Sök:

Sökresultat:

3153 Uppsatser om Industrial production - Sida 17 av 211

Framtiden för gamla Habo ullspinneri

This report presents an investigation and a new design of Habo Ullspinneris old industrial premises. It is based on the owners visions and wishes, two questionnaires and also considering of the historical value.Habo Ullspinneri was founded in 1882 by Frans August Johansson and was moved to the location it has today, near Hökån in Habo, three years later. The electricity that the machines in the industry needed was extracted from the small river that is placed under the building. In 1960 there was a fire and the result became the end of the industrial activity that had taken place in the building.There is no steady activity in the building at the moment. It is nowadays temporarily used as an agriculture museum and as a store room.

Banväljare till livsmedelsindustrin

This report is about the issue with decreasing production rate mainly caused by failuresrelated to the multiswitch. The multiswitch is a machine at Gefleortens Mejeriföreningwhich has the function of distributing milk cartons from one incoming track into fiveoutgoing tracks. Milk cartons who gets stuck and there by causes the production to stop,is the mainly problem with this constructionThe purpose with this report is to understand the causing factors and make suggestions which can help solving these factors. By analyzing the machine during production, having contact with different suppliers, searching internet for information, 3d-cad drawings and the complementary with personal experiences, this machine has  been evaluated and as a result of this new problem has come to be known.The discovered problems was analyzed and resulted in new suggestions for alternative options. Later the most functional results was chosen and put as a suggestion for the new model.A new machine built with the suggestions from this report assures to be well adapted to the environment at Gefleortens Mejeriföreing and the problems it causes..

Byggnadslogistiskt arbete för minskat slöseri ? En studie över arbetsfördelningen vid innerväggsmontage på Tuve Bygg AB:s projekt Stapelbädden etapp 3

The production costs have steadily increased within the construction industry during the 21st century. Voices are raised meaning that the construction industry is too unsuccessful in making the production more efficient and to develop it?s way of working. One way to deal with the production costs is to minimise the waste, with waste meaning activities that doesn?t add value to the finished product.

Inventering och riskklassning av förorenade områden i Öna och Östnor :

This work consists of a survey and risk classification of eleven metal industries including foundries, finishers and engineering industries in two industrial areas in Mora. The study follows a method called MIFO (Method of Surveying Contaminated Sites) composed by the Swedish Environmental Protection Agency. In the method assessments of the degree of hazard posed by the pollutants, the level of pollution, the conditions of dispersal, sensitivity and the degree to which the area is worthy to protect are made for each contaminated site (object). The assessment classify the objects into four risk classes in which risk class 1 denotes a very large risk, 2 large risk, 3 moderate risk and risk class 4 little risk. The work of surveying using MIFO is divided into two phases.

Lönsamhetsanalys av tekniker för utökad elproduktion i kraftvärme : Med hänsyn till elprisets variationer

This thesis aims to examine the viability of various techniques for increased electricity generation in CHP plants and the effect of electricity price fluctuations on the profitability.The techniques examined are fuel dryer, pellet production, methane production, combined methane- and pellet production, seasonal heating storages in caverns and pit heat storages and condensing tail. Using Excel and Matlab, the prerequisites for investment costs, revenues and expenses were calculated.What affects the price of electricity is a combination of economic and technological development, energy prices, economic structure, population changes and weather. Different scenarios for the electricity price were therefore examined. In the base case, the electricity price was given by the Nord Pool electricity price statistics of area three in 2011. Thereafter, WiMo was used to design the electricity scenarios for 2030, which was then applied to the data to obtain the viability of various scenarios. The techniques examined were found to give greater profits to the CHP plant by increasing and optimizing the production of electricity.

Ohälsa hos polisen : en explorativ undersökning av riskfaktorer och dess påverkan på mental ohälsa

Earlier psychological research on stress and its complex of problems has identified several factors which have shown a relation with the occurrence of a poorer mental ill-health. In this study some of these factors have been examined in 69 police officers from Stockholm, Lund and Helsingborg. In the study, police officers with high and low self reported ill-health were compared considering trait anxiety, alexithymia and posttraumatic stress symptoms.The results showed that police officers with poorer mental ill health had a significant higher degree of trait anxiety, the dimension of alexithymia difficulty identifying feelings and the PTSD-dimension avoidance and hyperarousal. The results also showed several positive relations among the variables that divided the groups. On account of the last-mentioned the results will above all be discussed in an integrating perspective..

Milk production in dairy cows and goats : a case study in the Nyando district inSouth-Western Kenya

Water is an essential factor for both people and animals, and access to water is therefore of great importance. The water access also largely determines the availability of food for people and feed for animals. The aim of this study was to survey the affect of water access on milk production from dairy animals. The study included nineteen farm visits that were made in the Nyando district in Kenya between February and Mars 2011. Farm visits included interviews with questions about for example number of dairy animals, milk production, water access, feed and water routines.

