Background: The most energy efficient houses today are so called passive houses. These houses achieve high energy-efficiency partly by having well insulated walls. U-value describes the amount of heat transfered through a building element, the more insulation, the smaller U-value. A typical passive house wall have a U-value of 0.10 W/m2,°C. The passive houses are primarily made as small family houses and not as a block of apartments.

This thesis, designed as a case study, is about complications concerning conservation of a decorative oil paint on lime plaster from the drawing-room in Mostorp castle sited in the county of Halland in south-west of Sweden. The building was built 1878-80 with an exterior of granite. The interior walls were made of clay bricks, lime mortar and lime plaster. The oil paint is applied to a layer of putty. The combination of different materials, which are organic and inorganic, affects the movement caused by internal and external stress.

Cycle time has a direct influence on number of returnable crates needed and therefore a crucial parameter for cost structure and pricing of the user fec in the pool system.For providing the growing market, number of crates has to increase as well as the utilization of existing crates. To accomplish this aim, cycle time for the whole supply chain has to be fully unravelled and understand.The purpose is to map cycle time and stock movements, to see how, where and when crates are being used in the supply chain. The goal is to make a method of cycle time calculation, together with suggestions of improving the pool system and decrease cycle time.The study has been a combination of qualitative and quantitative research and comprises the three biggest wholesalers in Sweden; ICA, Coop and Axfood. Furthermore have 65 grocery shops, connected to the wholesalers, been investigated and mapped.The study has come to a conclusion that cycle time for an average returnable crate is 19 days. The full-size and half-size crates have a bit longer cycle time, 21-22 days, while Dual Height-crates and shallow haif-size crates have 17-18 days.

This report presents suggestions and recommendations on how to convert an old industrial building, built in 1958, to an office hotel. One of the main criteria was that the floor plan should be flexible. The building is situated at Jonsereds Fabriker and the study was conducted for Hantverkslokaler i Göteborg AB, the estate owner.The survey is initiated with study visits at various office hotels, together with studies of literature regarding office planning. One conclusion from the study visits is that meeting-places, where the different companies can meet and exchange ideas and services, are important. Another one, and probably the most important parameter when planning offices is that they should have windows.

 This study was conducted in autumn 2008 on the Company AB, which is currently in a growth phase. The company manufactures hydraulic systems for the heavy vehicle industry and has annual sales of approximately 250 MSEK with 165 employees.The rapid growth and unchanged planning is the starting point for this report. It all began in 2005 when the company received an unusually large order. During this period, the first priority was to satisfy customers and all other focus was disregarded. This has primarily resulted in a messy production and long throughput times.

Uganda is one country with fastest growing populations in the world and with more than 25% of the population living in poverty. There is a rapid rural urban migration with increasing demands for food for low income earners especially in these areas. One way to mitigate food insecurity is to increase milk and meat production efficiency, and thus reproductive performance of cows is crucial for good production. A well-documented strategy for improving dairy cow productivity through faster genetic improvement is to breed dairy cows using proven semen via artificial insemination (AI). AI has been used in Uganda for over 60 years but only less than 10 %, a small population of the country?s herd has been bred that way. The aims were to study knowledge, attitude and practices factors influencing cow fertility results on dairy farms around Kampala using AI and to propose ways of promoting increased use of AI in Uganda.

Spitz nevus was first described by Sophie Spitz in 1948 as juvenile melanoma. The lesion is a benign melanocytic tumor, which consists of epiteloid- and spindelshaped cells. Histological is spitz nevus difficult to distinguish from malign melanomas and spitzoid melanomas. Loss of symmetry, loss of maturation in the deep component, nuclear polymorphism and hyper chromatic nucleus are features which can be found in melanomas. Some of these features are often seen in spitz nevus.

This EEF-project is a part of a larger project at SLU, Division of Reproduction, Dept of Clinical Science, with the intention of developing and evaluating new methods for the assessment of stallion semen quality. Over the last 10 years there has been an increase in the use of artificial insemination with cooled semen in Swedish horse breeding. At the same time, foaling rates have decreased. This has lead to a need for new and better methods of assessing the quality of stallion semen. This EEF-project was based on an objective method to calculate motility, with QualispermTM, in fresh and cooled stallion semen, and after selection. Today sperm motility evaluation is mainly done subjectively by visual assessment with a light microscope, and the correlation between these motility results and fertility have varied.

