The paper is a thesis made by three students in the engineering program at Jönköping School of engineering. The thesis was overseen by the urban planning office and features data from Jönköping County.The purpose of the thesis is to improve future central districts by improvement of work methods. The aim of this thesis is, through an evaluation of process mapping, develop a model for systematical work methods with better experience feedback in the urban planning. The following three questions have been answered:? How is the process mapping of the urban planning in Jönköping County built today and how did it affect the current district Kålgården?? How can the urban planning of Jönköping improve with a more systematical work method with better experience feedback?? How can critics elaborate the developed method to make it enough stable and in general applicable method to enforce on future districts?Literature studies and interviews were made to review the work methods of the office of urban planning as well as how their experience feedback works.

The study investigates questions and considerations emerging when stone in historic buildings needs to be replaced. The focus is on the surface treatment of stone in sandstone façades in pre-industrial buildings. That means buildings constructed by traditional methods and craftsmanship without the use of modern technology.The research issue originates from the extensive stonework that is planned for the façades of the Stockholm Palace. The project includes the replacement of large quantities of damaged stone to newly cut stone. This raises the questions about the use of modern and rational methods for surface treatment on the replacement stone.

AbstractTitel: The optimal salary system in the real estate industry Authors: Emma Bjo?rkman och Tere?se Emanuelsson Widstro?m Tutor: Tommy BergquistProblems background: The challenges companies face is to recruit, retain and motivate empolyees to work in a way that promotes the company. Skilled staff are difficult to recruit, more difficult to maintain and expensive for companies to lose but undeniably the most important key to success. How should the optimal salary system be composed to attract operators in a competitive market such as real estate industry, with a predominance of commission based salary?Purpose: To examine how the salary system is linked to motivation and goals in the real estate industry.

Grubbe Ventilation AB is a sheet metal and ventilation company who provides design, installation, service, and repair of ventilation. The company is expanding their business by building a new facility in Umeå, Västerbotten. The property is designed to be used for both office and industrial work.Grubbe Ventelation AB has not yet decided upon wish system which is to be established to provide the building with heating and cooling. The consulting firm Umeå Projekt Team has therefore been asked to investigate the possibilities to invest in geothermal- heating and cooling.If the investigation of a geothermal heating- and cooling system would provide favorable results it would be a very appropriate alternative that provides energy at low costs and are an environmentally friendly option as the energy comes from stored solar energy in the ground is provided by stored solar energy in the ground.The facility ´s heating and cooling consumptions are calculated in the program BV2 and the result indicate a heating demand of 185 000 kWh per year due to thermal transmittance, transmission losses, heating of warm water and a cooling requirement of 5500 kWh.Three different systems of geothermal heating and cooling were tested in the computer program Energy Earth Design. The results show no difference in the dimensioning of the drill hole if merely heating were to be used or both heating and cooling were to be established.

Micronic Mydata AB utvecklar och tillverkar maskiner för att automatisk montera elektroniska komponenter på kretskort, s.k. ?Pick and place? (PnP) maskiner. Komponenterna blir lokaliserade och inspekterade optiskt innan de monteras på kretskorten, för att säkerhetsställa att de monteras korrekt och inte är skadade. En komponent kan t.ex.

This final thesis aim to create a support that can decrease the uncertainty when planning the cable drum flanges lines that produces cable drums in the interval 100 to 320cm in diameter at Vida Packaging in Hestra. The purpose attains through finding an optimal batch size that minimizes the total storage cost and order prime cost, without degenerate delivery capacity to the customer. Through survey the sale and stock balance development during 2005 and 2006 for cable drums in Hestra and give alternative suggestions how to plan the production after installing a new cable drum flanges line. The study also explores different ways of working during product change in existing nailing line, to minimize the order prime cost. Vida Packaging in Hestra is a part of the Vida group, which is Sweden?s largest privately owned sawmill group with seven sawmills placed all around southern Sweden.

Milk ejection in dairy cows can be inhibited if oxytocin is not released from the pituitary gland. The problem with inhibition of the milk let down is not new, but has recently regained interest. It is observed during different types of emotional stress, for example when cows are moved to an unfamiliar environment, during oestrus, changing from suckling to machine milking or when being milked for the first time. The aim of the study was to examine the extent of cows with disturbed milk ejection in Sweden. A survey was sent out to 1000 dairy farmers in order to collect data about herd size, housing systems and routines at calving and milking.

Every plan and program decided on by an authority or municipality, where the environmental impact can be considerable, must be environmentally assessed according to Environmental Code, the Planning and Building Act (PBA) and the Regulation on Environmental Impact Assessment.The purpose of this study is to examine the Environmental Impact Assessment (EIA) for The Region Development Plan for the Stockholm Region, RUFS 2010. The plan was approved by at that time the Regional Planning Office (Regionplanekontoret), which procured the process by consultants. RUFS 2010 includes two merged plans ie. a regional Development Plan (RUP) and the Regional Spatial Plan for Stockholm. It was necessary to establish an environmental assessment of RUP, but not for the regional plan.

