In two feeding experiments Bacillus induced priming of plant defense was tested for its effect against the generalist insect pest Spodoptera littoralis. The main hypothesis for the study was that Bacillus induced priming would enable the plant Arabidopsis thaliana to defend itself better against this insect herbivore since this priming seems to involve jasmonic acid, known to be important for plant defense to insects. A secondary objective of the study was to examine if any differences in a primed defense capability could be seen between different natural genetic variants (ecotypes) of A. thaliana reflecting habitat differences in pest pressure. The methods used for plant cultivation and Bacillus inoculation were aimed at reflecting conditions that can be expected in an agricultural cropping system. This meant that all plants were cultivated in soil, and the feeding experiments were conducted with the plants growing intact in the soil system.

Retrospective data from two stud farms, in this study named stud farm A and B, including 742 mares, was statistically analysed. Parameters included in the analysis were type of insemination, date of the first insemination, number of inseminations, the age of the mares, if the mares had a foal or not, foaling date, result of pregnancy examination (if it was done), twin pregnancy and treatments given to the mares. The pregnancy results and the treatments where compiled into a number of frequency tables in which the mares where arranged according to age, month of first insemination, foal or not and type of insemination. There was a significant difference in pregnancy result between the years at both stud farms (2001 better than 2002). At stud farm A, in year 2001, month (at start of insemination) significantly influenced the pregnancy result.

How accessible is the city? Is there more factors than merely the strictly physical that affect how accessible the city is perceived? These questions are the starting point of this study. The greatest emphasis, in this study, is placed on the perceived parameters that affect us humans when we move in our cities. Experiences and internal images can change our behaviour and prevent free movement in the city. The result from this study shows that a city can not be seen as fully accessible unless both the physical and the perceived accessibility are fulfilled.

During installation and operation of a geothermal heat pump system leakage of an antifreezing agent can appear in a borehole and leak out in surrounding groundwater. To guarantee high quality drinking water for generations to come Sweden has dedicated some areas as water protection areas. The local authority gives permits for the installation of heat pump systems within water protection areas. Before giving a permit the local authority makes an evaluation of the risks involved in installation and operation of the system within the area. By keeping a certain distance between the protected object in the area and the heat pump system the risk of polluting the protected object with an anti-freezing agent can be reduced.This thesis makes a comparison between three different methods of calculating an appropriate distance between the protected object and the heat pump system.

The modern veterinarian in horse practice is often consulted by horse owners concerning riding problems. These problems are more complex and show other characteristics than traditional lameness. For the diagnostic process and to give adequate advice the veterinarians need an understanding of riding terminology and problems related to riding. It is also of high importance that riders, trainers and veterinarians increase the knowledge of equine biomechanics and how these are influenced by the rider. Collection is an important concept in the riding terminology.

Preservation of cells and tissues by freezing at temperatures below 70°C has led to new possibilities for the storage of germ cells for fertility preservation. During the freezing process problems might occur, the greatest being ice crystallization which can cause membrane destruction and thus cell death. To minimize this risk, solutions that reduce the freezing point can be added to reduce crystallization and increase survival rates. These solutions are called cryoprotectants. The best method for freezing is still not known.The aim of this study was to analyze the effect of various parameters on the survival rate of human semen frozen with liquid nitrogen.

BIM has been a trend in recent years when it comes to design and construction ofnew buildings. However, there has been less talk about what happens to BIM modelsafter the construction phase.This issue has been raised at the Forsmark construction documentation department.This thesis aims to look at how the information in a BIM model can be transferred tofacility management and GIS systems and thus add value, even after the constructionphase.Questions raises how such an exchange might look like and whether it is reliable.How should a claim be brought to planners for such an exchange to work.This thesis tested some of the most common methods for this kind of exchange ofinformation from BIM models to facility management and GIS. It was formats like IFC,Fi2xml and a database connectivity that was analyzed by a computer simulation of amodel provided by Forsmark. The model consisted of an existing office building atForsmark, modeled in Autodesk Revit.The results indicate that the formats tested require a precise plotting of the models.The loss of information that came to light in the simulation could be attributed tofailure modeling in Revit. Even such things as naming of areas must be consistent.

