Interest in the implementation of AGV-systems (Automated Guided Vehicle) has in recent decades increased. The reason is that it allows companies to perform reliably and secure internal transport while reducing the need of personnel. It is one of todays most advanced and complex material handling system that can independently make their own decisions regarding flow paths and traffic control. An AGV-system consists of transport units carrying cargo from point A to point B, and communicates using a computer.The purpose of this study is to develop a model on how to proceed in order to design an AGV system in heavy industry. The model is tested by a case study of a company in the metal industry to determine if the model works and gives the correct result.

This paper describes the development of a simulation model for the ambulance flow in the Västra Götalands-region of Sweden, and an analysis tool for the output of the simulation model. The aim of the simulation model was to be able to evaluate the outcome from changes in the ambulance operations, such as a reorganization of ambulances or an increase in intensity of the ambulance calls. This evaluation is meant to serve as decision support for the strategic planning of the ambulance operations. The analysis tool was developed to visualize the abundant geographical data produced by the simulation model in a meaningful way. The simulation model was validated against historical data which showed that the dispatch time for the highest prioritized ambulance calls corresponds well with historical data.

An information audit identifies, among other things, organizations information resources, the information flow and the needs of the information users. The purpose of this masters thesis was to describe the management of information within a local unit of Borås municipality by putting an information audit-method in practice. The focus was on three issues: What information needs could be seen in the organization? How does the information flow through the organization? How does Sugan Henczels seven-stage model serve as a tool to map the management of information within the local unit? The study only described the situation at a certain time at the chosen organization. The seven-stage information audit model was revised and adjusted to the studied organization by only carrying out four of the seven steps: Planning, Data collection, Data analysis and Data evaluation.

This paper describes the development of a simulation model for the ambulance flow in the Västra Götalands-region of Sweden, and an analysis tool for the output of the simulation model. The aim of the simulation model was to be able to evaluate the outcome from changes in the ambulance operations, such as a reorganization of ambulances or an increase in intensity of the ambulance calls. This evaluation is meant to serve as decision support for the strategic planning of the ambulance operations. The analysis tool was developed to visualize the abundant geographical data produced by the simulation model in a meaningful way. The simulation model was validated against historical data which showed that the dispatch time for the highest prioritized ambulance calls corresponds well with historical data.

I två analyser av filmerna; Do The Right Thing av Spike Lee (1989) och Hemligheter och lögner av Mike Leigh (1996), har jag undersökt  hur och varför samhällsproblematik  som berör klass- och rasfrågan presenteras på film utifrån hur cultural studies teoretiskt förhåller sig till problematiska relationer mellan kulturella identiteter i USA och Storbritannien. Jag kom fram till att identifikationen av den kulturella identiteten var olika i respektive länder; USA och Storbritannien. I USA var rastillhörigheten utgångspunkten för den kulturella identiteten och i Storbritannien var det klasstillhörigheten utgångspunkten för den kulturella identiteten..

This reports goal is the give BSR AB more information that's useful towards their customers in marketing of their products.It involves tests of different air filters designed for cars and 3D-modelling of Opti-Flow systems. The three models thats being tested is SAAB (93SS), VAG (1.8T) and Volvo (S60). To every brand there are three different models. A orginal- , sport- and an open cone air filter (Opti-Flow).The results indicate that the open Opti-Flow filter has better performance compared to the other cased filters. The sport filters for SAAB and Volvo has better performance then the original filter.

Purpose: The purpose of this thesis is to investigate potential associations between usage of the cash flow statement report and time perspective in which companies? acts and set goals. Method: Our approach is quantitative, using empirical data summarized in a statistical procedure. The result is thereafter analysed through the developed analysis model from which conclusion is drawn. Results: We have in the investigation stated that the usage of the cash flow statement report varies depending on the time perspective in which companies? acts.

Ericsson?s factory in Kumla, Modules Kumla, became a hub for radio modules and micro base stations, which enables mobile communication through radio base stations, in 2004. Because of this the factory focuses more on the logistics operations. This has led to a need to be able to plan the capacity for the materials handling system. This master thesis has therefore been performed at Modules Kumla to develop a capacity calculation model for the material handling flow during the autumn of 2005.The work has contained a mapping of the material handling flow regarding to which activities was performed and how much time they consumed.

