The Swedish Textile industry has since the beginning of the 70-ties moved their production to countries with cheap labour further and further away. The production in the Baltic countries and Asia has become reality for many Swedish manufacturing companies. With today?s technology the communication with remote countries has ceased to be a problem. The difficulties have instead turned out to be more focused on transportation of goods and just in time deliveries to Sweden.

Background ? The last 20 years healthcare has been facing increased demands on efficiency and increased customer satisfaction. This despite reduced resources and increasing demand. These demands are presents in all departments within healthcare organisations, including medical laboratories that currently receive an ever-increasing number of remittances. Laboratory flows are quickly becoming overloaded with samples and related materials.

Following the accident at the nuclear power plant in Chernobyl in 1986, great volumes of137Cs were distributed over large parts of the former Soviet Union and Europe. Over Scotland,radiocaesium was deposited as wet deposition. Due to the relatively long physical half-life of30 years, there are still measurable activity concentrations in the natural environment. Thisstudy was made on two organic soils, Knockandy Hill and Rora Moss, situated in the easternpart of the central highlands of Scotland. At these two sites, studies on migration and transferbetween soil and plants were conducted.

An increasing number of heat pump producers have developed heat pumps that can be connected to solar panels. In this thesis we have examined the possibilities of connecting solar panels to existing ground source- and geothermal heat pumps that has not been adapted to solar panels. During the work process, a prototype plant has been built to compare our theory with the practical results and with our designed sizing tool. The work has rendered in knowledge that will be used to build a sun module that can be easily connect to the existing heat pump system. The existing heat pump, our test plant, has been supplemented by an advanced storage tank used to allow different operating modes.

The division of Electricity at Uppsala University is developing a wave energy converter(WEC) consisting of a linear generator connected to a bouy at the water surfacethrough a wire cable called the connection line.During extreme conditions, the wave power plant will experience forces up to 500kN, which lead to unnecessary wear and will ultimately cause the failure of theconverter. To prevent this there is a need for a damper.The wave energy converter works at a maximum efficiency when the translator?sare centered with respect to the stator. Due to tidal movements the position of thetranslator can deviate. There for a mechanical divice that will compensate for this isneeded.This report describes the further development of an earlier project where a tidalwave compensator for a wave energy converter of Seabased AB was developed.

Following the accident at the nuclear power plant in Chernobyl in 1986, great volumes of137Cs were distributed over large parts of the former Soviet Union and Europe. Over Scotland,radiocaesium was deposited as wet deposition. Due to the relatively long physical half-life of30 years, there are still measurable activity concentrations in the natural environment. Thisstudy was made on two organic soils, Knockandy Hill and Rora Moss, situated in the easternpart of the central highlands of Scotland. At these two sites, studies on migration and transferbetween soil and plants were conducted.

Logistics is an important concept in the organizational context in which the planning of flows, services and products are treated. Logistics handles supplier management, supply of materials, production and distribution. The distribution of goods can be managed with different types of transportation depending on price and time aspects. The lowest transport cost for larger amount of goods is by maritime shipping. A common carrier used in transportation of goods is a standardized ISO- container.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

The purpose of this report is to find out which crops, that are good for strawfuel, and can be grown i the area around the city of Lund. The background of this report it that Lunds energy is planning to bild a biofuelheated thermal power station in Örtofta outside of Lund. I have in the report limited me to the crops hemp, whole crop (triticale), reed canary grass, elephant grass and jerusalem artichoke. I have through a documentary research checked the crops, cultivabillity in the south of Sweden, and how they should fit, in the Scanian crop sequence. Hemp is an annual crop which probably could manage in the Scanian crop sequence. Whole crop often triticale because of it´s high yield and low rate of shed seed. Could also fit into the crop sequence of crop in Scanian. Triticale is annual, and could be grown at the same kind of fields as used to wheat, whith is why it would be possible to grow it in Scania. Reed canary grass is a reedlike grass that is easy grown at most soils.

AbstractThe purpose of project is to study the possibility for Borås Energy & Environment to build and run a commercial ethanol production facility in Borås. The project also studies the technology for the production of ethanol using renewable energy, e.g. lignocelluloses with focus on two processes, svag-syra hydrolyse and enzymatic hydrolyse. The technology of the process is based of hydrolysation of biomass (hemicelluloses and cellulose) to sugar and extract it to ethanol. These two techniques will compare with each other to determine which of them that it?s more suitable for ethanol production.

Warehouses are a key aspect of modern supply chains and play a vital role in the success or failure of businesses today. Figures from the USA indicate that the capital- and operating costs of warehouses represent about 22 % of a company?s logistics costs while figures from Europe indicate 25 % (Baker & Canessa, 2009). Because warehousing is such an important function within a company, the authors chose to focus on this in their thesis. The purpose of this thesis has been to examine the significance of a Warehouse Management System (WMS) and item identification with attention to logistic efficiency.

Atlas Copco saknar i dag tydliga riktlinjer för hur man skall bryta ner sina reservdelar. Detta har medfört att antalet reservdelar som erbjuds till en komponent, den så kallade köpnivån, skiljer markant mellan olika maskiner och även inom en maskin. Syftet med examensarbetet var att hitta en modell för hur man skall sätta köpnivåer på reservdelar utifrån ett kund- och lönsamhetsperspektiv. Författarna har valt att dela upp arbete i fyra faser. Undersökningen har till stor del bestått av intervjuer och workshops med en stor mängd intressenter i Sverige, Kanada och USA.

Atlas Copco saknar i dag tydliga riktlinjer för hur man skall bryta ner sina reservdelar. Detta har medfört att antalet reservdelar som erbjuds till en komponent, den så kallade köpnivån, skiljer markant mellan olika maskiner och även inom en maskin. Syftet med examensarbetet var att hitta en modell för hur man skall sätta köpnivåer på reservdelar utifrån ett kund- och lönsamhetsperspektiv. Författarna har valt att dela upp arbete i fyra faser. Undersökningen har till stor del bestått av intervjuer och workshops med en stor mängd intressenter i Sverige, Kanada och USA. Respondenterna består av kunder, leverantörer, och personer inom Atlas Copco som direkt berörs av vilken köpnivå företaget erbjuder.

To create a profitable and competitive business an important factor today is a well-functioning logistics. Through effective internal material flows effective logistics can be achieved. Unnecessary handling and movement of materials is a waste which affects the internal material flow. These wastes should be identified and eliminated as much as possible to improve the internal materials handling and through that achieve a more efficient business. At Fagerhults Belysning AB, where professional lighting systems are developed, manufactured and marketed, a new inventory has been built and changes in the assembly has been made during the past year.

The current state of knowledge indicates that there is more than one factor that initiates heartwood transition. This study supports its hypothesis on the theory that heartwood is formed by a fixed fraction of the annual growthring, 0,5 to 0,8 rings. To calculate heartwood volume modelings were carried out in four different pine stands with different spacings, 0,75, 1,25, 1,5 and three meters. The model indicates heartwood diameter (HWD) and is based on four explanatory variables, height (H), crown ratio (CR%), diameter breast height (DBH) and tree height (TH). The shifting plant spacing results in varying growth rate in the juvenile stage.