Non-contact anterior cruciate ligament (ACL) injuries is a serius and traumatic injury to the knee that is common in female soccer players and often force the player to quit or lower the level of activity because of lost stability in the knee or from fear to suffer  a new injury. Female soccerplayers have a higher risk than their male counterparts to get an ACL rupture and especially adolescent females have a high risk. The most common causes to a non-contact ACL rupture is side-cutting manuvers and landing after jumping. Every other player with an ACL rupture develops osteoarthritis within 10-15 years from the time of injuryResults: The higher risk for females to incur a ACL rupture is due to smaller intercondylar notch, they?re in the follicular or ovulatory phase of their menstrual cycle, increased knee laxity, dominance in the quadriceps muscles, flexion in hip and valgus movement in the knee.

Today?s environmental discussions have led to more progress in the different transportareas. To ride a bicycle is often one of the most efficient alternative when it comes totransport. An Electric bike is, and makes transportation more efficient than a regularbicycle. Electric bicycles do not affect the environment significantly and allows moreconvenient transportation than ordinary bicycles do.

First-year students at Linköping University have developed a prototype that graphically visualizes a medical record in a new way. The customer of that project was the Department of Biomedical Engineering at Linköping University. They now want a usability evaluation to be performed of the prototype. The prototype is to be used by employees in the public health care and is supposed to be used on a small portable unit with a multi-touch interface. For this reason the prototype will be used as a complement to existing systems when the users work near the patients.

Objective: In recent years there has been an increasing interest within the clinical (medical) science in measuring people?s health. When estimating quality of life, present practise is to use the EQ-5D questionnaire and an index which weighs the different questions. The question is what happens if the individuals estimate there own health, would it differ from the public preferences? The aim is to make a new prediction model based on the opinion of patients and compare it to the present model based on public preferences.Method: A sample of 362 patients with unstable coronary artery disease from the Frisc II trial, valued their quality of life in the acute phase and after 3, 6 and 12 months.

The Swedish industrial society has left several areas with contaminated soil and water which today is of danger for the environment and human health. One of these areas with contaminated soil and water is the region where the former Glava glassworks operated during 1859 to 1939. The main object in this study has been to study the responsibility for the contaminations according to the Environmental Code. The method used is a qualitative content analysis of relevant literature to answer the following questions:What types of contaminations can be found in the area of Glava glasswork and what health issues can these cause?What kind of activity has been conducted in the area that have caused the contaminations in soil and water?According to law, what are the responsibilities for the contaminations in soil and water at Glava glassworks?The contamination in the region has been confirmed to originate from the glasswork due to the environmental engineering survey made in the area in 2009.

BackgroundWorld Alliance for Patient Safety, launched by the WHO, has created a Surgical Safety Checklist. It was first published in 2008 and has been translated and modified in Sweden by Landstingens Ömsesidiga Försäkringsbolag, LÖF. The use of the WHO Surgical Safety Checklist has been shown to reduce the number of complications and deaths related to surgery.AimThe aim of this study is to describe the Theatre Nurse?s participation in in the use of a modified version of the WHO Surgical Safety Checklist intraoperatively in two Theatres in a hospital in the centre of Sweden.MethodThis study has a quantitative descriptive approach. A direct observational study was carried out in two Theatres and the participants were asked a few complementary questions after the observations.

The study is a case study of an activity, called the Oliven, that provides practice for people who are in the Arbetsförmedlingens Job- and development guarantee. The purpose of this study was to examine what it is in the Olivens activities, for people who are part of Phase 2 and 3 of the Job- and development guarantee, which, according to the participants, are working well and what works less well. We wanted to study how the participants perceive their work situation during the time that they participate in the activities. That is to gain knowledge of how the activities for people who are looking for work can be designed so that the participants can, from a salutogenic perspective, create a sense of coherence while they are participating.We have collected the empirical data through participant-observation and semi-structured interviews during two days. The analysis was made using the concepts ofcomprehensibility, manageability and meaningfulness.

Regulations on the exhaust emissions of HD-diesel engines are becoming more and more stringent, and therefore, emission after-treatment systems are commonly used. These systems rely on catalytic conversion of NOx,CO , and HC emissions, and are thus dependant on temperature. At low load of the engine, exhaust temperatures are not sufficient for the after-treatment components. Therefore, means to increase the exhaust temperature while maintaining low emissions and fuel consumption are needed.The focus of this project has been to develop strategies for the lift profiles of exhaust and intake valves in the engine, with the goal to raise exhaust temperature in combination with low emissions and fuel consumption. The strategies have been tested in a single-cylinder research engine equipped with a hydraulic variable valve actuation system.

