This paper is finishing part of the two-year master programme in Industrial Engineering and Management.Initially there was an inquiry of studying the queue-times that Fläkt Woods uses when they break down internal working orders. These times were assumed to be too generalised and does not apply to the actual value of the queue-times which generates incorrect data and delivery delays. During the work of this paper it has been established that it is not the queue-times that is the biggest problem. The problem is the shop floor control and the lack of manufacturing the right products at the right time. Therefore an analysis of the production planning process was made to bring forward the real problems.

Senaste åren har det uppdagats flertalet bolagsskandaler världen över, där de i vissa fall kan relateras till en bristande intern kontroll. Detta har föranlett att marknaden och aktieägarna tappat förtroendet för den finansiella rapporteringen. Åtgärder genom en tydligare lagstiftning har vidtagits för revisionsarbete i syfte att säkerställa företagens interna kontroll och därmed öka förtroendet hos intressenterna. Regelverken, Sarbanes-Oxley Act, The Combined Code och Svensk kod för bolagsstyrning tangerar alla området bolagsstyrning och därigenom även det interna kontrollsystemet. De nämnda regelverken har en gemensam nämnare, det vill säga införlivandet av revisionsutskott i organisationerna för att kvalitetssäkra den interna kontrollen.

Purpose: The purpose of this study is to increase the understanding of how a bank?s features and internal factors have affected its choice of method in calculating the capital requirement.Theoretical and Empirical Method: The research strategy of this study has been of a qualitative nature with a deductive approach. The choice of method was depth interviews with respondents from a targeted sample of Swedish banks. These respondents were chosen based on the knowledge they possess as key employees in the capital requirement process and their involvement in choosing their banks? method for calculating the capital requirement.

This essay is about the development process I have undergone during my experience-based preschool teacher education. I write about my internal process, about how I as a childcare worker go from assertiveness and believing in myself into fighting doubts, thoughts and feelings as a preschool teacher. The purpose with this essay is to make the difficulties with managing new knowledge and practicing it in real life visible, and at the same time overcome your uncertainty in a new professional role. The essay is based on two stories from my professional life where I, in the first one portray my actions and behavior as a childcare worker and in the second one as a preschool teacher. Based on my stories I try to answer questions as what does the individual learning process look like when going from one professional role to another in the same profession? What impact does theoretical knowledge have on practical knowledge?I have used reflection and writing as methods for my paper.

The issue about how Scania shall perform HVAC tests in the climatic wind tunnel CD7, which Scania is about to complete by year 2013, has resulted in four test methods for truck HVAC and also a test method structure. The test methods have been chosen to focus on sun, snow and rain simulations. These are adapted and developed according to what should be tested and to what can be tested in CD7, which has been the object. With CD7 different climates can be simulated in a controlled environment for complete truck level, from desert with high sun load to arctic cold and snow.The test methods represents a basis to start from, for designers and test engineers which make the testing more repetitive as well as time eventually can be saved. Before the test methods can be applied they must be verified as they are based on theoretical and empirical assumptions.

SAMMANFATTNING Uppskattningsvis transporteras 171 miljoner grisar inom EU varje år, varav ca 3,5 miljoner i Sverige. Grisarna kommer, under hela förloppet från förflyttningen från box i stallet till bedövningen i slakteriet, att utsättas för stressande moment. Orsakerna är bland annat omgrupperingar, nya miljöer, vibrationer i bilen samt, speciellt under sommaren, värmestress. Temperaturen i djurtransportbilen är en nyckelfaktor som dessutom kan förstärka effekten av andra stressorer. Lastning i höga temperaturer ökar risken för värmestress. Värmestress innebär att djuren får allt svårare att avge sin värme. Även den relativa luftfuktigheten har betydelse, framförallt vid temperaturer över 30°C. Det är ventilationen i transportbilen som ska transportera bort värme och fukt från bilen.

