Blast furnace is the heart of every steel plant. Steel production is based on the blast furnace process, as it is where the iron is extracted from the iron ore and turned into liquid iron, which will subsequently be used to make liquid steel. Therefore, without hot iron, steel can not be produced. Blast furnaces in this process are supplied among others with pulverized coal. Raw coal should be prepared for the blast furnaces in the form of fine coal powder.

This thesis is a feasibility study into how Fresenius Kabi may rationalize their destruction process in regards to cost, recycling, and work environment. The two main objectives are to identify scrap flows and the possibility to improve or replace the equipment that is now carrying out the physical scrapping. The flow has been visualized by a flow chart of the material and communication. A chart of the problem established to visualize where improvements are necessary. Based on the problems proposals are presented on how to improve the flow thru the plant.During analyze of the physical scrapping equipment it was also necessary to take a deeper look at how they are carrying out there work today, how does the procedure look like, working environment and where are the weaknesses.

Time studies in dairy production are an essential tool when deciding about level of mechanisation and automatisation both in investment situation and improving efficiency in existing operations. In previous investigations such studies have been carried out during normal barn conditions during winter. Since there is a compulsory to have dairy cows grazing 3 to 5 months during summer time in Sweden time studies during this season is important to have a full picture of needed working time. During grazing season time studies was carried out at 14 dairy farms representing herd sizes from 66 to 450 dairy cows of which 6 farms with AMS. 8 farms were the same as studied during winter season.

During the nineties, ecological handling of urban storm water became very popular in Sweden. Together with Chalmers University of Technology and two Swedish communities, DHI Water and Environment has been doing research of storm water ponds and constructed wetlands. This thesis work is a part of that research project. The work has been applied at the Bäckaslöv storm water treatment plant in Växjö, Sweden. The plant consists of one storm water pond and a downstream constructed wetland.

In many regulated rivers, authorities have stocked hatchery salmon to compensate for loss of wild populations. However, hatchery fish have not always behaved as wild fish do, and stocking them has not always fully compensated for the loss of wild fish. The purpose of this study was to compare swimming behaviour in the river before spawning, the choice of spawning areas and body size between wild and hatchery-reared salmon in the river Klarälven. Salmon behaviour in the river before spawning was analyzed using radio telemetry. The salmon were caught at Forshaga power plant, radio-tagged and returned to Klarälven at Ekshärad, 107 km from the river?s mouth.

Abstract Title: How to source from Russia? - A multiple case study of six companies? experience of purchasing in Russia. Authors: Richard Werthén, Technology ManagementJohan Öhlén, Production Engineering and Management Supervisors: Christer Kedström, Dept of Business Administration Johan Lundin, Dept of Industrial Management and Logistics, Engineering LogisticsRolf Blomgren, Purchasing Manager SR, ScaniaLars Erik Nerback, Purchasing Director SE, Scania Issues: The issues presented are:? What characterise Russia as a supplier market?? Which sourcing experiences have been made by other Swedish companies in Russia?? How can this knowledge be utilised at Scania? Purpose: The purpose of this master thesis is to find out whether it is worthwhile for Scania to look for new suppliers in Russia, based on other Swedish companies? experiences of purchasing in the country. Method: In order to answer the purpose of our thesis the study of Scania?s purchasing organisation has to be complemented with in-depth studies of other companies? purchasing organisations.

Pulsatilla vernalis is one of several endangered plant species that benefit from wildfires and small scale disturbance events that repel competing vegetation and create open patches in the vegetation cover. Previous studies argue that Pulsatilla vernalis is decreasing in numbers due to vegetation changes associated with the decrease in wildfires, forest grazing and changes in forest management. In this study, 17 populations of P. vernalis were inventoried in order to examine if soil and/or vegetation structures affect the population structure of P. vernalis (i.e.

The practice of landscape architectural involves forming the space in our cities and suburbs, as well as the landscape surrounding. The need of exploiting green environment leads up to, among other issues, flood problem during heavy rain and overfed water environments. The problem is partially caused by the shortage of knowledge, how the environment is responding of the innovations made by the city- urban planning and how to get sustainability. Research and knowledge how to take care of our environment, in a natural way, is increasing. The object of the thesis is to propose control and balance in urban wetlands, and discuss the difference a plant design can do. The thesis deals with discourses in the field of landscape architecture, biological diversity, dam construction, limnology, planting design and management, pollution of the environment and urban design practice.