The report examines the factors which may be a contributing cause to the problems that are present when ferritic stainless steel are eddy current tested in a warm condition. The work is carried out at Fagersta Stainless AB in Fagersta which manufactures stainless steel wire. In the rolling mill there is an eddy current equipment for detection of surface defects on the wire. The ferritic stainless steels cause a noise when testing and this noise complicates the detection of defects.Because of this, a study was made of how the noise related to factors such as steel grade, temperature, size and velocity. By observing the signal and with the possibilities to change the equipment settings the capability to let a signal filter reduce the noise level were evaluated.

Syfte: Vi vill med denna uppsats undersöka hur eventuella utvärderingsprocesser ter sig i samband med konsultprojekt. Vi avser dels att fokusera på den övergripande funktion som en möjlig utvärdering utgör för ett konsultprojekt, dels att belysa konsultens perspektiv på dennaaktivitet. Metod: Vi har vid insamlandet av material använt oss av narrativ metod. Den har möjliggjort att en jämförelse mellan det teoretiska empiriska materialet, utifrån denna jämförelse har vi sedan genomfört analys vilken slutligen utmynnat i slutsatser. Genom fyra öppna respondentintervjuer har vi samlat in material till det empiriska underlaget i denna uppsats.

As a company it is required to work with strategies to minimize costs such as packaging and logistic costs. The increased market of industrial produced wooden buildings results that the time and the cost which the packaging of prefabricated building elements consume, is experienced to be in greater need of development than before and demands a better solution. The aim with this dissertation was to discover how the development of the handling of the packaging can improve the packaging process. The goal was to present improvement proposals for a simplified and thereby a more efficient production in time and cost perspective.The packaging process which includes packaging, handling, storage and transport were studied. Interviews were made with participants from the market for manufacturers of wooden houses and a case study was made at the company A-hus.

As revenues from newspaper advertising plummet and their readers loyalty erode, the need to understand newspapers' changing environment and the actors involved in this change is growing in importance. Evidence is the entire industry is entering into a restructuring phase and that this restructuring is driven by the rapid consumer adaption of internet media.In this thesis I elaborate on "how the Internet is affecting the conditions for value creation in printed newspapers" and "how the Internet is affecting the conditions for other actors involved in the printed newspaper's value creation". These two questions land us in the bigger question of "Does the Internet act as a compliment or a substitute to the printed newspaper ".To answer these questions the printed newspaper is represented as the actor in the middle of content producers, advertisers and consumers. It is in its role as a means of distribution and as a co-ordinating force that we study the value creation of the printed newspaper. The empirical base of this thesis is a qualitative participant observation where the author during a period of time interacted and collected data from the open discussion in blogs by several of the industry's top influentials combined with material from seminars and reports on the current state of media.

Hemp is an old agricultural plant and has been used for hundreds of years for making textiles, ropes and other fibre products. In the middle of the last century the Swedish government prohibited all growing of hemp. Natural fibres were replaced by syntetic fibres instead. Today there is a newly awakened interest for using natural fibres from renewable materials. Growing of industrial hemp for fiber is allowed in Sweden again. I want in my Paper give Swedish growers an insight of which harvesting methods that have been tried in Sweden and how they worked.

This thesis describes the planning and development of a volume meter of pine and spruce cones. The product was designed and developed for Stigsjö Skog och Frö AB in Härnösand. It was developed taking into account a number of requirements set by the supervisor David Zetterlund. The main requirements were that the volume measurement would be fast and give accurate results. These are two requirements that are missing in today's volume measuring method which is very problematic for the company.The plant was visited several times in Härnösand, mainly to discuss the generated concepts with the supervisor and perform tests on the prototype.

This thesis is closely related to the Dynamically Self-Configuring Automotive System(DySCAS) project. DySCAS is a middleware for electronics in an automotive system. Thethesis work has been performed in cooperation with ENEA. Parts of the demonstrationplatform Self configurable High Availability and Policy based platform for Embeddedsystem (SHAPE) developed for the DySCAS project by ENEA have been used in theimplementation phase of this master thesis.The goal of this thesis was to evaluate how the Meteor MW, an offspring of the DySCASmiddleware, should handle QoS and to design a Quality of Service Manager (QoSM) for theMeteor MW that fulfilled hard real-time requirements. The thesis also had the objectiveof analysing and identifying the requirements on such a QoSM from a QoS perspective.Specifically the requirements to guarantee real-time support for applications running onthe MW.