Sammanfattning  Datum:                               2011-01-14 Kurs:                                  Kandidatuppsats i företagsekonomi Lärosäte:                           Mälardalens högskola Akademi:                           Akademin för hållbar samhälls- och teknikutveckling Handledare:                      Lennart Bogg Examinator:                      Cecilia Lindh Författare:                         Wilhelm Moby och Pia Robson Nyckelord:                         Lean Production, implementering, effekter. Titel:                                   Det lutar mot Lean ? en jämförelse av arbetet med- och effekterna av Lean Production på ASSA AB med teoretiska kunskaper inom ämnesområdet.                                           Problemfrågor:                 Hur har ASSA AB gått tillväga för att införa Lean Production och vilka faktorer har varit avgörande?Vilka effekter har införandet av Lean Production givit verksamheten? Syfte:                                 Den här studien ämnar undersöka och sedan jämföra arbetet med- och effekterna av Lean Production hos ASSA AB med teoretiska kunskaper inom ämnesområdet.   Metod:                               Metoden är av kvalitativ karaktär och med hjälp av djupare litteraturstudier och en semi-strukturerad intervju ska studiens syfte uppfyllas. Slutsatser:    Resultatet av den här studien kan sammanfattas med att det som framkommit i den empiriska undersökningen mycket väl överrensstämmer med det som sägs i den teoretiska referensramen. ASSA AB har först infört verktygen 5S och standardiserat arbetssätt, vilket möjliggjort införandet av andra verktyg såsom kanban. Inget av detta hade dock varit möjligt med ett lyckat resultat om inte personalen först blivit utbildade och en leankultur skapats.

There is a common belief that the arts contain knowledge of creativity that can enrich the business world. Similarly, the arts are in need of additional support from the private sector and know-how of business practices. In short, there is a need for mutual understanding. With my background as a dancer paired with my studies at the Stockholm School of Economics I have taken the challenge of bringing the two worlds closer together. By changing a social system, like an organization, it is possible to get a better understanding of it.

Våren 2011 beslutade Röda Korset i Sverige att sluta skicka skänkta kläder som bistånd till katastrofområden. Röda Korset ställdes nu inför frågan vad de ska göra med de skänkta klä-derna för att omvandla dem till en resurs.Uppdraget var att i samarbete med Zäntrumprojektet och Röda Korsets secondhandbutik Ku-pan förädla de skänkta kläderna på ett miljövänligt sätt. Tanken är att Zäntrumprojektet ska sy om de skänkta kläderna till nya produkter som sedan ska säljas i secondhandbutiken Kupan.Syftet med den här uppsatsen är att finna ett sätt att förädla de skänkta kläderna och skapa nya produkter av dem. Vidare ska de skänkta kläderna skapa bättre resurser till Röda Korset som de kan tillgodogöra sig i sitt välgörenhetsarbete. Produkterna ska vara skapade på ett sådant sätt att de avger minsta möjliga avfallsmängd, främjar hållbar utveckling samt är attraktiva för Röda Korsets secondhandbutiks kunder.

Trioplanex International AB is a part of the group Trioplast Industrier AB, which produces packaging materials for the film and hygiene industry. The group is active throughout Europe, where most of the production is located in Sweden, with head office in Smålandsstenar. Operations in Landskrona consist of Trioplanex International AB and Trioplast Landskrona.Semi-finished articles consisting of paper cores, so called bobbins, give rise to a high amount of core waste in any form of core cutting. The objective of the report is to map out all core waste and illustrate the material flow with regard to present layout and equipment.In the beginning of the project an analysis of the current process was carried out with focus on the cutting equipment. A case study in the form of an improvement work took place in order to reduce the causes which had the biggest impact on existing machinery.Improvement proposals were discussed by the author together with supervisor, assigner and other parties involved.

This paper aims to determine what is decisive for localisation of production units when a company engages in offshoring. By performing a case study on Electrolux and comparing the results with theoretical literature we discuss the implications for manufacturing companies in general. To facilitate a structured analysis we have developed a model dividing the localisation decision into five perspectives and four geographical levels. We have found that the determinants of localisation vary depending on the geographical level of the decision process. Since all geographical levels are interconnected, the analysis needed for a decision on all levels simultaneously is very comprehensive.

The Volvo Trucks plant in Umeå is a highy complex manufacturing facility where the same production line handles a variety of different models. This require flexible and agile processes with high quality standards. This thesis studies the flow of material through a production line and how Volvo can use their existing manufacturing monitoring system to optimize the flow of materials.The goal with the thesis is to identify eventual problems with the flow of materials and to deliver a few proposals on how the production line can improve its productivity. The theory of LEAN, Just-In-Time and Supply Chain Management serves as the scientific reference to this project. By analyzing the flow of material, performing interviews and observing the processes a few problems are identified.

