The purpose of this Bachelor thesis is to analyze if there is a correlation between stock prices and the amount of searches of the companies names on Google. The theories used in the study were Capital Asset Pricing Model (CAPM) and Efficient Market Hypothesis (EMH). Regressions analysis is used as the statistical method to see if there is a significant correlation between the stock prices and the amout of searches of the company name on Google. The data used were the rate of return of three companies (ABB, Oriflame and Sandvik) on the Nasdaq OMX Nordic stock market, the rate of return of the Nasdaq OMX Nordic stock market index (OMX Stockholm_PI) and the Google search frequency from Google Trends on each company. The result showed no significance and the conclusion of the thesis is that there is no significant correlation between the three studied companies and their search frequency on the search engine Google..

This pre-study investigates the possibility of U-value measurements through an acoustic method. A hypothesis about an acoustic model built on acoustic theories combined with U-value theories is presented to answer the questions: ? Can U-value theory be combined with acoustic theories? ? Can the coefficient of heat be affirmed trough an acoustic measurement? The idea for this dissertation begun with a logical idea in mathematical similarity, between the coefficient of heat transmission units and sound intensity units. The U-value theory is based on assumptions such as initial resistance for inner walls and initial resistance for outer walls. The resistance in the material is interpreted through sound intensity theory. The argument is built upon mass law theory, which means if the frequency or thickness of the material layer doubles it implies an increase of sound reduction by 6 dB.

The communication with government and municipality through Internet has in-creased during the last couple of years. Therefore we have chosen to focus our bachelor thesis in this particularly area and the needs for usable web services for the citizens. In this bachelor thesis we are studying a increasing group users, namely elderly citizens. During the study we have analysed E-governments ser-vices usability through usability tests. The combination of conversations and meetings with individuals, observations of interactions and literature studies give us the opportunity to explore the users needs.

There are two species of potato cyst nematode (PCN), the yellow, Globodera rostochiensis, and the white, Globodera pallida. Each of them can appear in different pathotypes. These are separated by testing the nematode ability to multiply on a number of potato cultivars with different resistance properties. The aim of this project was to examine the virulence of Swedish and foreign PCN populations and to compare two test methods. Biotests are today the only available tests used to study virulence.

This paper aims to investigate if the underlying effects of the marketing phenomena clutter can be explained by negative priming. Although a lot of research has been made in the field of marketing, many people still claim "all marketing is good marketing", which we intended to challenge. In order to do this a tailored experiment analyzing the effects of clutter was created. The experiment consisted of two activities with the objective to manipulate the participants by making them avoid distracters. To maintain high ecological validity throughout the experiment actual brands were used as distracters.

Idre Fjäll currently has not full control of how visitors experience their site or if it has good usability. I have helped the company to do a usability test on their website to see how and where any improvements can be made on the page before the winter season 2010. I have also done a survey to investigate how users perceive Idre Fjälls website. Ten people of various ages participated in the survey. All test subjects was recorded with both audio and screen activity during the tests.

This technical report describes the master thesis in material engineering called ?Testing of surfaced hardened materials conceivable for gears and shafts?. The work extents 20 academic points. Land systems Hägglunds manufactures and sells different kinds of combat vehicles and terrain vehicles. Since the demands for bigger and stronger vehicles increases all the time, so are the demands on shafts, gears and other transmission details.

The idea with this study is to examine if there are a connection between how optimistic people are in relation to how stressed they feel. The result from the survey is based on materials from a questionnaire has been sent to fifty persons of varying age and sexes. The questionnaire has also been sent to students from Karlstad University but also to friends and acquaintances. The data is measured with SE- and LOT-tests. The issues concerned in which scope respondents experiences themselves stressed and optimistic and how the connection is between experienced stress and optimism in relation to results on the figure tests.

This Master Thesis has been conducted as an assignment of the Swedish Defence MaterialAdministration and the Swedish Armed Forces and aims to examine the Target Location Error(TLE) of a Forward Observer System. The targeting accuracy of the system is vital if the systemis to be used as a sensor for precision munitions. The analyzed system, EOI (FOI 2000), wasdelivered to the Swedish Armed Forces in 2007. The targeting sequence starts with deciding theposition of the system with a GPS-receiver, continues with methods where the north direction issettled and ends by measuring the distance, direction and elevation to the target. When allparameters have been measured the system calculates the position of the target.

