ABB I-R Waterjet Systems combines the robotics and motion expertise of ABB Flexible Automation with high-pressure intensifier/pumping technology from Ingersoll-Rand to provide and continue to develop innovative waterjet cutting systems for global markets. The purpose of this assignment is to develop a process water purifier. The purifier should be applicable as an option to ABB I-R?s production cell Cutting-Box. At first hand the process water should be purified well enough to let out in the municipal sewage system, but the ultimate solution is purifying the process water to the range that recycling is possible. When investigating the different principle of purifying water, a research of different products and their manufactories was done. These different products were compared and the principle of filtration was the most applicable, as most of the products were designed for far larger applications. As the process water contains quite large amount of particles, it is necessary to perform the filtration in different steps. The process water purifier is therefore composed of a module of coarse filtration and one of micro filtration. In the module of coarse filtration the mainly amount of fibres and particles are eliminated. They are kept back in the container unit with the larger fragments and dumped with these when the container is emptied. In the module of micro filtration the filtration is performed in two steps. In the first step particles larger than 50?m are eliminated, in the second step the micro filter is setting the range of purifying, in this case 10?m.

Examensarbetet gick ut på att stötprova ett system för upphängning av kablar och rör i fartyg. Vid stötprovningen monterades upphängningssystemet i en fixtur. Gruppen fick fria händer att utforma fixturen. Med hjälp av Fredy Olssons teorier om produktframtagning utvecklades en fixtur bestående av fyrkantrör. Genom att värdera och selektera bland de lösningar som presenterades i examensarbetet ?Upphängningssystem? BTH-IMA-EX?2000/C-02-SE och andra nytillkomna likvärdiga lösningar, har gruppen kommit fram till och stötprovat ett system, bestående av aluminiumprofiler och vinklar från Bosch Rexroth.

During the last years, the importance of sourcing in firms has increased. Globalization, fierce competition and an increased level of outsourcing are common explanations to why firms have highlighted the potential to realize savings and the value creation that the Purchasing department can generate. One trend that follows in parallel with globalization is an increased pressure from society on firms to take responsibility for the impact that its products and services have on the environment. This responsibility creates even more attention as outsourcing involves trade with suppliers in low wage countries, where the level of environmental and social responsibility is not always satisfying. The Purchasing department, the firm?s interface with suppliers should therefore, together with the firm?s Environmental department, play a key role in the firm?s contribution towards sustainable development.

Funktionskraven på industrigolv har under senare år ökat. Ett industrigolv skall klara att överföra laster till underlaget samt utgöra ett fast och plant underlag. I denna rapport har två utföranden av påldäck för golv i lagerlokaler jämförts. Den traditionella metoden med armeringsnät har jämförts med en något nyare metod med stålfiberarmerad betong. Jämförelserna har gjorts under förutsättning att golvet skall belastas med 3 ton per kvadratmeter.

Mosquitoes are found in extremely large numbers in the lower parts of the River Dalälven. In the year 2000 the mosquito nuisance was especially high, resulting in foundation of the Biological mosquito control project. Since 2001 mosquito larvae are controlled by using a biological pesticide BTI (Bacillus thuringiensis ssp israelensis). The mosquito fauna in the area is dominated by flood water mosquitoes, a group of mosquitoes that are very aggressive and form new generations of mosquitoes during every single flooding event during the summer. To be able to efficiently control the mosquitoes it is essential to know the extension and locality of the flooding.

Syftet med uppsatsen har varit att undersöka framgångsfaktorer vid införandet av ERP-system i olika företag. Både kundernas och leverantörens syn på framgångsfaktorer vid införandet har klargjorts. Min empiriska undersökning har utförts på fem olika företag och jag har intervjuat totalt fem personer som samtliga haft mycket centrala roller vid ERP-införandena. Vid intervjuerna har jag använt mig av kvalitativ ansats där informanterna har fått berätta relativt fritt om vad de uppfattat kunna påverka framgången med införandet av ERP-systemen. Jag analyserade det insamlade materialet med hjälp av empirinär kvalitativ bearbetning, i form av innehållsanalys.

