The main purpose of a Flight Data Recorder (FDR) is to facilitate the investigation of incidents. In order to interpret the data that has been recorded in the FDR the data has to be visualized in some way. This can be done with software on a computer or with hardware that is specific for the model of aircraft that the data originates from.The aim of this project is to visualize data for six parameters from the FDR of Saab 2000 in an avionics rig. The avionics rig resembles the cockpit of Saab 2000 and the displays in it are identical to the ones found in the plane. All six parameters are shown on the same display.Due to safety regulation vital systems in aircraft are doubled, with one system on the left side and one on the right.

The aim for the project was to develop a risk analyse tool for measuring the fire safety level in Cultural Heritage buildings of Visby, Gotland. In 1995 Visby were taken into the Unesco:s World Heritage List with the explanation ?Visby is an outstanding example of a Northern European walled Hanseatic town which has in a unique way preserved its townscape and its extremely valuable buildings? One of the demands for the tool was that it should be easy to use and result into a ranking level in examined buildings. The user of the tool is recommended to be personnel in the fire department. To develop the tool a Multi Attribute Decision Making (MADM) method was used.

This thesis work resulted in a template for how the thermal spray process can be controlled through robot programs. The robots today and their programs need to be replaced, therefore a new structure which can be matched with the new robot systems is needed. The work is limited to only concern structured programming on the new robots on Thermal Spray Centre (TC) with the programming language Rapid. The basic data for the program was retrieved from interviews with concerned personnel at TC, from studies on process parameters for thermal spray and from existing specifications at Volvo Aero Corporation (VAC). The thesis work briefly describes the process thermal spray and the four methods used at VAC.

The freshwater pearl mussel (Margaritifera margaritifera) is a large freshwater mussel. Because of its sensitivity to human impact, such as eutrophication, acidification and alterations of hydromorphology, the species is considered as a robust indicator of stream water quality and biodiversity. Moreover, due to the species complex life cycle, including a larval stage on the gills of salmon and trout, and sensitivity of early life stages, regeneration is often used as an indicator. The freshwater pearl mussel is also used in the expert judgement of status classification of benthic invertebrates according to the European Water Framework Directive. The purpose of this study was to gain a deeper understanding of the freshwater pearl mussel as an indicator for Swedish streams. It was made with two types of association analyses.

The canine population has during it?s time with humans gone through at least 2 major genetic bottlenecks, the first when it was separated from the wolf, and the second when it was divided into different breeds. Among other things, this has lead to the accumulation of unwanted genes, such as genes causing disease in dogs. One such inherited disease is syringomyelia, which has proven to be more common than expected, especially in certain smaller breeds such as the Cavalier King Charles Spaniel. Syringomyelia in dogs is often a secondary condition caused by the malformation called occipital hypoplasia.

AbstractThe genetic diversity in cultural plants is considered to be threatened due to global climate change and antropogenic influence. Unknowing of future conditions for cultivation, gene banks all over the world are now trying to build up costly safety nets of species and varieties that may become highly valuable owing to their specific traits and genetic heredity. Hence, in 2002 there was a national inventory, aimed at the Swedish public, asking for seeds believed to be lost. Among the resulting collected seeds were some accessions of garden bean, Phaseolus vulgaris. The objective of this particular study was to assemble a collection of unique varieties and discard possible duplicates.

The purpose of this paper is to standardize and simplify the design work on a few specific types of storage brackets for balconies. The company Balco AB had the wish to simplify the design work in the preparation of attachments to their balcony structures. This would be done by a calculation matrix that could be produced which then in turn could be used for each new project by the company. The design work behind the development of these fittings at each new project is costly both in terms of time devoted by each calculation but also the cost of the time. The purpose of this report is that in a systematic manner, a calculation matrix can be created that then the company instead may follow from each new project.In carrying out the project used HILTI calculation program, which was provided by the company HILTI.

The following text constitutes an attempt to present the French philosopher Gilbert Simondon's genetic ontology through an account of his reconfiguration of the problem of individuation in his doctoral thesis from 1958, L'individuation à la lumière des notions de forme, information, potentiel, métastabilité. The intention is to show how Simondon through this reconfiguration of a classical philosophical problem ? in which concepts and schemas from contemporary physics and technology is utilised in a critique of the bi-polar hylomorphic schema as its traditional, substantialistic solution ? becomes able to articulate an anti-substantialistic and anti-reductionistic ontogenesis as first philosophy. A systematic philosophical conception that according to Simondon precedes every critical investigation of the subject as well as every scientific ontology ? not by establishing a pre-critical position, but by exceeding Kant's critical position: that is, through a displacement toward a conception of the transcendental conditions for the genesis of being and thought as real conditions, rather than conditions of mere possibility.

