Unlike the manufacturing industry, the construction industry is always in motion. Each new construction project brings new opportunities, and it requires a new plan, new organisation, and new suppliers. All construction projects are very different from each other and in terms of a logistical perspective, this is very weak as it makes it difficult to get a flow in the production and to make flawless routines. The way the external and internal logistics are managed, can effect the final product in the time taken to produce it, the quality of the product and the profit made from it. When internal logistics are handled poorly, it could result in materials not being at the right place at the right time, or information not going through to the right person.

Background: Due to an increasing globalization the competition has increased and this has lead to overcapacity and falling prices on markets today. The subject field logistics has during the last decades been given increasingly significance and has become a way to handle the competition. Theories clearly point outthe importance that a concordance exists between logistics and superior strategy but few, if any, authors give further details about how this adjustment should be made. Purpose: The aim of this thesis is with a case study approach survey if the subject field, which describe the importance that logistical solutions correspond with the superior strategy, is known and implemented in a company. We aim to develop the subject field through our empirical findings.

Meat and fish was the most important food for the Sami people in northern Scandinavia until the beginning of the 20th century. It is not so well known that the Sami people also used a lot of wild plants as food and medicine although that kind of food was relatively common among them until the end of the 19th century. The purpose of this master thesis has been to describe which plants the Sami people used in general and also which plants were the most commonly used, and when and how these plants were harvested. I also wanted to measure the quantities of Angelica archangelica and Rumex acestosa within traditional harvest sites. Furthermore I wanted to find out if the plant use differed among Sami groups geographically.

This study deals with the technical and economic feasibility of replacing the nuclear power plant reactor Ringhals 3 with a biofuel power plant. A technical investigation has been executed to determine which of the systems and components that could be reused and which ones would need to be replaced. The investment costs of the reconstruction have also been estimated. The cost of the electricity production has been calculated as well as the emissions of the new biofuel power plant. Based on the established rate of return, the lowest average spot price of electricity that makes the investment profitable has been calculated.

This study was carried out as a commission from Holmen Skog, district ?Egen skog? in Norrköping. During October 2006 several stands were inventoried by aerial photos from helicopter. The stands were those for which the next action proposed was plant inventory or plant check. The photos were interpreted and the number of stems was calculated.

Executive SummaryThis final thesis has examined the effects of an increased centralization and better coord­in­ation of the distribution logistics at ABB in Västerås. The company is today strongly decent­ralized and there is a minimum of collaboration between the 20 business units. This is why the questions were raised; how could the business units coordinate outbound logistic activities and what effects would that provide. The obj­ect­ive of this final thesis is to provide basic data for a future decision-making which desc­r­ibe these effects.The report has mapped out the factors that are important to ABB in an evaluation of their logistic activities and how the outbound logistics work today. The four factors are cost efficiency, delivery service, environmental impact and logistics capability.

The advantage and the possibility of keeping track of a number of vehicles to make work practice more effective and smooth is today a favorable choice for Visual Units Logistics customers. We?ve been evaluating the software and trying to take it one step further and letting not only the individual user, but maybe, the company as a whole benefit from its advantages. This has been done by using methods like letting ourselves get to know the software, user case studies, workplace studies, interviews and future workshops. This resulted in a prototype introducing a new function designed with all collected data in mind trying to make the software, Visual Units Logistics, even more effective for the every day work practice of the user.

With background in the rapidly growing need to find solutions for sustainable energy production and the increasing interest for wind power, this report was written. With take-off point from the wind power plant Big Glenn, which has been built in the harbour of Gothenburg, a model of the adjacent power grid has been created in Simulink/SimPowerSystems. Parameters for the power grid and its components has been provided by Göteborg Energi Nät, that has also been the supplier of measurement data of produced power, the power need from loads in the vicinity, voltage levels, current values and also the variation of power factor at the wind power plant.The SimPowerSystems model has been used to perform simulations of power flow in the grid. These simulated values have then been compared to the measured values to verify the functionality of the model. Further, the model has been used to perform simulations of a grid fault, which causes a voltage drop.

