In Sweden today so-called "prescribed nature conservation burning" is performed due to the change in silvicultural law, certification and an increased knowledge regarding the field of fire in the forest landscape. The aim is to re-create structures and qualities made by the fire regimes of the past, though on a much smaller geographical scale. The structures and qualities to be re-created are for example broad leaf stands, trees with large diameter, heterogeneous stands regarding variables such as age and diameter. If we increase our knowledge of the constitution of forests characterized by fire, then we will be able to set goals for what achievements to reach both on landscape scale and stand scale. The aim of this paper is to try to describe how a stand from the past was composed regarding mainly the spatial arrangement and compare it with the stand of today in the same place. This to be done by using relict material, that is stumps and dead standing trees.

Projektets mål har varit att finna orsaker till delaminering av lamellimmade komponenter vid Stora Enso komponentfabrik i Ljusne. Detta resulterade i en analys av de faktorer, både material- och tillverkningsmässiga, som kunde bidra till en försämrad limfogskvalité. Analysen baserades på standard SS-EN 13307 ?Timber blanks and semi-finished profiles for non-structural uses?. En av de gällande faktorerna som analyserades var presstrycket vid limning.

In this report statistics concerning the reliability of sprinkler systems from seven countries has been analysed. The objective of the report has been to determine the reliability of sprinkler systems in Sweden and to present suggestions on measures to increase the reliability. The main conclusion that has been drawn is that the reliability of sprinkler systems in Sweden is 92 percent according to the analysis of Swedish statistics, and that this figure finds support in statistics from other countries. Further results are that the quality of design, installation, maintenance and inspection of sprinkler has to be improved and that the Swedish incident report has to be revised..

Syftet med examensarbetet är att planera hur Schenker Coldsped ska arbeta för att möta kundens krav, i detta fall Burger King, på att använda regelverket EFSIS ? European FoodSafety Inspection Service. EFSIS erbjuder oberoende inspektionsservice designat för mat, dryck och närliggande branscher. Den standard som Schenker Coldsped AB överväger att certifiera sig emot är EFSIS tekniska standard för lagring och distribution av livsmedel.Coldsped är en del av Schenker Sverige AB. Företaget arbetar med helhetslösningar för transport och lagring av kylda och frysta livsmedel över hela Europa.

Bakgrunden till mitt val av Karlskrona som arbetsområde är ett intresse för hur förbättringar av cykelvägnätet kan öka förutsättningarna för användningen av cykeln som transportmedel i min hemstad. Karlskrona har en god potential att bli en mer aktiv cykelstad. Trots att staden har en speciellt form med sin placering på ett antal öar är den ändå väl samlad på en begränsad yta. Klimatet är bättre än för många andra cykelorter i Sverige, även om vinden är ett påtagligt inslag stora delar av året. I den teoretiska delen redogör jag för de vilkor och förutsättningar som gäller för planering av cykelvägar.

Den här rapporten beskriver arbetet och utförda studier inom området kryptering och VPN. Fokus ligger på hur väl krypteringsalgoritmerna Triple Data Encryption Standard (3DES) och Advanced Encryption Standard (AES) skalar i en förutbestämd miljö. Huvudfokus har varit att svara på frågan: Vilken av krypteringsalgoritmerna AES och 3DES kräver minst systemresurser? Under utbildningstiden har det flera gånger framförts att 3DES-algoritmen skulle vara mer krävande för krypteringsenheterna att utföra jämfört med AES. Denna rapport söker finna om det är så det förhåller sig och i så fall hur stor skillnaden är mellan algoritmerna.

In order to understand the human impact on today?s remaining ?virgin? forest and to develop sensible management strategies for future reserves, it is necessary to know how these forests have developed. This knowledge can be gained by using forest history analysis. here are large areas of forests still untouched by modern forestry in the mountainous region in the county of Norrbotten. These forests are highly interesting study objects from an ecological and historical point of view.

Många utav de krav som idag utformas uppfyller inte kriterierna för att vara högkvalitativa. Denna undersökning behandlar hur användbarhetskrav formuleras i kravspecifikationer. Vi har i vår undersökning utgått ifrån en internationell standard (ISO/IEC/IEEE-29148), som innehåller kriterier för hur både individuella och uppsättningar av krav ska formuleras, som teoretisk modell. Dessa kriterier har vi forskningsförankrat genom att studera vad andra forskare sagt om dessa och därefter har vi använt modellen för att genomföra en dokumentanalys av fem olika kravspecifikationer för fem olika informationssystem. Våra slutsatser påvisar att det kan finnas en brist på kunskap kring hur krav bör formuleras i en kravspecifikation och vi belyser även de samband som finns mellan olika grader av uppfyllelse för kriterier hämtade från ISO/IEC/IEEE-standarden och praktiken.