This thesis was carried out at Atlas Copco Tools and Assembly Systems. The purpose hasbeen to develop a design tool to be used for development of new electric motors for AtlasCopcos electric nutrunners. The focus of the thesis has been to increase productivity bydecreasing the power losses in an electric tool. The productivity is defined as themaximum number of tightenings a nutrunner can perform without becoming too hot.Before starting the development of this design tool an existing Matlab script, whichcalculates the losses in a slotless electric motor, has been studied and modified torepresent the real losses in a better way. The modification has been made by performingpractical studies of different losses and then adjusting existing parameters in the Matlabscript.Because design changes in one part of a mechatronic system can lead to a decrease inperformance of another part the choice of parameters that can be changed has been madeso that other parts of the system is affected as little as possible.A study of the existing tools efficiency during an entire tightening has been made toincrease the understanding of when and where the different losses appear and to comparethe modified Matlab script with the measured values.The design tool was formed so that it executes the Matlab script, that calculates thelosses, for a number of different design options and stores the alternative which producesthe least losses.

This thesis describes the redesign ofequipment designed for drying bags thatis used in Fresenius Kabis´manufacturing of their nutritionmedicine in Uppsala. The need of thistask arise during the start of thedevelopment of a new packaging line werethis equipment were meant to be used. Anevaluation of the bagdryers capacity andcapability was necessary.The work started with gathering ofinformation from suppliers of the usedcomponents and from the responsibleengineers for this equipment. Aneducation to learn how the equipmentworked and how to operate it were taken.That was followed by the creation of astudy plan were the tests were plannedto test different parameters effect onthe drying result and to see if thebagdryer managed to handle the bags ofthe correct format in the pace that theequipment should be designed for.The test results detected a need ofdesigning a unit with a function thatholds the bags in place while passingthrough the dryer in order to attainhigh quality results. The results werelater used for optimization of thedesign.

When stormwater occurs near human activity the water gets polluted. The purity and composition vary widely depending on the types of activities in the area, the type of surface the water comes in contact with, precipitation and many more parameters. It has long been known that stormwater quality can affect both human health and the environment as stormwater is a major contributor to pollution of receiving waters.A human activity that has an impact on the environment in several different ways is traffic and stormwater is no exception. Airborne gases that react with precipitation, oil leaks and fuel systems that drops down on the ground, metals from brake linings and rubber particles from tire wear are some of the aspects you have to take into account when categorizing the relationship between traffic and polluted stormwater.In this project, stormwater samples from a parking lot in Halmstad, Sweden were collected and analyzed with an atomic spectrophotometer. The presence and relationship between copper, cadmium and zinc with different rainfall parameters have been studied.

Objective: The aim of this paper is to see if there are higher restructuring expenses under the item provision for the first year when a new president takes office.Method: The study was done by a quantitative study. Financial statements have been examined for companies listed on the OMX Stockholm Stock Exchange, Large Cap. We have examined all the companies? annual reports between the years 2002-2008. We have looked at the experience of restructuring and other expenses that occur in the context of CEO change.

The aim of this study was to evaluate the effects on a simulated wastewater plant regarding GHG emissions and use of energy and resources when implementing source separated wastewater systems. The effects were studied for different restrictions of effluent quality and for different temperatures on the influent. The simulation model BSM2G calibrated for Käppala wastewater treatment plant was used. The task was executed by simulating nine different scenarios with an increase in influent load from new connections equivalent to 3, 10 and 30 % of the present connections. These new connections were served by conventional, urine separated or black water separated systems.

Risk-based sampling program of microorganisms in the water source in northern SwedenAfter several disease outbreaks caused by parasites in the drinking water during the last years, it is more essential than ever to insure that the water supply companies have enough barriers to counteract the presence of microorganisms in the outgoing water. It is also discussed whether climate changes such as increased precipitation can have a connection to the increased cases of parasites in water sources. The water source at Gäddvik is Luleå municipality?s largest and provides drinking water to 64 500 of Luleå?s 74 000 inhabitants. The investigation of microorganisms in the water source, especially in the Lule River has not been as prioritized as the sampling of chemical parameters.

Emerging infectious diseases poses a great future threat, not only to humans but also to domestic animals and wildlife. Even though the majority of these infections only cause minor health problems, the relatively recent emergence of HIV clearly illustrates that the next major human pandemic may surface at any time. Regardless of what the name indicates, most emerging human pathogens are not believed to be recently evolved, but to have existed previously in the natural environment. Most emerging pathogens are zoonotic, i.e. able to infect animals besides humans.