The purpose of this study was to examine whether a L2 learner could correct or imitate structures of the language that they could not produce in written production defined by processability theori levels.The Informants had Arabic as their mother tongue. The study showed that the ability of correction developed slower than the capacity for imitation and the ability to written production. The ability of the correction developed by the duration of the stay. The result was a confirmation of theory formation in processability theory. Corrective elicitering could be developed into a useful diagnostic tool in the classroom and thus provide an education that followed a natural learning order according to processability theory by Pienemann.Keywords: processability theori, imitation, correction, written production.

This thesis studies path generation for industrial robots of six degrees of freedom. A path is defined by connection of simple geometrical objects like arcs and straight lines. About each point at which the objects connect, a region, henceforth called a zone, is defined in which deviation from the defined path is permitted. The zone allows the robot to follow the path at a constant speed, but the acceleration needed may vary. Some means of calculating the zone path as to make the acceleration continuous will be presented.

This thesis is divided in to two different parts. The first part includes examination of the measurementsystem of an industrial robot using a resolver sensor. The main focus is on methods for suppressing noise in the angularvelocity signal without increasing timedelay. Five different methods are investigated. Three of these are based on oversampling: burstsamplingmethod, meanvaluemethod and correlationmethod.

Ocean Thermal Energy Conversion, OTEC, is a sustainable energy conversion technology that is not yet commercialized. OTEC is a technology that utilizes the temperature difference in oceans between the warm surface water and the cold water at 1 000 m depth to run a Rankine Cycle. This technology can produce electricity and provide synergies like fresh water, air conditioning and aquaculture. A simulation program for three alternative OTEC systems has been created in order to decide which OTEC system is most profitable; closed, open or hybrid system. In this simulation a production cost analysis is performed in order to investigate and decide which one of the three systems that has the lowest production cost. The production cost analysis also analyzes if the profitability is affected by the size of the facility. After these analyzes, the most profitable of the three different OTEC-systems is expanded by an installation of solar collectors in order to see if the thermal efficiency is improved. The result shows that the most profitable system varies with the size of the facility.

District heating covers most of the residential areas and industries in the twoneighbouring Swedish municipalities Nyköping and Oxelösund. In Nyköping,Vattenfall AB Värme produces heat in a bio-fuelled CHP plant. In Oxelösund,waste heat and use of waste gases from the steel production at SSABOxelösund is the basis in the district heating system.This report examines the environmental consequences of a connection betweenthe two district heating systems. A broad system approach is used and the focusis on environmental effects in the system.A system analysis has been performed on the result of simulations of differentheat and electricity production alternatives. The alternatives simulated wereone where Vattenfall Nyköping covers the base load in the joint district heatingsystem and two where the power plant at SSAB Oxelösund supplies the heatbase load.The conclusion in this report is that the consequences of connecting the twodistrict heating systems can be both positive and negative, depending onsystem boundaries and on the environmental focus.

The organic farmland is increasing all the time and the goal is that 15 % of the Swedish farmland will be in organic production in year 2010. The organic production needs new and more effective ways to control weeds, and there is the row harrowing coming as a good complement to the conventional weed harrowing. In this experiment is weed harrowing whit different row spaces and row harrowing with a spacing of 25 cm compared. Then are the weed picked and the weight taken of them. The yield is compared in the 7 different ways of treatment. The results is not showing any significant differences in yield even when the row spacing is 25 cm instead of 12,5 cm. Even the spring wheat that is a sensitive crop and has bad tillering is doing well in this experiment. Now with modern technology where the row harrow is controlled by a camera that making the row harrow to follow the rows is it the soil coverage of the crop that is the limit for the speed. With wide machinery is the very good coverage even with a row harrow..

The energy sector of modern time is currently faced with several challenges. These are both production oriented and environmental oriented in nature. The energy of the future is intended to support an increasing demand while at the same time reduce its environmental affection. This stresses a development towards production methods of renewable energy. Among the existing methods, biogas is presented as an attractive alternative.

Arvika Smide is a supplier to the automotive industry with a focus on advanced drop forgings including powertrain and bearings. The great experience and high quality is Arvika Smide?s speciality. Today's competition in the industries puts high demands on the efficiency where each company has a quest for perfection.Arvika Smide has been through the thesis of Karlstad University, called for a situation analysis of aftertreatment whose effectiveness has not been fully desirable. The department includes the production steps blasting, quality control and packaging.The thesis contains the results from the situation analysis and comparisons of the calculations for selected reference period Q4 2009th.

In Sweden we need more lambs during March to June. I decided to calculate on a spring lamb production, because to many of the Swedish lambs go to slaughter in the autumn. I counted on 1000 ewes which have 2000 lambs each year, 200 of these lambs stays on the farm and replace old ewes. The buildings are 3600 square meters. I have counted on two different sorts of buildings, the first one is a shed, the second one is three polytunnel sheephouses.