This degree project was conducted in collaboration with Gremo AB located in Ätran.The aim of the project was to develop a solution to secure quality and to help assemblingthe locknut holding the vertical hinge on the harvesters and foresters from Gremo.At this time the nut is assembled manually by the aid of an overhead crane. The nut istightened differently from time to time, and there was no specified torque to which it istightened. Another present problem was the locking washer which sometimes getsdamaged during assembly, when this happens the procedure has to be started over fromthe beginning. The current assembly procedure is very time consuming and lengthy forthe employees.Our task was to design a machine that could tighten the nut to a specified torque with amargin of error of ± 3%. The assembly procedure will be held simple and the timerequired at a minimum.The project started by developing several principle solutions, the one solution that bestmatched our specifications were developed to a primary solution.Today we have started manufacturing and assembling our prototype.

This paper evaluates the prospects for utilizing aquaculture effluents as a nutrient source in organic hydroponic, as is the case in aquaponics. The development of organic hydroponics is dependent on replacing synthetic fertilizers with organically derived nutrients, such as those found in aquaculture effluents. Also, in hydroponic cultivation the establishment of a plant pathogen suppressive micro flora is part of the plant protection strategy. Therefore, both nutritional and microbial qualities of aquaculture water and organic hydroponic nutri-ent solution were analyzed and compared. Results showed both aquaculture water and or-ganic hydroponic solution to be deficient in a number of essential elements, although or-ganic hydroponic solution was closer to recommendations.

AbstractThe assignment were assigned by Camatec Industriteknik AB. Camatec is a Karlstadlocated consulting company, they make everything from pilot studies to complete projects in mechanical design and calculation. They even have their own patented product, Camcoil. It is a winder for steel strips and is used for example with hardening of the steel strip. The assignment has been to solve the problems encountered by some customers within this product.

We performed our thesis at SCA Hygiene Products in Falkenberg. Our task has been to present a suggestion for a solution of the packing of giveaways that the company uses.In the current situation the work is performed manually, and the company wants to automate the process. In the following report, we present the different solutions that we have developed in our definite model. It includes a picking solution, a shaking table and trays. The product choices we have made are based on existing solutions.To help, we have used Fredy Olsson's books in principle and primary structure.

Akademiska hus is a real estate company that specializes in providing Swedish universities with housing facilities for educational and research purposes. The company strives to reduce its use of energy by 40% between the years 2000 and 2025. The aim of this thesis is to determine which measures can be taken to reduce the need of purchased energy in a building that is used by theSwedishUniversityof Agricultural Sciences inUppsala.In order to determine the results of various changes to the building envelope and ventilation system, the building was modelled in the computer simulation program VIP-Energy. Other proposed changes to make the use of energy more efficient concerned water use and lighting. The need of purchased energy can also be reduced by producing electricity or heat on site, using solar energy.Results show that economically viable measures include upgrading windows and faucets, adjusting control systems for ventilation and lighting, and installing roof mounted solar panels for power production.

Jönköping Energi AB (JEAB) is a local energy supplier for the county of Jönköping. JEAB also maintain the local Metropolitan Area Network (MAN). They have recently installed GPON in a portion of their network and have connected it to the MAN via an Extreme switch.However JEAB would prefer to use Cisco equipment instead of Extreme since the MAN comprises of Cisco hardware. They require a solution to connect GPON to the MAN with a recently purchased line card (Cisco 7600 ES20) which can be installed in a Cisco 6500 Catalyst switch. There is also a possible solution with an Alcatel-Lucent 7450 ESS-1 switch.

The graduation essay has been carried out in co-operation with Kalmar Industries in Lidhult, Sweden. The purpose of our essay was to develop a complete construction solution on a hoist that could lift a laying wheel, lift it up and then turn it 90 degrees. After that the wheel shall be placed in a special holder.The background of the essay is a record of reports of damage wheels when they been incorrect lifted with a forklift. The hoist shall be used together with the same forklifts that manage the wheels today. Together with our instructor at Kalmar Industries we developed a requirement specification and from that we got free hands.However this was not the main task from the beginning, then a simular hoist should be develop but used directly in the assembly workshop without using a forklift.We started to find principle solutions that later was evaluated against the requirement specification.