Trots den senaste tidens hårdvaruutveckling är realtidsrendering av stora folkmassor fortfarande ingen trivial uppgift. Denna uppgift beskrivs som crowd rendering. Effektiv crowd rendering bygger ofta på instansiering, men instansiering kommer med ett problem, det skapar kloner. Denna uppsats syftar till att undersöka och utvärdera ett antal tekniker som används för att skapa mångfald för instansierade modeller. Dessa tekniker kommer tillsammans att kallas varierad instansiering.

During the milling of Sandvik Coromant?s world leading Drill with replaceable inserts,the CoroDrill880©, burrs appear around the milled surfaces. The burrs are removedusing different methods, one of which is deburring with special brushing machines thatare integrated into milling cells. The machines of the type Sinjet, use a Siemensguidance system. The deburring results are not satisfying and manual deburring isrequired afterwards.

The idea for this project was initiated together with one of the leaders in the forest, paper and packaging industry. To get through an A/R CDM process the company is exposed to the risk of failing the process or that the overall costs will exceed the benefits of the project. This would delete the incentives to invest in GHG removals compared to purchasing emission allowances on the carbon market. The questions that have been raised and needs clarification in the thesis are the following:? From a company perspective, what are the incentives for implementing Forest Clean Development Mechanism (CDM) projects?? What is a likely financial outcome of a reforestation CDM project on degraded land in the Guangxi province of the Peoples Republic of China?? When does an investment like this break even with the cost of buying market based carbon emission allowances? The objective of this master thesis is to carry out a research about the incentives for forest, paper and packaging companies to invest in reforestation through the clean development mechanism.

The use of mobile devices has during the last years expanded and on the market you can see a huge amount of applications. The development of mobile applications differs from traditional systems development since mobility infers that mobile applications can be used in different technological and social contexts. Although previous research has recognized that mobility can present mobile application developers with certain challenges, empirical studies of how problems arise and how they can be handled has thus far been limited. In this study we focused on the requirements engineering process from a development view with the purpose of finding challenges emerging in the development process. The study is based on a qualitative case study that employed semi-structured interviews with both project managers and system developers active in the requirements process.

Det finns flera olika sätt att konkurrera med en balpress på marknaden. Ett av dessa är att minska cykeltiden för en komplett pressoperation. Härav formulerades en problemställning som lade grunden för examensarbetet. Problemställningen löd ?Metod och anordning för åstadkommande av stegrande presskraft i balpress, Nättraby Verktyg AB.? Sambandet mellan minskad cykeltid och stegrande presskraft gav lösningen med varierande hastighet på pressplattan. För att lösa problemet valdes en frekvensomriktare som omriktar matningsfrekvensen till elmotorn.

The competition policy in the EU should guarantee that the competition is not distorted in the way that would prevent or create difficulties for the free mobility of goods and services between Member states. It is prohibited for companies to abuse their dominant position according to Article 82, if it affects trade. The essence of Article 82 is control of market power. The perfect competition results when supply and demand appoint the price and quantity of a product. Firms are encouraged to compete then it results in efficiency, quality products and lower prices.

EW26 is a Bachelor thesis carried out by students, Jessica Blomberg, Sara Danielsson and Mikael Johansson, during the academic year 2010-2011 at the Innovation Engineering Program of Halmstad University. The project was conducted in close cooperation with Ergosafe AB.Ergosafe develops, manufactures and sells electric sliding windows. Due to the company?s current expansion phase they want to increase their product range. The company has identified a need for large windows that moves vertically.

In our bachelor thesis we have strived to examine the representation of journalism students in Nicaragua. The freedom of press is much lower compared to Sweden and the journalist profession is protected by a certificate. It is also a high level of corruption within the country. Our investigation concerns who has access to the journalist education and the goal is to compare that with the public in Nicaragua. To be able to examine the representation among the journalism students we have chosen seven different aspects to examine, the sex of the student, witch social class they belong to, their academic background, religion, ethnicity, geographical belonging and political view.

This report is about a thesis that is performed in and for SYSteam Engineering AB in Motala. The thesis work is divided into three parts, study of the market, programming and electronics. The study part consists of examining and comparing different data acquisition systems for testing of different circuit boards, taking into account the modularity, real-time applications, mobility, environmental, interface hardware and software, to be able to define a general module-based data acquisition system in both hardware and software that enables for future developments.The programming part consists of getting started with Visual Studio, which integrates the Measurement Studio for C#. NET. Measurement Studio includes classes and user controls for testing and measuring and offers tools for acquisition, analysis and presentation of real world data.