During the past few years a vast amount of research has been done to increase the understanding of the complex ecosystem of the Baltic Sea. Modelling and simulations are important tools to increase knowledge of the system. A suitable model must be simple to use and the parameters and variables needed in the model must be easy to access.In this paper a dynamical mass-balance model, CoastMab, which is validated for smaller coastal areas, has been used to predict concentrations and transports of phosphorus in three large coastal areas - the Gulf of Finland, the Gulf of Gdansk and the Gulf of Riga. CoastMab uses ordinary differential equations to regulate inflow, outflow and internal flows. To reflect seasonal variations in temperature and different types of flows the model has a temporal resolution of a month.

Because of new emission and on board diagnostics legislations, heavy truck manufacturers are facing new challenges when it comes to improving the engines and the control software. Accurate and real time executable engine models are essential in this work. One successful way of lowering the NOx emissions is to use Exhaust Gas Recirculation (EGR). The objective of this thesis is to create a mean value model for Scania's next generation EGR system consisting of a poppet valve and a two stage cooler. The model will be used to extend an existing mean value engine model.

Three methods of sensitivity and unceartainty analysis have been applied to the operative stormwater- and recipient model StormTac. The study area is the watershed of lake Flaten in the municipality Salem. StormTac?s submodels for stormwater, pollutant transport and the recipient are cosidired. In the sensitivity assessment, the model parametres and inputs were varied one at a time by a constant percentage according to the ?one at a time? (OAAT) method and the response of the outputs were calculated.

There is a great need to reduce nutrient leaching from arable land into lakes and oceans. By using several different types of models it has previously been possible to describe nutrient losses in a catchment area with a minimum unit of sub-catchment level. At present, it is instead desirable to model a smaller catchment with an opportunity to re-connect the results to the corresponding fields in the catchment. Such models already exist but they are not fully able to properly describe Swedish conditions and land characteristics in our region.With the approach of creating such a model, SLU has developed a project with this work as its first stage. The model is expected to be created under the working name SWE-model which stands for Soil Water Environment and is in this first stage supposed to apply the SOIL model in catchment scale. During the procedure to describe the first step in the process of developing such a model adapted to Swedish conditions and which works in the catchment scale with an area of about 10-30 km2, focus has been set on calculating the transport of water flow from different hydrological response units. Regardless of the processes occurring in the soil after the water has been added, it is assumed that all the water which flows from each simulated unit is drained.In the first step the hydrologic response units were identified based on land use and soil type in the study area. With the help of a script with functions that retrieve and transform data, certain units were chosen for simulation. The script was also created in this project. Finally, the model results were aggregated and summarized for each unique unit, for each sub-catchment, and also for the whole catchment.From the results it is possible to see similarities in the flow dynamics between modeled and measured data. The efficiency coefficient has been calculated to correspond to the mean of the measured values for the whole simulation period. With an automated calibration process the model should be able to perform better. The volume error gives an indication of overestimation from the model..

Purpose: The purpose of this thesis is to investigate potential associations between usage of the cash flow statement report and time perspective in which companies? acts and set goals. Method: Our approach is quantitative, using empirical data summarized in a statistical procedure. The result is thereafter analysed through the developed analysis model from which conclusion is drawn. Results: We have in the investigation stated that the usage of the cash flow statement report varies depending on the time perspective in which companies? acts.

The river Göta Älv reaches between Vänern and Gothenburg and is the main raw water source for Gothenburg that supplies about 700 000 people with water. To protect and maintain a high water quality, continuously samples and water analyses are made throughout the river. In 1998 a protection area was founded between surte and Lärjeholm where the raw water intake is. This was made to increase the awareness of the importance to protect the water. However, there is a lot of contribution of untreated stormwater to Göta Älv within the protection area.Göteborg Water and Sewage Works commissioned this thesis where two areas, Tagene industrial area and Kärra residential area, with untreated stormwater outlets within the protection area are studied.

Business Process Modelling Notation (BPMN) is a way to graphically draw a diagram of a business process. A BPMN diagram consists of several so-called flow objects. These are interconnected in the graph through sequence  flows. BPMN models are merely graphical representations of business process and there is a need to simulate these diagrams for different purposes. The simulation that now is available for BPMN is that the model is evaluated by checking if it is correct.