Today it is mainly small and medium sized companies that choose to outsource parts of their ITdepartment in order to increase and become great. It is becoming increasingly common forcompanies to take the help of competent suppliers so that they then can focus on their own corebusiness. These companies are taking advantage of modern methods to support systemdevelopment by outsourcing to other countries such as India. Choosing to outsource to othercountries poses new challenges for companies when they meet both cultural and organizationaldifferences. It requires a lot of time and planning and clear communication in order to developand reach the goal.

Together with Attends in Aneby a thesis of 15 ECTS (credits) have been undertaken. The assignment was to develop a new incontinence product for single use. Users of the product value comfort, flexibility, softness, comfort and a discreet product. Users are for individuals with incontinence problems that usually receive the products via prescription. The product must also have an attractive price and good quality from the purchase / originator's perspective.Currently there are two models that Attends supplies, which the project intends to develop, (Slips / Briefs and Pull On's).

The Homogeneous Charge Compression Ignition (HCCI) engine is promising in terms of lowNOx, low particulates and high efficiency. Due to its homogeneous charge, where thecombustion starts almost simultaneously from a number of points in the combustion chamber,only lean mixtures are possible to burn because of the resulting rapid combustion, which is muchfaster than the combustion in an SI-engine or a diesel engine. When richer mixtures are used thecombustion will start earlier and also be more violent.To phase the combustion later and lower the combustion speed, external cooled EGR can beused. The EGR-system used in this thesis uses a divided exhaust channel where one channel andits corresponding valve are used only for transporting EGR back to the intake system.Consequently the EGR-valve is connected to the intake pressure. This system is called Direct-EGR (D-EGR).Engine tests verified that the CA50 indeed is phased later when cooled EGR is used.

The thesis has been made for NCC Teknik in Gothenburg. The NCC Corporation is one of the largest leading companies in Scandinavia within the construction industry. NCC is active throughout the whole construction process, where one part is to carry out soil investigations prior the construction of various buildings, for example residential buildings. NCC Technology wants to visualize the samples taken at the construction sites in 3D for clients, authorities and also internally to show in a simple and understandable way how contamination is spread out in the soil.The thesis includes the area of Limhamns läge in Malmö, previously an industrial area. The area has previously included a concrete factory and the contamination from that factory has lingered in the soil.

SUMMARYThe demands on the public environment are big and in particular on the environment of communication which we spend a lot of time in on our way to work, school etc. The city-approach is a road section that leads from the periphery of the city to the centre of the city, often through boring and meaningless industrial areas that displays the back side of the city to the voyager on the city-approach. The intentions of this thesis in landscape architecture has been to study one of the two city-approaches to the city of Luleå, the close surroundings and contextual position in the city and not at least give suggestions of ways how the city-approach can be changed, clarified and improved. The study of the city-approach has been made by studying literature that concern city-approaches and the architecture of roads in general. Studies of different analysis methods has been made to find appropriate approaches to work with the specific study of the city-approach to Luleå.

Industrial buildings are increasing all over Sweden. Farmers are building new modern facilities and the government chooses to build new halls to invest i youth sports. Glulam is the most common framework but there are limitations because of the transport. Therefore, there is a need to develop new solutions to increase the use of glulam.The maximum torque in the eaves was found in the frame with a roof pitch of 18 degrees and a wingspan of 25 meters. Using hand calculations according to Eurocode and comparison with the computer software StatCon, the maximum torque, shear force and utilization rate is calculated.

This study is made in cooperation with Setragroup AB. Setra is Sweden?s biggest sawmilling company with a turnover of almost 6 billion SEK. 45% of the produced volume goes to the Swedish market where the customers are the DIY-sector and industrial customers. Setra as well as the other Swedish sawmilling companies operate in a very competitive environment.