Dynamate Industrial Services - En spindel i CSR-kontexten : En utvärdering och kartläggning av Dynamate Industrial Services CSR-arbete

Forskningsfrågor:Går det att urskilja CSR-engagemang inom DIS och på vilket sätt arbetar DIS med CSR? Hur påverkas DIS arbete av deras intressenters involvering och engagemang beträffande CSR frågor, vilka utmaningar och möjligheter kan identifieras gällande detta?Syfte:Syftet med studien är att kartlägga och utvärdera hur DIS arbetar med CSR.Metod:Denna studie är en fallstudie med kvalitativ ansats som inriktar sig på en viss organisation, i detta fall DIS. För denna studie utfördes sju semi-strukturerade intervjuer i avseendet att samla in data som mätte upp till och passade in i studiens övergripande syfte.Slutsats:Studiens resultat påvisar att DIS inte innehar någon CSR-strategi men att det är möjligt att urskilja ett utspritt engagemang inom företaget. I nuläget går det att benämna CSR-engagemanget ur ett inaktivt/reaktivt tillvägagångssätt. Intressenter är av väsentlig vikt för DIS i nuläget och att vidare involvera och skapa relationer med ur ett CSR-perspektiv..

Theory of Constraints och Lean Production i High-mix Low-volume fo?retag

Konkurrensen i tillverkningsfo?retag o?kar sta?ndigt och detta medfo?r att det sta?lls ha?rda krav pa? produktkvalitet och fo?rma?gan att leverera produkter i tid. Fo?r att fo?retag ska kunna na? upp till dessa ma?l kra?vs utveckling och sta?ndiga fo?rba?ttringar i takt med den va?xande marknaden. Detta uppna?s pa? olika sa?tt men ett vanligt sa?tt a?r att arbeta med fo?rba?ttringsmetodiker.

Psykolog på vårdcentral : yrkesroll, identitet och profession i jurisdiktionens gränsområde

I denna uppsats undersöks hur psykologens yrkesroll formas och utformas på vårdcentral. Det empiriska materialet utgörs av semistrukturerade intervjuer med fem psykologer på vårdcentral, deras verksamhetschefer samt en yrkesutvecklingskoordinator för psykologer inom primärvården. Med utgångspunkt i grounded theory har resultatet analyserats i termer av primärvårdspsykologi, professionell identitet och professionssociologi. Resultatet lyfter fram psykologernas bild av sin yrkesroll, deras upplevelse av relationer till andra i organisationen och till gränsfrågor. Slutsatsen är att psykologens yrkesroll på vårdcentralen befinner sig i jurisdiktionens gränsområde och innebär ett aktivt identitetsarbete, en komplex och dynamisk process i spänningsfältet mellan professionella identitetsideal och organisatorisk reglering..

Decentraliserat lager - ett steg mot flexibilitet

This study was conducted at Glimek AB, a company that has chosen to decentralize its central storage unit in order to increase production efficiencies. The purpose of the study was to identify the problems in the production cycle that lead to the decision to decentralize the central storage unit, as well as identifying what the decentralization entails. The effects of the decentralization have not been analyzed in the study, and consequently neither financial nor production disadvantages have been considered.Appropriate questions were formulated based on the chosen underlying theories, and were asked to selected individuals with relevant knowledge. The study is based on the information that was gathered from interviews with management as well as staff within the company. In addition, supporting information such as flowcharts, drawings, orders and decision support documents were supplied by the company.

Organisationsklimatets betydelse för anställdas välbefinnande

The main aim of the study was to examine the importance of organizational climate for affective job-related wellbeing. A further aim was to investigate potential differences in employee level in the experience of organizational climate and wellbeing. Another purpose was to see if there was agreement in the view of the organizational climate among the employees. Questionnaires were collected from 44 employees at a chain store. Results showed that Integration, Involvement, Supervisory Support, Training, Welfare, Innovation and Flexibility, Goal Clarity, Efficiency, Effort, Performance Feedback, Pressure to Produce and Quality had a great influence on Enthusiasm but only Pressure to Produce and Welfare correlated with Anxiety.

Att reducera ledtiden i en produktion med hög variation och låg volym - En casestudie på Lab.gruppen

Due to increasing product availability and higher demands on fast deliveries, the competition between companies is growing. To be able to satisfy the customers? requests an efficient logistics system with short throughput time is required. By using tools associated with Lean production companies are able to make great improvements in their manufacturing systems and reduce lead times to satisfy customer demands.There are two classifications associated with manufacturing, high variety and low volume (HVLV) and low volume and high variety (LVHV). The general belief is that the concept of Lean production is difficult to implement in a production environment with high variety and low volume due to the concept being adapted to mass production.

Automatisk räkning med monokrom visionsteknik

The use of vision applications are growing and the demand for integration and connectivity with other industrial automation control devices is increasing. Some businesses that are using vision technology follow US Food and Drugs Administration (FDA) regulation concerning audit trail. This thesis investigates the possibility to use vision technology for counting objects, achieving connectivity and to follow FDAs audit trail regulation. A market survey has been used to select suitable hardware and software to be used in the design of an application that is able to count objects and that uses standard industrial network connection i.e. OPC data access and Microsoft?s .NET components over Ethernet.

Förstudie och utveckling av styrsystem för lådförslutare

Ecolean Development AB are developing and manufacturing filling machines for pasteurized liquid food products. Because of lack of any appropriate supplier of box closer which seals boxes with small flaps, they have decided to start a project to develop a prototype of a box closer. Due to long experience from industrial automation I have been given a chance to develop control system for a box closer. Degree thesis involves electric design in ELPROCAD ic PRO and programming of PLC (programmable logic controller) and HMI (Human Machine Interface). The report describes degree project from the project plan phase via the development phase to the conclusions.

<- Föregående sida 17 Nästa sida ->