This master thesis was made to validate hydropower models of a turbine governor,Kaplan turbine and a Francis turbine in the power system simulator ARISTO atSvenska Kraftnät. The validation was made in three steps. The first step was to makesure the models was implement correctly in the simulator. The second was tocompare the simulation results from the Kaplan turbine model to data from a realhydropower plant. The comparison was made to see how the models could generatesimulation result that was similar to the reference power station.

The combustion engines in today?s vehicles are getting more and more advanced and there are increasing demands on that the engines should operate during optimal conditions. Examples of internal combustion engine parameters which may be carefully controlled are the rate between fuel and air, that this gas mixture is homogenous enough and that it is ignited at the correct moment. Moreover, the requirements of these parameters vary depending on, among other, engine speed and load. To meet these requirements in all occurring operation conditions, it is required that many subsystems work together.

After emergencies involving chemical spills it is of great importance that correct measures are taken with short notice, both for the security of people and in order to minimize future environmental consequences. The RIB-unit at the Swedish Rescue Services Agency initiated this study, the aim of which is to propose changes to the existing chemical transport calculation tool: Chemical Spill 3.4, included in RIB - Integrated Decision Support for Civil Protection, so that it can be used for decision support as well as in preventive work. A rough estimation of chemical transport in the subsurface is considered being of great importance when making decisions during emergency response operations.The proposition presented in this report is a non site specific chemical transport model which is designed to give a rough estimation of NAPL flow in homogenous isotropic soil shortly after an instantaneous release. The model can be used at two levels; both in situations without access to information on subsurface properties, and with more accuracy in situations with knowledge of the included parameters. For that reason the user can choose among predefined alternatives or assign the parameters a numeric value to increase the quality of the model output.

This report deals with the performance of a batch flow treatment of landfillleachate compared with a continuous flow system. The parameters in focus were total Kjeldahl nitrogen (TKN), BOD5 and COD. The pilot-scale experiment used eight barrels with a volume of 150 liters. Each barrel was constructed differently concerning its flow, its bed material grain size and its presence of plants or not. Four of the barrels worked in batch mode, thus four in continuous flow mode.

This report describes the construction of a climate-cabinet for testing of HV-cards (High Voltage) produced at VG Scienta. The main part of the report describes all the different components of the cabinet. The most important parts are a PID regulator from Eurotherm model 2408, a solid state contactor (SSC), a thermocouple, a finned resistor from DBK and different fans. The report even includes the connection between components by cable wiring, isolation, grounding, fuses and shaping of metal goods.As the cabinet also communicates with a computer, the report includes the solution of the data communication using the software iTools from Eurotherm. The communication part includes information about a converter that converts EIA422 to USB.The cabinet was produced at a company, called VG Scienta, in Uppsala during the spring 2010.

The mining company LKAB extracts iron ore in three areas in the north of Sweden, Kiruna, Malmberget and Svappavaara. The iron ore is refined and in the pelletizing plants the material is rolled to finished pellet product. The different steps of pelletizing plants causes among other things emissions to the air. It occurs occasionally stops in the production and the emissions are vented via an emergency chimney without purification. The aim for this work is to look into how LKAB may improve their monitoring of air emissions and control of ambient air quality and the analysis methods which are suitable for measuring.

Exocrine pancreatic insufficiency is a hereditary disease that in Sweden is especially common in German shepherds. The Swedish German shepherd club has currently no plan of action for decreasing disease prevalence in the breed. The purpose of this study was to review existing literature about the disease and also to perform an inventory of the disease in the Swedish dog population. Special focus was laid on the German shepherd breed. The inventory was later compared to an unpublished inventory of the disease with data from the Swedish University of Agricultural Sciences from 1997. During the period 2002-06-01 to 2007-09-26 (ca 64 months) 2961 blood samples were analyzed for cTLI. 274 samples were positive (cTLI .

This thesis describes redesign and adaption of a products housing. In order to make it more economical to produce at a lower production volume. The thesis is based upon a prototype that a previous student developed for injection moulding. The goal is to find alternative manufacturing methods, but also to identify parameters that affect the cost of the injection moulding tool.The housing must be tough in order to protect the circuit board inside. But at the same time it must allow sound, light an electrical communication to pass through.