This thesis work is made by Torbjörn Johansson on Karlstad University for Uddeholms AB. The assignment in this thesis work was to investigate tough cutting in three different tool steels: Vanadis 4 Extra, Vancron 40 and Sverker 21. The research was to compare the wear of the tool after cutting in each one of the tool steel alloys. The research was also made to see if the tool cutting in Vancron 40 has a better wear than the tool cutting in Vanadis 4 Extra and also compare the results with Sverker 21. All three of these alloys are a part of Uddeholms AB:s range of products, and is used in applications like forming tools and knife tools. Vancron 40 is a powder steel with a very good combination of mechanical properties like ductility, adhesive strength and hardness.

A study was carried in conjunction with the Orthodontic department at Halmstad General Hospital in Sweden to investigate the possibility of reducing cost and manufacture time of dental implant drill guides. The current system involves sending a digital image in STL format to the Materialise factory in Belgium where information of the position of dental implants is translated onto a moulded mouthpiece. Drill guides are placed in the mouth piece which is then returned to the surgeon. The mouthpiece complete with drill guides is then placed in the patients mouth and used as a guide for the implant drill holes. The cost of 10000 sek and a turnaround time of 2 weeks gave rise to the need for a faster and cheaper solution.

Denna studie har undersökt publikens upplevelser och preferens om stereo i PA-sammanhang. Två högtalare krävs för stereo, men två högtalare som täcker samma yta ger också upphov till kamfiltereffekt. Frågan är om vanliga konsertbesökare stör sig på detta kamfilterproblem så mycket att de skulle föredra att lyssna på en högtalare i en monosituation. Eller om de föredrar att höra båda högtalarna och få en stereoupplevelse. Denna studie utför ett lyssningstest som försöker svara på denna fråga med hjälp av en studiomix anpassad för att likna en PA mix.

This report is part of a Bachelor?s degree corresponding to 15 creditsat the Royal Institute of Technology, Stockholm. The work hasbeen carried out by Max Wikander, author of the report, supervisedby Lanie Gutierrez-Farewik and Erik Dijkstra.Gait analysis includes measurement, characterization and assessmentof human movement and is used to assess kinematic or otherabnormalities during gait. Center of rotation and the axis of rotationof a joint are fundamental parameters in motion analysis. However,the ability to create individualized analysis is limited by the lack ofaccuracy when these parameters are calculated.

Social a?ngeststo?rning (SAD) a?r ett a?ngestsyndrom som orsakar stor funktionsnedsa?ttning och fo?rsa?mrad livskvalitet. I fo?religgande studie presenteras fo?rklaringsmodeller till SAD med fokus pa? temperamentsforskning och reinforcement sensitivity theory (RST). Syftet var att genom explorativ faktoranalys identifiera latenta variabler i fra?geformula?ret ?Hur man var som barn? (HMVSB), som administrerats i en klinisk population (n= 100) och i en kontrollgrupp (n= 246).

This report is part of a Bachelor?s degree corresponding to 15 creditsat the Royal Institute of Technology, Stockholm. The work hasbeen carried out by Max Wikander, author of the report, supervisedby Lanie Gutierrez-Farewik and Erik Dijkstra.Gait analysis includes measurement, characterization and assessmentof human movement and is used to assess kinematic or otherabnormalities during gait. Center of rotation and the axis of rotationof a joint are fundamental parameters in motion analysis. However,the ability to create individualized analysis is limited by the lack ofaccuracy when these parameters are calculated.

During spring 2009 a three meter tall and laughing robot was developed in collaboration between Royal Institute of Technology and Royal University College of Fine Arts. The robots function and esthetics is based on an existing toy robot called Elmo. Elmo is 30 cm tall but now the goal was to make it 1000 times bigger in order to present it on the spring exhibition of Royal University College of Fine Arts. Due to only four months of developing and building time a demand of fast determination and good planning was required. In order to make a good structure for the project it is divided into five phases: Analysis of Elmo, planning, concept development, detail construction and finally product development and testing.In the first phase valuable knowledge is obtained according to the movements and geometry of Elmo.

This report is part of a Bachelor?s degree corresponding to 15 creditsat the Royal Institute of Technology, Stockholm. The work hasbeen carried out by Max Wikander, author of the report, supervisedby Lanie Gutierrez-Farewik and Erik Dijkstra.Gait analysis includes measurement, characterization and assessmentof human movement and is used to assess kinematic or otherabnormalities during gait. Center of rotation and the axis of rotationof a joint are fundamental parameters in motion analysis. However,the ability to create individualized analysis is limited by the lack ofaccuracy when these parameters are calculated.