För att en kvalitativ och driftsäker kraftomvandling från vind till elkraft skall erhållas ställs krav på en mängd olika faktorer. Klimatologiska och tekniska faktorer kräver korrekt dimensionering och anpassning av omvandlingstekniken för att största möjliga energimängd skall kunna omvandlas på ett driftsäkert och energieffektivt vis som vindkraftsägare, nätägare kräver. Vinden är som bekant en oberäknelig kraftkälla. Variationerna i styrka och tid kan innebära en hel del driftoptimeringsproblematik med efterverkningar för vindkraftsverket, nätet och belastningen. Konsekvenserna kan bero på vilken typ av teknik som är installerad i de olika delarna av energisystemet och i områdets elnät.

This master thesis deals with two case studies in environmental archaeology and battlefield archaeology focusing on two major events in the late history of the Swedish coastal town Umeå and its nearby village Sävar. Established in the early 1600's, Umeå was known for its export of timber and import of cereals. The town has suffered from numerous fires, the fire in 1888 being the most devastating. Few written records of the town remain from before the 1900's. The latest war in Sweden's history is documented in historical sources and took place at Krutbrånet, Sävar where the Swedish troops suffered defeat against the russian forces in 1809.

Bakgrunden till detta examensarbete var att Qumex Materialteknik vid ett flertal tillfällen konstaterat att material av typen SS 0725 har uppvisat bristfälliga härdresultat. Materialet, som är relativt nytt på marknaden, är ett gjutjärn av typen segjärn och utmärker sig gentemot andra segjärn på grund av sitt höga innehåll av kisel. Då segjärn enligt den nu gällande EN-standarden klassificeras efter sina mekaniska egenskaper uppstår ett problem gällande SS 0725. Materialet uppfyller de krav som är ställda för EN-GJS-500-7 och hamnar därmed under samma materialbeteckning som ett segjärn med betydligt lägre kiselhalt. Att två material med olika kemisk sammansättning hamnar under samma beteckning kan innebära problem.

In this thesis, input data for energy performance calculations on commercialpremises have been studied. In energy performance calculations, where internal heat gain parameters are unknown, template values that, in a reasonable way represent the activity in the room, are necessary. These values can be used as input data for whole-year calculations, or for calculations on shorter periods of time.The purpose of the Sveby project is to create standardized work practice in energy issues for the construction industry. The work in this thesis is conducted to correlate with the purpose of the Sveby project, with aims of contributing with information and guidelines for the continuing work with commercial premises.In this report, suggestions for template values for internal gains parameters, based on research and calculations in the field are presented. Suggestions on how these can be implemented in a user-friendly way for two energy performance calculation software are also given, VIP Energy and IDA ICE.

I takt med stigande energipriser finner fler och fler det lönsamt att installera värmepump för att reducera sitt energibehov. Värmepumpar har dock svårigheter att tillgodose värmebehovet när utomhustemperaturen sjunker under -10°C. Detta problem kan minskas med så kallade economizerkopplingar, denna rapport jämför de båda economizersystemen flash tank cycle (FTC) och internal heat exchanger cycle (IHXC). Eftersom det har visat sig att vinsterna med economizerkopplingar är som störst då temperaturlyftet är stort är det mest intressant att jämföra dem i luft/vatten värmepumpar. Detta på grund av att övriga applikationer som berg-, jord- eller luft/luft-värmepumpar inte utsätts för samma stora temperaturvariation då utetemperaturen faller.

Abstract In this report I describe the Health Care Advice Bureau?s (sjukvårdsrådgivningen) historical background, proposals for its development according to a committee from the Blekinge County Council (Landstinget Blekinge), the Health Care Advice Bureau?s cooperation with different external operators e.g. the SOS and the Care Centers [Vårdcentraler]. I account for how I, in the same county council, aided by ethnographical methods observed or investigated the following: The nurses? interaction with the patients, the nurses? interaction among themselves, the nurses? participation in the development of the system and also the computer based system?s technical qualifications.

The construction of buildings and paved surfaces changes the natural water balance.Precipitation generates surface runoff and storm water instead of infiltrating into the soil.Storm water has come to be considered as a major source of pollution in lakes and streams inthe vicinity of urban areas. Reduction of pollutants in storm water is a key action in order toprotect sensitive recipients and maintain high water quality. Storm water is traditionallytransported by storm sewers to the nearest recipient. In recent years the approach to stormwater management has changed; storm water should primarily be disposed of on site, throughlocal disposal of storm water, LOD. LOD is created by a combination of the function ofseveral smaller local facilities and the general sewer system.