The Rya power plant in Borås produces district heating, district cooling and electricity. The plant is owned by Borås Energi och Miljö AB and is run by Dalkia Facility Management AB.In order to get the best heat exchange from the district hot water a pair of twin pumps and a turbine circuit pump are used as return pumps. Turbine circuit pumps are used to increase the pressure through the heat exchangers at the power plant. The pumps are in use when the flow is over 2 000 m3 h-1 and during the summer when re-cooling is used to improve the effectivens of the heat boilers.Since the pumps, that are parallel connected, rotating at a fixed rate per minute, the pressure is regulated with regulating valves. This report shows that during the 4,300 hours that the pumps where in use, energy corresponding to 590 MWh was wasted.

With background in the rapidly growing need to find solutions for sustainable energy production and the increasing interest for wind power, this report was written. With take-off point from the wind power plant Big Glenn, which has been built in the harbour of Gothenburg, a model of the adjacent power grid has been created in Simulink/SimPowerSystems. Parameters for the power grid and its components has been provided by Göteborg Energi Nät, that has also been the supplier of measurement data of produced power, the power need from loads in the vicinity, voltage levels, current values and also the variation of power factor at the wind power plant.The SimPowerSystems model has been used to perform simulations of power flow in the grid. These simulated values have then been compared to the measured values to verify the functionality of the model. Further, the model has been used to perform simulations of a grid fault, which causes a voltage drop.

This study has investigated how urban vegetation can be used in a multifunctional way to support ecosystem services in urban environments. Nacka municipality is in the start-up phase of building what is to become Nacka city. This provides a unique possibility to study and analyse what role the vegetation play in making the city a healthy living environment and how it needs to be adapted in order to be resilient against changing climate conditions and how the effects of those changes can be regulated. The study further investigates how airborne pollution, caused by urbanization processes, can be regulated or reduced by vegetation or species selection. Methods used in this study were a combination of qualitative interviews and literature studies, seeking to answer the questions: Which specific ecosystem functions are needed in the urban environment and which aspects will influence the ecosystems ability to deliver the functions in demand? And which plant species have the right mechanisms needed to deliver those functions? These questions have been studied and analysed in a local based context where the local conditions ands site specific needs of Nacka define criteria for plant selection.

Executive SummaryThis final thesis has examined the effects of an increased centralization and better coord­in­ation of the distribution logistics at ABB in Västerås. The company is today strongly decent­ralized and there is a minimum of collaboration between the 20 business units. This is why the questions were raised; how could the business units coordinate outbound logistic activities and what effects would that provide. The obj­ect­ive of this final thesis is to provide basic data for a future decision-making which desc­r­ibe these effects.The report has mapped out the factors that are important to ABB in an evaluation of their logistic activities and how the outbound logistics work today. The four factors are cost efficiency, delivery service, environmental impact and logistics capability.

Msc in Logistics and Transport Management.

The advantage and the possibility of keeping track of a number of vehicles to make work practice more effective and smooth is today a favorable choice for Visual Units Logistics customers. We?ve been evaluating the software and trying to take it one step further and letting not only the individual user, but maybe, the company as a whole benefit from its advantages. This has been done by using methods like letting ourselves get to know the software, user case studies, workplace studies, interviews and future workshops. This resulted in a prototype introducing a new function designed with all collected data in mind trying to make the software, Visual Units Logistics, even more effective for the every day work practice of the user. A new function to keep track of vehicles outside the main working area at the same time as you still can keep track of the other vehicles in the field..

The project has been done in cooperation with Schenker Åkeri AB in Sweden, Halmstad. Theproject is based on an inspection made by Arbetsmiljöverket, where they found minorshortcomings with distribution of goods for the employees. The project is an investigation ofthe drivers? working environment.Schenker Logistics is one of the world's leading providers of integrated logistics services.Schenker Åkeri AB is a subsidiary to Schenker Logistics and transports 2.4 million tons ofgoods yearly.The project started with a background study to evaluate drivers working environment. Wehave studied goods receptions, the working environment, strain injury and injury mechanisms.Methods used was observations, tests, questionnaire surveys and ergonomic andbiomechanical calculations.One result of the study is a working model, which gives recommendations for the maximumweight a driver should push and pull.