Sammanfattning Uppsatsens titel: Delårsrapporter- Hur viktig är granskning för trovärdigheten? Seminariedatum: 17 januari 2002 Ämne/kurs: Kandidatuppsats i redovisning, 10 poäng Författare: Mats Eriksson Mary Johansson Caroline Karlsson Gustaf Sandberg Handledare: Fredrik Ljungdahl Företag: Active Biotech, Andersen, Aspiro, Axis, Deloitte & Touche, Ernst & Young, KPMG, Switchcore Sex nyckelord:Informationsgivning, delårsrapporter, översiktlig granskning, regleringar, utveckling, assurance Syfte: Vårt syfte med uppsatsen har varit att besvara följande frågor: På vilka grunder tas beslut om granskning? Har granskade delårsrapporter högre trovärdighet? Finns det någon alternativ metod, förutom granskning, som kan garantera tillförlitlighet i delårsrapporter? Metod: Vi har valt att genom abduktion behandla granskning av delårsrapporter ur revisorers och företags perspektiv. För att samla in empiri har vi gjort intervjuer med båda grupperna. Denna har vi sedan analyserat tillsammans med annan primär data för att komma fram till våra slutsatser. Slutsatser: Vi anser inte det nödvändigt med utökad reglering av granskningen av delårsrapporter.

This Master Thesis is a product development project that has been carried out in cooperation with Scania CV AB. The purpose has been to find the relationship between geometric parameters and the swirl number for an XPI- cylinder head in order to improve the design specification.The increased focus on environmental issues from society leads to tighter emission legislations for the truck manufactures. In order to drive the development forward considerable resources are spent on research and development on diesel engines and its combustion process. The inlet air has a significant impact on the formation of emissions and the flow that is desired is called swirl. Swirl is achieved by making the air rotate around the vertical axis of the cylinder.Earlier cylinder heads that has been developed at Scania CV AB have shown clear relationships between geometric parameters of the cylinder head and the swirl number.

Denna examensrapport redogör för hur man kan få en kortslutningsskyddadoch säker inkoppling av en DC-länk mellan två skiljda elektriska system.Rapporten bygger på hur en lastbil ska kunna få en större säkerhet för attbibehålla sina elektriska bromsar om tex ett av bromssystemen tappar sinordinarie matning.Lastbilens bromssystem består idag av två skiljda elektriska system med ett 24volts strömförsörjande batteri vardera. Det ingår två stycken elektriskabromsar i varje system. Om det tex blir fel på en av bromsarna och dennapåverkar ett av systemen vill man kunna koppla bort denna enskilda bromsmed sitt system. Man vill även kunna försörja den fungerande bromsen somsitter i samma system via en så kallad Axle Link. Denna strömmatningslänksitter mellan två hjulpar på samma axel.I denna studie undersöktes möjligheten att realisera en kortslutningsskyddadoch säker DC-överföring via en Axle Link, i första hand med diskretakomponenter.

The presence of cystic ovarian follicles represents an important ovarian dysfunction and is a major cause of reproductive failure in dairy cattle. A cystic ovarian follicle is a persistent follicular-like structure on one or both of the ovaries. It is at least 2,5cm in diameter and it has to persist for at least ten days while a corpus luteum is missing. There are two kinds of cystic ovarian follicles, those who have a progesterone production and those who have not. A clear definition for this condition is lacking, probably because the heterogeneity of the clinical signs and the complexity of the disorder.

The master thesis ?Mechanical Integration of an IR-detector in a Micro Cooler? has beenperformed at FLIR Systems AB in Danderyd. FLIR Systems is a world leader in the design,manufacture and marketing of thermal imaging camera systems.The thesis project is divided into to two areas, Production Method and Noise.The Production Method concerns the positioning of a detector on the cold finger within the IRcamera.The detector has to be positiond with very high accuracy at the center of the cold finger,so it can be placed in line with the optical axis to avoid movement of the picture during zooming.The positioning of the detector is at present done with the help of specially designed guides on aplate on top of the cold finger. The design workes well but the special machining needed for thisplate is very expensive.The goal concerning the production method was to derive a new more cost effective method forthe assembling and positioning of the detector on the cold finger by replacing the guides on theplate with a reusable equipment or some other alignement operation.Several concept ideas have been generated with the help of concept generation methods in theform of concept classification trees and concept combinational tables. Two of these conceptswere selected to be further refined.

Many traffic incidents are due to the driver?s lack of attention, resulting in dangerous lane departures, either sliding off theroad or into the oppose lane. These kinds of incidents often have serious outcomes, which has led to much effort being concentrated on preventing or lessening the damages when the incident is already a fact, for example by installing safety belts and air bags. These measures may be considered to be acts of so-called passive safety. Active safety on the other hand, means that the safety systems intervene before the incidents have occurred.

There have been changes in Earth?s climate system on both global and regional scale since the pre-industrial era and some of these changes are due to human activities such as the combustion of fossil fuels. This calls for the development of engines with a higher efficiency and less harmful emissions. One interesting concept is the Homogeneous Charge Compression Ignition (HCCI) engine, which has the advantages of potentially low emissions combined with high efficiency. However, HCCI with diesel fuel requires a relatively long fuel/air mixing time to ensure a "homogenous" charge.