The project was made in cooperation with Coffee Queen AB, Arvika. The task was to develop and design a new cooler for the milk to Jura Impressa X9, an espresso machine. The good assistance with staff at Coffee Queen and engineers in China and at KPA in Karlstad led to a solution to the problem. It was a long road to get there, many different concepts was developed. When the day came to decide which concept to work with, the choice stood between two different technical solutions.

This master thesis was a subtask of a project called EMIR-1. The goal with the thesis was tobuild a system for particulate mass measurements in one of the engine test cells at KTH. Theparticulate mass measurements are planned to be measured with a TEOM.The exhaust gases must first be diluted with air before the sample is sent to the TEOM.Therefore an ejector diluter for this matter also was designed and evaluated in the thesis.Emissions measurements have been done both with and without dilution to determine thedilution ratio. Tests have been done for different speeds and loads.Problems with stability of the dilution ratio have been an issue throughout the process andpressure pulsations in the exhaust pipe are believed to be the cause. More tests have to be done tomake sure that this is the problem.One idea is to make the inner diameter of the diluter nozzle smaller and see if it changes thedilution ratio stability.

The market for heavy duty engines is constantly requiring engines that should be more andmore powerful, while still maintaining low fuel consumption. As a result of increasing enginepower, the engine and coolant temperature increases as well due to insufficient coolingperformance (because of design issues, cost etc.).Also, emission legislations, both current and future, require more and more measures to betaken by engine manufacturers. One way of meeting the legislations is the use of cooled EGR(Exhaust Gas Recirculation), which also lead to increased coolant temperatures.Both these factors also naturally lead to increased engine oil temperatures, the consequencesof which are not thoroughly investigated.This thesis project aims to investigate effects of high temperatures on engine oil degradation,with focus on the greatest degradation process: oxidation. To do this several engine runs havebeen performed on a 310 hp engine with EGR to see what happens to the engine oil in a realengine when exposed to high temperatures. During the tests oil samples have been taken andanalysed for important parameters.As a complement to these engine tests some laboratory oxidation testing have also beenperformed, to be able to compare engine test data with laboratory tests.One goal of the project was to try to formulate an empirical oxidation model, which would beable to predict oil oxidation levels in an engine, given any running parameters.

Already in 1988, different levels of participation in the election between different districts of big cities in Sweden were noticed. The problem with low political participation in specific areas has almost always been theoretically explained through an individual perspective. This study is therefore focusing on the problem from a contextual perspective. The hypothesis for the study is as follows, in the case of Malmö the level of participation in elections are affected by social environment in which segregation will be the single highest factor. The dependent variable, participation in the election was tested by the independent variables representing social environment; origin, education, gainfully employed and income.

Glulam is a product that was engineered to make use of timber in a more efficient way. Bychoosing timber of similar quality and discarding natural defects during production, thedevelopment of a stronger cross-section is achieved.Carbon fiber is a relatively new material with a high tension capacity. This feature is used toexamine how the bending capacity of the beams improve by adhering carbon fiber laminateson the lower edge of the beamsThe strength of the material is tested with three experiments: carbon fiber on the bottom of thebeam (a), carbon fiber attached to the lower sides of the beam (b) and carbon fiber in thebeam, covered with a layer of wood (c)The results show that the first case, where the carbon fiber is attached to the bottom of thebeam, gave the best result with an increase in capacity of 59 % compared to the nonreinforcedcontrol. The other two cases also show an improvement in capacity, beam-type 3had a capacity increase of 47% and beam-type 4 increased with 25 %Tests were also made with glulam beams reinforced with fiberglass, but these tests were notanalyzed in depth because the purpose was to compare the capacity to carbon fiber. Thisbeam improved its capacity by 40.3%.The tests show that carbon fiber as a reinforcement material for glulam is a good choice whenthere is a requirement for stronger cross-sections in both new production and renovation ofold buildings.

One of our reasons is that we think the subject usability is interesting, is that we think it is an important. Usability is maybe the most important element when you develop or choose a system because it can save money for the companies and give the users a more delightful and better work environment. The aim of the investigation is to find out if the implementation of a web portal is a direction to reach higher usability in a complex system that consists of several different interacting applications. The objective of our investigation is to show if the implementation of a web portal is a direction to reach higher usability in a complex system that consists of several different interacting applications. In our case we will try to see if Karlshamns AB:s recently implemented web portal is more useful than their previous application (Movex with interacting programs) One thought with the report is to give the system developers a perspective of how the usability can be in-house made applications versus standard applications.