One of today problem at IVT industries would be assembly of insulation on water cisterns. The element of assembly insulation on the cistern gets too elevated; hence one has to climb onto the stand the cistern is assembly on. This will increase the risk of work related injuries when there is a risk of falling down. It?s also rather strenuous on shoulders due to work with your arms high above your head.

This report investigates a possible solution to the problem with adapting wave powerplants to work in countries with tidal water. The wire connecting the buoy at the surface with the generator at the bottom needs to adjust to the varying water depth. Our solution to this problem is to attach the wire to a jack which is then placed inside the buoy. The jack is then powered by an electric engine. The report discuss what forces the buoy will be exposed to and then the structural integrity of the design is evaluated through simulations.

This study is based on the child welfare agency and social welfare board definition in Växjö City about the people who were defined as feebleminded and which solution they choose for this ?social problem?, with focus if they used sterilization as a solution to this ?problem? during the years 1934-1941. The individuals who were regarded as feebleminded were alcoholics, unemployed, people who were feeble in their mind, people who had mental diseases, people who were vagrants and poor people. According to earlier research these people were categorized in a subclass and their behavior were not regarded as ordinary like a human who had a healthy mind, according to that period believes.The boards in Växjö defined the feebleminded people with mentally deficient minds, mental retardation, poverty and in some cases disturbed self-activity. However the most common definition of the feebleminded was mentally deficient minds and mental retardation.

The number of elderly continues to increase in Sweden which puts pressure on the elderly care. Aproposed solution is to increase the use of information and communication technologies (ICT) inhome care to both streamline care and enable older people to manage on their own to a greaterextent. So far Västerås is the only municipality that has made a decision on an ICT solution, whichthey have chosen to call ?eHemtjänst? (eHomecare). The purpose of this paper was to investigatethe specific prerequisites and requirements for Gothenburg city regarding the potentialimplementation of eHemtjänst.

This report examines the prerequisites for LEDs to replace other technologies indifferent applications. How does the different technologies for light generationwork and what are the advantages and disadvantages? The various technologieslimitations and characteristics provides the opportunities for the LEDs.This report describes a test-construction built to examine what practical arrangementscan be built with modern light emitting diodes, in order to showsome of the possibilities. The construction consists of three different applications,a high power lamp based on cold white LEDs, one based on warm whiteLEDs for the evaluation of the light characteristics and a RGB-LED based lampable to mix any colors quickly and seamlessly. The test construction also containsthe essential peripherals including control-electronics, optics and a custombuilt watercooling solution.The potential for LEDs is huge but it is complicated to build LED based applicationsdue to the limitations which mainly includes the electronics and theneccesary cooling.

Internet grows, so it?s cracking, soon will all IPv4 addresses be allocated and a solution is urgently needed. The new protocol, IPv6 is the solution to this problem. With a size of 128 bits against IPv4s 32 bits gives IPv6 a huge amount of addresses to distribute. The security addition that may be added manually in IPv4 is the standard with the new protocol.

AbstractThe assignment were assigned by Camatec Industriteknik AB. Camatec is a Karlstadlocated consulting company, they make everything from pilot studies to complete projects in mechanical design and calculation. They even have their own patented product, Camcoil. It is a winder for steel strips and is used for example with hardening of the steel strip. The assignment has been to solve the problems encountered by some customers within this product.

AbstractDelta Terminal owns an outdated industrial building which they now rent out to businesses. This property currently has a high energy con-sumption and therfore it is desirable to improve the efficiency. In ordet to reduce the energy consumption within the industrial building enve-lope, the heating systems and lighting are being investegated. A good building envelope emits less heat and thus reduces the energy consump-tion. An energy audit is a tool used to determine the energy loss.