it results in efficiency, quality products and lower prices.

Abstract New methods, techniques and tools for the building industry are constantly being developed and improved and launched on the market. The problem in the building industry development is not that the products are not good enough. The problem is instead that the existing construction companies do not choose to use these innovations, instead they continue to employ the technologies they already possess and master. This leads to the fact that the construction industry is, in the public eye, beeing seen as a conservative industry. AquaVilla is a company that basically produces houseboats.

Detta examensarbete ämnar att undersöka samt föreslå hur kvalitetssäkring kan utföras för att införliva kundens behov och intresse till en färdig produkt som kunden vill köpa. Syftet är att skapa en fördjupad kunskapsbild kring kvalitetssäkring för företag. Utförandet sker genom en kvalitativ metodprocess i form av en fallstudie för att studera, analysera och beskriva fenomenet. Det är av intresse eftersom krav på kvalitet ständigt ökar då nya tekniska lösningar tillkommer och nya former av affärsverksamheter uppstår. Kunder kräver produkter med bättre kvalitet, lägre pris, bättre prestanda och allt detta till en ständigt minskad leveranstid.