Due to a constantly increasing competitive pressure it is of great importance to constantly strive for improvements in order to gain competitive advantages. Lean Production is a concept that has been introduced with the aim to minimize waste and increase profitability. The purpose of this report is therefore to investigate how to perform effective planning according to the principles of Lean Production, in companys with customer exclusive products, through a case study at Sandvik Mining and Construction (SMC), and to investigate how SMC kan improve their planning of drifting rods at the production unit in Sandviken.The study started by creating a theoretical framework, to describe the subject planning and planning based on Lean Production. This frame work constituted the base for the case study which took place at Sandvik Mining and Construction, and also for the model and planning tool that has been introduced.The result of the study is partly a general model with factors that contribute to a more effective planning. These factors has beed identifed as SMED, which focuses on reducing set up times and in the end to facilitate the planning.

Aim: The aim of the study was to investigate 1RM and what power could be generated in bench-press and half squat concentric at certain percentages of 1RM. Special interest was put to evaluate men (M) and women (K), strength trained (ST) verses non strength trained (EST) in generating absolute power as well as power relative to 1RM.Method: In total 59 subjects mean (± SD) age 24.9 ± 4.1 years divided into four test groups: 20 male non strength trained GIH-students (EST M), 20 female non strength trained GIH-students (EST K), 10 male strength trained - sprinters on national/regional level (ST M), 10 female strength trained - sprinters (ST K) on national/regional level. They did two tests on 1RM and power in events of concentric bench-press and half squat in a Smith machine. In the first test session 3 ? 5 lifts were made to measure 1RM in each event.

Sedan införandet av bredverkande insekticider har frukträdsspinnkvalster, Panonychus ulmi orsakat skada på äppelodlingar i stora delar av den tempererade världen. Kemiska acaricider utvecklades först som en lösning, men deras höga toxicitet och kvalstrens förmåga att bilda resistens har gjort dem omoderna. En lösning på problemet är sprutning med oljeemulsioner, som främst har en fysikalisk verkan. Oljorna tillverkas av antingen mineraloljor eller vegetabilisk oljor och används traditionellt till bekämpning av övervintrande ägg på våren. För att bekämpningen ska vara effektiv krävs dock att den utförs när äggen är som känsligast. Äggen hos P. ulmi blir känsligare ju närmare kläckning de befinner sig.

With recent technical development computer aided design and manufacturing has taken amore important role in the product life cycle. New business segments such as Product/ServiceSystems and remanufacturing is emerging. This development demands better control of theproduct data throughout the entire product life cycle. Computer aided design is widelyrecognized and used within the manufacturing industries and in recent years the importance ofDigital manufacturing has increased. One part of Digital manufacturing is paperlessproduction which involves all orders and working instruction shown for example on a screenrather than on a piece of paper.

SammanfattningSyftet med studien var att undersöka om det fanns någon skillnad i muskelaktivitet ivadmuskulaturen när olika eller inget vadskydd användes vid vadpress. Jämförelsegjordes mellan vadskydd (A), stickat av ett modifierat polyolefingarn och ett tillstickningen identiskt och utseende näst intill identiskt vadskydd (B) av polyamid,samt utan vadskydd.Testgruppen bestod av 13 män från militärhögskolan i Halmstad. Testpersonernagenomförde vadpress i smithmaskin* på en belastning av 50% av 1RM*.Muskelaktiviteten mättes med hjälp av sEMG* och tre mätningar per persongenomfördes. Det första utan vadskydd, andra med vadskydd A och det tredje medvadskydd B. Resultaten visade ingen signifikant skillnad i muskelaktivitet mellan användandet avvadskydd A och vadskydd B eller mellan vadskydd A och utan vadskydd.Mätmetoden sEMG är känslig och kan ha gett missvisande resultat. Fler studierbehöver göras dels angående skillnad i muskelaktivitet och dels för att testavadskyddens eventuella andra egenskaper, positiva eller negativa.

All new households were to be constructed with "near zero energy house standards" (NZE-house) by the year of 2020. The ambition to construct energy-efficient buildings had to increase rapidly in the spring of 2013.The purpose of this report was to increase the interest for building contractors to construct apartment buildings with passive house standards. By locating and evaluating experiences from an existing passive house a case study including interviews, field visits and document analysis was made. Research of literature regarding other passive houses in Sweden also helped to answer the following questions:- What positive and negative experiences have the study of the passive house meant to the involved stakeholders and residents?- What improvements can be made based on identified experiences?- How can an apartment building be designed as a passive house based on possible improvements?By collecting good and bad experiences, as well as improvements and potential design proposals, a diagram was created designed as a tool for developers when constructing apartment buildings with passive house standards.

Hur resonerar potentiella kunder kring inköp av produkten som ens företag tillhandahåller? En av de främsta frågorna hos en marknadsförare, men också en fråga som är aktuell i vår marknadsekonomi i stort. Konsumentbeteende är därför ett givet fält inom företagsekonomin. Men hur går det till när konsumenten är ett företag? Vilka aspekter är viktiga och varför? Vilka marknadsföringsinsatser bör genomföras utifrån denna adderade förståelse? Det är utgångspunkten för denna uppsats.