Deposits can be formed in the paper machine due to sticky materials from wood and recycled paper. These deposits get stuck on process equipment and cause the product quality to deteriorate and the efficiency of the paper machine is reduced. The purpose of this thesis is to increase the understanding about deposits among machine operators, and to suggest methods that can be used to reduce the amount of deposits formed in Bravikens paper machines.To fulfill the purpose of the thesis a pre-study, a literature review and interviews with machine operators and production staff, were carried out. These methods led to the planning and creation of an education about deposits for machine operators.The education about deposits for machine operators consisted of an interactive lecture to introduce the subject of deposits and a subsequent discussion. This approach was chosen to give the machine operators the opportunity to discuss their work situation on the paper machines related to their new knowledge about deposits.

There is a need for productivities data and data for different types of machines for comminution of logging residues. The lack of data and studies on GROT comminution makes it difficult to evaluate different chains for handling of residue fuels and make system analyses.Four types of machines with three different working principles were compared at six studies during winter conditions. Three to eleven trials during 9.5 to 30.7 minutes were made on each machine. Samples from the produced material at each study were sieved to determine the size distribution of the comminuted material. Samples were also taken from the studies for determination of moisture content.

The comprehensive goal in this study was to examine important factors in an introduction of a new machine team. The aim was to identify what elements should be part of an introduction program for new machine team. The examination was done together with Stora Enso Skog. A new machine team and their supervisors where analyzed during a six month period. The evaluation was done with open interviews of the team members and their supervisors. The main question was what should be included in an introduction program to develop a successful machine team as effective as possible? Interviews of the new team and analyses gave good indications how the procedure should be done.

This report is about the issue with decreasing production rate mainly caused by failuresrelated to the multiswitch. The multiswitch is a machine at Gefleortens Mejeriföreningwhich has the function of distributing milk cartons from one incoming track into fiveoutgoing tracks. Milk cartons who gets stuck and there by causes the production to stop,is the mainly problem with this constructionThe purpose with this report is to understand the causing factors and make suggestions which can help solving these factors. By analyzing the machine during production, having contact with different suppliers, searching internet for information, 3d-cad drawings and the complementary with personal experiences, this machine has  been evaluated and as a result of this new problem has come to be known.The discovered problems was analyzed and resulted in new suggestions for alternative options. Later the most functional results was chosen and put as a suggestion for the new model.A new machine built with the suggestions from this report assures to be well adapted to the environment at Gefleortens Mejeriföreing and the problems it causes..

Mek Stans 07 is a machine developed for Tetra Pak in Lund as a 10p candidate theses project at Halmstad University. The commission behind the project involved development of a machine that punches holes in packages for the inspection division at Tetra Pak. The task for the machine was to facilitate the process of making openings for testing in the company?s other equipment. Researches on different methods of cutting, types of automatization and possible designs were made. To implement the project a design and construction from the base where chosen.

Abstract The main aim for this research is to come to an understanding for why young people choose to apply for the machine program when the time comes for the students to make their choice of upper secondary school program. The second aim for this research is to try and come to an understanding on how to make the machine program more interesting for future students to apply to.  The method of this research is quality method with the usage of interviews. With a total of six students in the first grade going on a school in the middle part of the country I tried to get answers to my questions. There are many things that affect students when they are facing what gymnasium program to choose and a very common answer by students in this study is that friends and work after school are some of the reasons for why students choose, for example, the machine program. The study also shows that parents has less influence of the students choice of gymnasium program and in fact, all students in this study made the choice to pick the machine program as their gymnasium program, but not always the machine program as their first choice. With the comparison of similar studies with my study the results are often in line with what other scientist have come up with.

This is a study in the field of Music Information Retrieval (MIR) concerning classification of musicgenre. The study uses a music listening experiment and machine learning methods to determinewhether or not the drum sounds from different songs contain sufficient information to classifygenre.MIR methods are used to extract data from the audio signals. The data is used together with theclassification results of the listening experiment to train different machine learning algorithms toclassify the songs in different genres.The results indicate that using only drum sounds for genre classifications works well, both forlisteners and for machine learning methods..

As a student during my studies, I have been told about entrepreneurs who have red numbers in their financial statements, and there is a forest machine operator shortage in Sweden. The basic idea of this thesis was to examine the underlying factors that may have caused the problems described above. The aim of this thesis was to investigate the factors that create stress and job satisfaction as a forest machine operator. The study was performed as a comparison between forest companies own harvesting teams and entrepreneur teams to investigate if there are any differences in stress and job satisfaction between the two different types of team. The study was conducted in collaboration with SCA Skog. The material for this study was collected by doing interviews with SCA's harvesting teams. A total of 27 forest machine operators were interviewed, divided into a total of 10 separate harvesting teams. It was very similar between the different type of teams, which situations the operators experienced stress.