Couch grass (Elymus repens (L.) Gould) is a severe weed in Sweden, and since both the use of herbicides and cultivation should be decreased, it will become increasingly problematic to control couch. The present work is meant to, by literature studies and an experiment, give some answers to the question if cutting and competition can depress the growth of couch. The experiment was carried out in the growing season 2001 at Ultuna, Uppsala, in plastic boxes. The design was three-factorial randomised complete blocks. The factors were plant combination, nitrogen level and cutting strategy.

Uppsalahem is the leading housing corporation in Uppsala with its over 160 real estate properties. Uppsalahem is owned by the municipality of Uppsala, which has a climate and energy goal that aims for 100 MW of solar energy to be installed in Uppsala by 2030. The 100 MW goal, combined with Uppsalahem?s environmental policy, is a strong incentive to investigate the possibility of installing PV modules on the many available roof areas that Uppsalahem possesses. The objective of this thesis is to create a foundation for future decisions regarding PV systems for Uppsalahem.

In the pilot plant at Hammarby Sjöstad, Sjöstadsverket, several new methods are tested in order to achieve a good use of resources. When a new technique is considered it is often the performance of the technique itself, under given conditions, that is evaluated. However, in order to evaluate the overall function the whole picture is needed. With a system analysis it becomes possible to make a comparison where all the positive aspects are put up against the negative ones, for the technique itself as well as its requirements. In this way the influence that minor components have on an entire system can be considered.This report presents a system analysis of an anaerobic membrane reactor (MBR) with a VSEP-membrane (Vibratory Shear Enhanced Process).

This report was written by Lisa Bengtson and Hanna Paradis and describes the degree thesis "Environmental impacts of solid waste treatment in the Metropolitan Region, Santiago, Chile ? a comparison between current system and incineration with energy recovery". The purpose of this thesis was to investigate if incineration with energy recovery could be motivated through an environmental perspective as an alternative to landfilling of solid waste in Santiago, Chile. The study was performed with Life Cycle Analysis as a theoretical base. In Santiago, situated in the thirteenth region of Chile, Región Metropolitana, lives 6,5 million inhabitants. The major part of the solid waste produced in the region is landfilled on three different sanitary controlled landfills situated outside the city center.

Syftet med detta examensarbete är att ur ett Supply Chain Management perspektiv undersöka förutsättningar för att implementera ett tredjepartslogistikföretag från EU i ett växande industriområde i Kina. Detta examensarbete fokuserar på distriktet Xiaohe i staden Guiyang i provinsen Guizhou.Logistikbranschen är en av de snabbast växande industrierna i Kina. Den kinesiska regeringen föreslår en främjande policy för en logistikexpandering som innefattar skattereduceringar och nedsatta priser på lokalhyra och markpriser för logistikföretag. Den största skillnaden mellan marknaden i EU och marknaden i Kina är de kulturella skillnaderna i sättet att göra affärer och att umgås. Korruption kan förekomma i Kina och det är värt att undersöka de kinesiska företagen innan ett samarbete inleds.

Examensarbetet är utfört på Mälardalens högskola våren 2007. Arbetet hardiskuterats och utformats inom ramen av ämnet informationsdesign.Idea plant, uppdragsgivare för arbetet, förespråkar vikten av designadkommunikation. De anser att företag vet för lite om designad kommunikation ochvill därför, genom föreläsningar, visa hur lönsam denna kunskap är för företag.Under arbetet har jag utgått ifrån att besvara följande fråga:Hur bör ett informationsmaterial se ut för att vara god designad kommunikation?Min uppgift har varit att ta fram ett före- och efter material till Idea plantspresentationer om designad kommunikation. En analys av tre företag som ärverksamma inom samma bransch har gjorts.

Contemporary plant design can be examined by how it relates to two extremes - Nature and Art. This idea is explained by Noel Kingsbury in the book The Dynamic Landscape where he places designers and their projects on a gradient (Kingsbury, 2004). Nature, one of the extremes can be represented by a dynamic, species-rich plant design with native species and with nature as the ideal. The other extreme - Art implies a more static view on plant design. Here, the designs consist of colourful flowers, exotic species and cultivars with double flowers.