AbstractBachelor Thesis, School of Economics at Vaxjo universityProgram: Enterprising and Business Development, EBD 362, Spring 2006Authors: Jens Asp, Vivianne Holmer, Carl-Marcus WahlstromExaminer: Stig G JohanssonKeywords: Services, cooperation, collaboration, customer offer, knowledgeTitle: Service firms in collaboration ? A study of the development of small service firms in collaborationNutek presented numbers during year 2005 witched show that the Swedish service sector, for the first time ever, was greater than the industrial sector. The kind of firms that develop most is small service firms without employees. The topic of interest in this bachelor thesis is to study how this kind of firms can develop. There is a great number of strategic options for firms to choose.

This degree project has been carried out by Carolina Rapp and Jenny Tauson, students at Innovation and Design Engineer program at the Faculty of Technology and science at Karlstad University. The project was carried during Spring of 2009 and took 15 weeks of full time work.  Doppelmayr/Garaventa Group is an Austria/Switzerland corporate group and its associated company Doppelmayr Scandinavia lies in Sunne, Sweden. Doppelmayr/Garaventa Group is the world quality and technology leader in ropeway engineering. The degree project goal was to develop a new shaping of a surface lift. There are two kinds of surface lifts, platter and T-bars. The two kinds of surface lifts have some variation in design but only minor differences.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

During its lifetime, a road goes through a number of different stages; pre-study,inquiry of the road, work plan, documenting stage, building stage and operatingstage. The operating stage is the one that takes the longest time and costs themost. Those have a tendency of becoming unnecessarily high because the projectengineers don?t always take the management and maintenance prerequisites intoconditions.To decrease the management and maintenance costs, the Swedish RoadAdministration SouthEast has been in need of a work procedure that makes theroaddesign engineers take the management and maintenance of the road intoconsideration. This shall be achieved by a checklist where the most commondesigns that lead to increased management- and maintenance costs are compiledand listed.Through interviews with project leaders in management, the most commonproblems have been identified, analyzed and summarized under the headlineswinter-road, vegetation, road equipment and road designs.To elucidate the problem from several points of view, interviews wereimplemented with project leaders in investment and roaddesign engineers.

This study is a part of a Swedish research and development project that is about heat-treated wood and is led by the Swedish University of Agricultural Sciences and Luleå University of Technology. Products that are heat-treated already exists on the market, foremost the Finnish brand ThermoWood®, bur the project group want to find out if it would be possible to start a Swedish production with somewhat different applications than what is common today. The heat-treated wood has many attributes that have changed in the heating process. It becomes more biologically durable, it gains stability in form and dimensions and it becomes darker and looses several unwanted extractives such as resin. Disadvantages that can be mentioned are that the wood becomes fragile and the strength properties changes. My main purpose with this study is to look into customer involvement in the early phase of product development. I also want to find out if the customers I interview think that the product is worth working with, which means start a Swedish production.

Bioethanol is one alternative energy fuel that can be produced from different types of biomass. Second generation bioethanol comes from fermentation of lignocellulosic material and can be seen as a more environmental friendly alternative as e.g. forest residues and agricultural by-products are used. To be able to use lignocellulosic biomass in ethanol production, it has to be subjected to different treatments first. In this study, aspen sawdust was used as lignocellulosic material.

The Telecom industry is facing a paradigm shift, where the industry is converging with Internet technologies and the market is becoming more sophisticated. This results in more demanding customers, and the need for offering more content and services with a focus on usability for the end-users. The operators are starting to loose both their strong position and revenue in the Telecom industry, due to new technology and the fact that other actors are starting to enter the market, offering new content and services. In the end, the operators have two choices, to become bit-pipe providers, and only focusing on network management, or keeping the control over their networks. The latter would mean that they block other actors who are taking parts of their revenue, e.g.

Sectra Mameas is a medical technology company in an expansive phase that is planning to increase its volume capacity with 50 % in the beginning of 2009. This to be able to deliver the increased number of systems that the customers request. To be able to produce more units the takt time of the assembly line needs to be shortened. This could only be done by identifying and solving recurring problems. To be able to find the problems, create a common knowledge of which these are and eliminate them the production department of Sectra Mamea needs to visualize certainKey Performance Indicators (KPI) in the organization.