Energi är en resurs som måste användas effektiv för att undvika onödig negativ miljöpåverkan och utgifter. Återmatning från nedåtgående malmtåg till uppåtgående malmtåg leder till en effektivisering i energiutnyttjande. Beräkningen av den återmatade energin utgår ifrån tågets lägesenergi och förlusterna från räls, lutning, vind och kurvor. Totalt kan återmatning av energi ge en besparing på 20 % för enkelspår och 20 % respektive 21 % för dubbelspår. Dubbelspår kan ha mer trafik än enkelspår men förhållandet mellan konsumerad och återmatad energi är i princip den samma.

Modelling of pollutants is commonly used in research and at departments working with environmental issues. The need to use large amounts of data when modelling creates the opportunity for more generalised models with lower data demands. Aggregating functions into coarser elements is a sort of generalisation of actual features in nature.A development of a method and a modelling tool called ?KadmiumKalkylatorn? has been performed to model cadmium pollution in rivers in Skåne, Sweden. The water runoff has been multiplied with cadmium standard concentrations based on membership in landuse classes.

The goal of this project was to make the requirement process at the Swedish Coastguard more effective. The first step to achieve this was done by locating bottle necks in the process with value stream mapping method. The result of this study showed that the biggest restriction in the requirement process was while examining older requirement documents to understand what elements were suitable for the particular project. This was followed by a study of literature, interviews and theory of Lean Production with the ambition to investigate how the requirement process was handled on other companies and how to improve the process on the Swedish coast guard. This led to a number of potential enhancements of the process which later was evaluated.

This thesis engages the topic of test methods for wood adhesives. Two test methods were evaluated, EN 302-1, a European standard, and ASTM D905, an American standard. The total amount of specimens manufactured and tested was more than 500. The adhesive bonds were tested in shear with an increasing load on the specimen until failure.The adhesives used were epoxy-resin, phenol-resorcinol-formaldehyde and a 2-K polyurethane. The test programme included five different types of intentional errors per method, in order to investigate the sensitivity of the test methods.

The purpose of this report is to simplify the process of designing carbon fiber strengthening for existing concrete constructions, specifically beams. The intention has been to establish a flow chart containing information on the necessary testing and calculations for the design, to as far degree it is possible satisfy the requirements stipulated by Swedish and by extension, European authorities.To do this the report will examine a parking garage situated underground by Akademiska Sjukhuset, Uppsala. The parking garage was built in the mid-seventies, and has in recent years been subjected to a greater load than designed for by the construction of a road on top of it. FEM-Design has been used to obtain the internalforces of the beams and thereby determine whether they are in need of strengthening or not and thereafter design the strengthening according to Täljsten (2006) with some corrections from Täljsten (2011) due to new regulations.The result of this report is that the flow chart used is viable to design carbon fiber strengthening, atleast with the conditions met in our reference project.The conclusion drawn after working with this report is that there is a need for a clear standard for carbon fiber strengthening , preferably a standard that can be used throughout Europe..

Title: Kvarteret Tvättstugan, an apartment building with massive wood construction. A thesis about acoustic and fire requirements and a comparison of energy and moisture aspects. Earlier restrictions in the Swedish legislation have resulted that only a small percentage of the apartment buildings that have been built are designed with a massive wood construction. It has been allowed to build unrestricted with wood since 1994 as long as the function of requirements are fulfilled. This change in the rules together with the great environmental benefits of wood has led to that more companies choose to build apartment buildings with wood. One of these companies is Folkhem Production AB.

In this project a simulator has been developed (in C++) with the purpose of illustrating how changes in environmental regulations, tax levels and other policy measures affect the composition of an energy system. The aim of the project was to investigate how energy companies? investment strategies are affected when changes in economic and environmental conditions occur. A standard scenario has been created based on current Swedish conditions, but the user can create new scenarios and set parameters freely. The user is tasked with building power plants to supply the city/region with district heating and electricity during a pre-set number of years. When the simulation is finished the result is graded in the following categories: economy, environment and quality. To evaluate the simulator three scenarios were created (?early 20th century?, ?reduced environmental control? and ?future?) in addition to the standard scenario and these were compared with each other by examining how a select group of power plants perform under the given conditions.