Flooding events are no longer rare, floods occur all over the world. Accordingly, it is vital for the society and different authorities to work with flood mapping. To meet the goal of Uppsala kommun to map the risks of floods in Uppsala län, a map of the different areas around Funboån which are inside the area of risk for flooding have been developed.In the work, cross sections and the water flow have been measured. Moreover, an echo-sounding have been carried out in Funboån to map the bottom topography. From the bottom map and laser scanned data covering the study area, a terrain model was created.

During the nineties, ecological handling of urban storm water became very popular in Sweden. Together with Chalmers University of Technology and two Swedish communities, DHI Water and Environment has been doing research of storm water ponds and constructed wetlands. This thesis work is a part of that research project. The work has been applied at the Bäckaslöv storm water treatment plant in Växjö, Sweden. The plant consists of one storm water pond and a downstream constructed wetland.

Severe floods caused by heavy autumn rains in year 2000 raised the question whether measures to reduce the damage from high water levels, in the area surrounding lake Glafsfjorden and along the river Byälven down to lake Vänern, are possible. One option is to reduce flow resistance along the river and thereby lower the maximum water level a given inflow would cause. Good knowledge of hydraulic and hydrological conditions is necessary in order to estimate the effect of such flow-reducing measures. In order to quantify such effect a 1-dimensional hydraulic flow model has been set up for the river Byälven using the software package MIKE 11. The model is more detailed, especially concerning topography and bathymetry, than earlier models used for studies of the river.

Skyfall kan leda till stora konsekvenser för samhället, framförallt i en stad då den urbana miljön är känslig för extrema händelser. Västerås stad har tidigare drabbats av skyfall där följderna har varit kostsamma. Den senaste forskningen pekar på att intensiva regnhändelser kommer bli allt mer vanligt förekommande, därför är det intressant att undersöka vilka konsekvenser dessa regn kan leda till.En analys har gjorts med utgångspunkt från SMHI:s lågpunktskartering över Västerås. Utifrån denna kartering undersöktes vilka förorenade områden, bostadsområden, exploateringsområden, infrastruktur, vårdcentraler, skolor, nätstationer och prioriterade pumpar som ligger i lågpunktsområden. Denna jämförelse har gjorts i ArcGIS.

Storm water management has become a more important matter as urban areas are expanding and natural areas are being exploited. As nature landscapes are being converted into hard surface areas storm water flow is affected both in terms of velocity and size. A flow increase can easily result in a flooding if the dimensions of the pipeline system are inadequate. Considering predicted upcoming climate changes, flooding?s may become more common in urban areas in the future.

  iiiAbstract?We are living in a time of project. Everything becomes project. All development, all efficient,all changes are running as project?.

Background: Today there are high claims on organizations to show a positive economic view. To satisfy the demands and expectations from interested parties it is very important to carefully plan the companies tied up capital and cash flows. Purpose: The purpose with the thesis is to describe what actions organizations take to resolve the conflict between showing a positive cash flow and the need to tie up capital.The purpose is also to explain the different factors that must be considered when making decisions regarding cash flow and capital tied up. Method: A qualitative study of the actions and factors wich must be considered when decisions in swedish construction companies are made regarding cash flow and capital tied up. Results: A model of the factors and actions that affect cash flow and capital tied up in projects.

Flow measurement is one of the greatest challenges in order to calculate efficiency in hydropower. Most hydropower plants in Sweden use differential pressure methods for flow measurement. These methods are dependent on constant conditions in the waterways. A change in these conditions, like turbine improvements, prevents differential pressure methods to verify efficiency improvements. Since efficiency improvements can?t be verified by one measurement system, another method, which isn?t affected by changing conditions, can be used.

Uppsatsen behandlar ämnet genus och genusframställningen i barnböcker nu, och för 50 år sedan. För att komma fram till ett resultat har två analysmetoder använts, Nikolajevas mimetiska metod samt en semiotisk bildanalysmetod. Resultatet visar att det skett en förändring av genusframställandet i barnböcker de senaste femtio åren och att den största förändringen skedde i mitten på 60-talet..

The aim of this essay was to study the nitrogen flow in two willowplantations, at different locations in the south of Sweden, that wereirrigated with sewage. The study was also performed to compare thedifferences in nitrogen flows between two years, 1998 and 1999. The studywas made in three parts. First, the denitrification activity was measuredusing the acetylen inhibition method. Second the nitrogen flow, as well asthe water- and heat flows, were modeled through the SOIL-SOILN-modelThird; the nitrogen flow was calculated to compare with the results fromthe model.The results from the measurements were then compared with the resultsfrom the SOILN-simulations to detect differences in the denitrificationrate.

A well, situated on Listerlandet in the western part of Blekinge in Sweden, has a very high content of nitrate. Water with a too high content of nitrate is hazardous to human health, in particular to small children. The area surrounding the well is mostly drained agricultural land with some larger farms for chicken and mink. The well takes its water from the bedrock and is deeper than most other wells affected by nitrate. The bedrock in the area is dominated by limestone with a relatively high flow of water.This thesis was performed in order to find the source of the nitrate.

The ISO standard ISO/IEC 17799/SS-627799-2 is a guidance for organizations to realize their information security goals. In spite of this standard, studies show flaws regarding information security in organizations. In particular flaws regarding overall view, knowledge and clear roles and responsibilities have been observed. The ISIT (Information Security Integrated Three level) model and its guidelines, developed in this thesis, help organizations to identify the required processes and procedures as well as the logical process flow. The thesis is based on theoretical studies and a case study within a multinational company.

The ISO standard ISO/IEC 17799/SS-627799-2 is a guidance for organizations to realize their information security goals. In spite of this standard, studies show flaws regarding information security in organizations. In particular flaws regarding overall view, knowledge and clear roles and responsibilities have been observed. The ISIT (Information Security Integrated Three level) model and its guidelines, developed in this thesis, help organizations to identify the required processes and procedures as well as the logical process flow. The thesis is based on theoretical studies and a case study within a multinational company.

Mathematical models possible to simulate are of great importance in order to make successful projects in the aircraft manufacturing industry. An aircraft fuel system is very complex, containing pipes, tanks, orifices, valves and pumps. The principal of this thesis is using the tool Easy5, which no longer is considered reliable enough in terms of development and support. This thesis tries to evaluate the Modelica language as a possible alternative to Easy5. To make this evaluation, the components concerned in the fuel library in Easy5 are implemented to the Modelica language.

This master thesis was conducted during the spring of 2014 at Atlas Copco Rock Drills AB in Örebro. The purpose of the thesis was to develop a simulation model of the rotation system for a hydraulic rock drill. In the future, the model will be used to investigate the phenomena called ?jerky rotation?. In order to validate the simulation model a test bench was designed and tests were made.