Uppsatsens titel: Leverantörens varumärkesstrategi ? En studie om hur konsumenters beteende kan påverka en leverantörs varumärkesstrategi gällande private label och national brandsKurs: Examensarbete, Civilekonomexamen, Marknadsföring, 30hp (4FE62E)Lärosäte: Ekonomihögskolan vid Linnéuniversitetet, KalmarFörfattare: Amanda Andersson och Rebecca DanielssonHandledare: Christine TidåsenExaminator: Bertil HulténDatum: 2014-05-26Nyckelord: Private Label, National Brands, Varumärkesstrategi, Leverantör, Konsumentbeteende, Attitydslojalitet, Beteendelojalitet Bakgrund: Varumärkesutbudet på hyllorna i dagligvaruhandeln har förändrats. Denna uppsats fokuserar på hur en konsuments beteende gällande varumärkena private label och national brands ser ut. Vidare utgår uppsatsen från hur konsumentens beteende kan påverka leverantörens varumärkesstrategi gällande private label och national brands. Syfte: Examensarbetets syfte är att beskriva hur konsumenters köpbeteende och tankar kan påverka en leverantörs varumärkesstrategi gällande private label och national brands. Vidare avser uppsatsens författare generera slutsatser gällande hur leverantörer kan hantera sin varumärkesstrategi.

Titel: Ekologiskt som ekologiskt? ? En kvantitativ studie av eko-label effekten ur de tre hållbarhetsaspekterna. Nivå: C-uppsats i ämnet företagsekonomi: Examensarbete i företagsekonomi C 15hpFörfattare: Malin Damberg Larsson och Anna ÖstlundHandledare: Dr. Jonas KågströmDatum: 2015 MAJSyfte: Syftet med studien är att mäta om magnituden på eko-label effekten skiljer sig utifrån vilken del av de tre hållbarhetsaspekterna (miljö, social, ekonomisk) produkten fokuserar på. Genom vår studie vill vi bidra med en inblick i hur eko-label effekten påverkar synen på ekologiska produkter utifrån de olika aspekterna.Metod: I studien genomfördes ett experiment med 117 deltagare som var uppdelade i tre olika grupper.

There are many eco-brands on food products. It can be confusing for the consumer to know which one to trust or choose and since July 2012, there is an EU law and a mandatory EU organic label that must be displayed on all food products marketed as organic, eco or bio.Organic brands from a consumer perspective have previously been studied in England. This is a similar study in the form of focus groups, to explore and examine how consumers perceive and trust organic brand or labels in Sweden. It also explores which knowledge consumers have regarding why a product has an organic brand and what it means.The study shows that consumers perceive organic brands by brand recognition rather than knowledge regarding what each label means. It also shows that the consumer is confused by and skeptical to the wide range of markings and symbols on organic food products.

Forest ebeaver is, equipped as a bio-energy harvester, approximately four and a half meter long and weigh just over two tons. The main purpose of this report is to find out whether a small machine like Forest ebeaver can be profitable used in early thinning. To find this out a study has been made using the machine to thin in a young pine stand..

The project was carried out with SwedSafe AB, engaged in hearing and manufacture of earplugs. Since the company is a world leader in the sale of these products, it is important that they keep a higher level of quality of these products.Production of earplugs is currently a automated manufacturing process that is divided into four conveyor belts and one of the conveyor belts is what will be affected in the project. The belt affected during this process is exposed to various elements such as filling, closing, fermentation and extraction of products. Because the belt gets dirty, degraded products and the work environment is affected. To increase the quality of products and improve the working environment requires an automatic cleaning process, which collects dirt from the belt.The aim of the project is to design a machine that prevents the belt from becoming dirty, preserve molds clean and improve the working environment without disrupting production.

Reporting harvested and forwarded volumes are important for the forest industry as it provides information of the size of the stock and facilitates logistics. Figures from Holmen Skog show low reporting frequency. The purpose of this study is to investigate the reason and find suggestions for improvement. A total of 17 machine operators were interviewed using a questionnaire combined with open questions. The results show that the majority of the machine operators find it simple to use the reporting system, although, some of them reports that it doesn?t always work as supposed to.

Purpose: To contribute to the understanding of the relationship between private labels and the retailer brand in grocery retailing. Methodology: We use structured interviews as a cross-sectional method for quantitative data collection. The existence of the relationship is tested through correlation analysis and regression analysis. Theoretical perspective: Perceived quality of private labels and of retailers are the main theoretical concepts for this thesis. Additionally, we introduce the concept of loyalty to show the benefits of a positive consumer image.