The purpose of this study was to evaluate the different substrates that enter the digestion on Sundet wastewater treatment plant for production of biogas.This work have done an analysis of data about the biogasproduction from January 2012 to feburari 2013, this showed that the food substrates has a greater gas production than internal sludge.Through laboratory test the VS, TS and COD values for all the substrates used in the biogas production could be determinded. But the COD-method was less optimal for analysis of fat and food, therefore it optimized the method for fat but due to time constraints, this could not be done on the food substrates..

The thesis aims at describing how culture is produced and reproduced at IF Friskis&Svettis Stockholm, a Swedish non-profit training association. The authors claim that organizational identity plays a major part in determining ways of action within the organization. Selection processes, programming and internal recruitment and sensemaking are essential issues of the cultural production and reproduction..

The economical and judicial cooperation that EU constitutes results in that there is an increasing amount of international disputes arising. These international disputes in turn result in questions concerning private international law. The principle of mutual trust is not only an important principle in the entire judicial cooperation but especially important in the area of private international law. The principle means that the member states have to trust each other and the different legal systems. The aim of the principle is to ensure a well functioning internal market that is permeated by free circulation and freedom of establishment.

The online gambling market has during recent years experienced high growthmostly due to the popularity of online poker. Today other games such as casinoare growing in popularity and more customers are turning to the onlinegambling market instead of the regular gambling market. As with all growthmarkets more and more companies establishes on the online gambling marketeven though high external risk factors such as regulations and nationalbans. Companies such as Betsson connected to the online gambling marketsuch are experiencing high growth which has made them interesting objectsfor investing.This bachelor thesis intends to study competitive advantages, investigate possibilitiesto keep and increase market share, and use this information combinedwith a financial analysis. The purpose of the thesis is to describe andanalyze the future of Betsson AB from the perspective of an investor.

In this project the task has been to develop a product that will facilitate an operation for personnel working in a sterilization center. The operation is to steer the front of a loading trolley into the chamber of an autoclave, a so-called docking. The moment is complicated because the margins to deviate from ideal docking position and still succeed, is very small.The principal Getinge's desire was that the product could be retrofitted at the customers on their existing systems. One of the demands was that the product should fit two types of trolleys, one with a adjustable working height and one with a fixed working height. Getinge is supposed to purchase the system from a subcontractor who shall manufacture it and the requirement from Getinge is that the cost of purchase mustn't exceed SEK 500Initially principles, solving the problem was developed.

Unlike the manufacturing industry, the construction industry is always in motion. Each new construction project brings new opportunities, and it requires a new plan, new organisation, and new suppliers. All construction projects are very different from each other and in terms of a logistical perspective, this is very weak as it makes it difficult to get a flow in the production and to make flawless routines. The way the external and internal logistics are managed, can effect the final product in the time taken to produce it, the quality of the product and the profit made from it. When internal logistics are handled poorly, it could result in materials not being at the right place at the right time, or information not going through to the right person.

Problem Discussion: Today the banks manage three central products: mutual funds, mortgages and bank accounts. Banks have authority and credibility, the services and the products they offer and sell can sometimes be difficult to understand. Customers are offered a large number of investment options with varying risk profiles. These developments have created an increasing need for knowledge and information among customers. The financial advice that the financial firms provides, remains a very important activity from a customer view.

The purpose of this paper is to analyze and question the government survey 1956:43 Zigenarfrågan based on the theory of internal colonialism. An important question for the study is to elucidate and gain an understanding of the factors that led to Roma inclusion in the compulsory school. This survey of the goverment investigation is necessary because the state management of the Roma had to start the investigation, that led to a number of difficulties for the community. The investigation put also a lot of demands on the roma society. The state wanted at all means to influence and change the group's way of life.

The main goal of this project was to develop some sort of a diverter for pipestransporting waste in a vacuum system. This unit was supposed to be both cheap andeasy to serve/exchange worn out parts. With a limited space to install the pipeexchanger, the challenge was to keep it as compact as possible without constructingbends with to small radius or to sharp angles as this would wear out the system a lotfaster than planned. The system was also supposed to be able to handle clothes andscrubs from hospitals. Having too much sharp edges or angles would tear the clothesapart.