Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Abstract The IT- business is a fast growing business trade. This expansive line of business continuously demands flexibility both economically and legally. It is, today, of great importance to have knowledge about your own trade especially when it comes to new agreements. Laws and regulations are seldom flexible and adaptable tools, this is due to the fact it takes time to create new laws and, above all, it takes time to create laws with the right effect. This is where standard agreements enter the scene.

This report describes an bachelor thesis work which is performed in cooperation with SVIA that develops and sells automation solutions for the manufacturing industry. The thesis purpose was to evaluate the machine FeedLine to find opportunities for improvement in the product?s design that could lead to more standardization and thus improving the efficiency of manufacturing and assembly.Based on these basic issues suggestions for improvements were developed:How can the design of FeedLine be improved to facilitate the assembly?Can more standardization be imposed on FeedLine?s design to enable more stocking of standard components?An initial pre-study was conducted to evaluate FeedLine?s to find opportunities for improvement in its overall design. During the pre-study staff at SVIA and two of its clients was interviewed. Based on information gathered during the interviews and observations by the authors improvements was amendments.

As break downs of production transformers are costly and often result in long outages it is essential for reliability of operation that the transformers are manufactured to be robust. The aim of this M.Sc. thesis is to investigate if deviations should be made from the standard IEC 60076 ? Power Transformers in order to describe a robust large power transformer for procurement.The investigation has been conducted in three stages. In the first stage a definition of the term robust was developed in consultation with the client Vattenfall Vattenkraft.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Problemet med dagens standard för hygienrum och dess komponenter är att de baseras helt på tillgänglighet. Vilket i och för sig är en bra sak, sett utifrån att fler personer kan ha möjligheten att utnyttja bostadsfunktionerna även om de har vissa rörelsehinder. Men vi vill ta steget längre, inte endast se till tillgänglighet utan även se till vad som kan uppskattas, för att höja levnadsstandarden och uppskattningen av våra hem. Den svenska standarden är som tidigare nämnt baserad på tillgänglighet och är inte alltid anpassningsbar till nya lösningar och komponenter som kan förekomma i badrum, vissa saker ändras, får nya funktioner, kanske utökade användningsområden. Syftet är att försöka utöka möjligheten att nå högre kvalité för badrummet och samtidigt försöka se till de alternativa lösningarna som kan åstadkommas idag.

En central del i ett systemutvecklingsprojekt är de tekniker som används för att strukturera organisationer och informationen i dessa. I flera årtionden har traditionella tekniker utvecklats. Exempel på tekniker som anses traditionella är ER-modellering och dataflödesdiagram. Idag används objektorienterade programspråk mer och mer för att implementera databaser. Det har dock inte funnits stöd för att analysera ett system objektorienterat förrän i början på 1990-talet.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The aim with this study is to understand how social workers at the individual- and family sector think about child poverty and how they work with and reason about the preventive and facilitate work they do for financial vulnerable families. We have in our study used qualitative method through semi-structured interviews with social workers at the individual- and family sector to answer our purpose. The results showed that child poverty is a concept hard to define and not well established. The social workers have divided views on child poverty but still at the same time mean that it exists amongst the families they meet. There is also a big difference between municipalities and their reasoning on what a reasonable standard of living is for a financial vulnerable family and how they work with preventing child poverty.

This report's aim is that by field measurements determine the function of Aprobo soundproofing material dB2 for reducing impact sounds, the measurements is done in ?the school for fine art? in Umeå also known as ?konstnärligt campus building nine?. The construction technique is used in areas sensitive to impact sound between different floors in the building. The measurement?s is also to do a function control of the buildings sound quality compared to Swedish and European standard when it comes to air sound, impact sound and reverberation time .

On ocean beds around the world sinking particles of residual biomass from animals and vegetation have, over time, accumulated into thick layers of sediment. For researchers these layers of sediment contain valuable information about the earth?s past climate, information that can be used to predict future climate change and to estimate natural vs. human causes of today?s global warming.The Institute of Geosciences at Stockholm University studies sediment cores that have been acquired with an apparatus called piston corer.

The goal of this project was to make the requirement process at the Swedish Coastguard more effective. The first step to achieve this was done by locating bottle necks in the process with value stream mapping method. The result of this study showed that the biggest restriction in the requirement process was while examining older requirement documents to understand what elements were suitable for the particular project. This was followed by a study of literature, interviews and theory of Lean Production with the ambition to investigate how the requirement process was handled on other companies and how to improve the process on the Swedish coast guard. This led to a number of potential enhancements of the process which later was evaluated. Requirements written by different people in different organizations were analyzed in order to sort out if there were some similarities? which could be used as standard elements in a future standardization of the process.

Bakgrund och problem: Intäkter är en viktig post i den finansiella rapporteringen för användares beslutsfattande. Dock omgärdas intäktsredovisningen av flera svårigheter gällande bedömningar av när och till vilket belopp intäkter ska redovisas. Detta är speciellt ett problem vid redovisning av uppdrag som löper över flera redovisningsperioder, vilket är vanligt i byggbranschen. IASB har haft ett förslag till en ny standard för intäktsredovisning ute på remiss och IASB:s främsta syfte är att redovisningen ska vara användbar för användare av finansiella rapporter. Införandet av en ny standard kommer att innebära förändringar i byggbolagens redovisning och därmed även användbarheten i redovisningsinformationen.

I nuläget finns det ingen standard för utvärdering av mätosäkerheter för terrester laserskanner (TLS), detta trots att instrumentet funnits på marknaden och använts länge. Eftersom tillverkarens specifikationer inte alltid överensstämmer, är det viktigt att ha kunskap om hur bra instrumentet presterar. Ett flertal studier har under det senaste decenniet tillämpat olika metoder för att undersöka mätosäkerheten på olika TLS.Syftet med denna studie var att utvärdera och jämföra mätosäkerheterna mellan Leica ScanStation C10, som är en renodlad TLS, och Leica Nova MS50, som är en totalstation med skanningsfunktion, under två olika väderförhållanden. Osäkerheterna togs fram genom att använda ISO 17123-5:2012, som egentligen är en internationell standard för framtagande av totalstationers mätosäkerheter, för att undersöka om denna standard även kan appliceras på TLS. Undersökningen, som skedde utomhus vid Högskolan i Gävle, genomfördes genom att skanna signaler som ställts upp i en triangelformation från tre stationer.