The most important conclusion of this study is that the negotiations between the parties ends when conflicts arise from property owners, and with this the time will be extended and be more costly. During the study it has been shown that good communication is the key to an effective and successful negotiation between the parties.The purpose of this study is to investigate how the practical procedure under expropriation is in relation to the legal text, in other words, describe and analyze the procedure for expropriation under current rules but also to explain how it operated in practice. This is to get a picture of how the process works and what effects it receives.Three methods were used for the study. A literature review for understanding how expropriation relates according to the law. A case study from an ongoing expropriation in Sundsvall municipality, and an interview with seven affected interested parties from the expropriation.Reviewed literature describes how the application of the Expropriation Act must go to as well as other research on the topic.

The aim of this thesis is to examine the flow of information in an administration of the municipality Borås Stad. To achieve the aim the following questions were asked: How accessible is information? How is information used in the organisation? How is information communicated? Totally sixteen qualitative interviews was accomplished with employees at the administration. The results of the interviews show that there is a difference in how much and what sort of information the respondents use. They all seem to prefer information to be communicated face to face if possible or over the phone.

From the customer?s perspective the only reason for a firm to exist is the value it creates. However, a problem within manufacturing companies is that of the total lead time, only a small part can be considered as value adding. It has further been discovered that when working with improvements businesses often sub-optimizes single processes instead of considering what benefits the entire company. Thus, when improving processes and activities it is important to have knowledge about and understand which factors that affect how the flow can be designed.Several studies have been performed with a wide perspective on process flows in order to obtain a more resource-efficient and value added flow.

This master?s thesis investigates in which ways students seek out and access their textbooks and how they use their university?s library in this process. Data is collected through interviews from six students several semesters into their studies at the University of Stockholm. For the interviews two students each were selected from the fields of law, economics and humanities. The empirical findings were analyzed using T.D Wilson?s model of information behavior (1997).

Today's global market means that raw materials are sought and bought from all over the world. This creates an higher demand for a well-functioning supply chain. In our thesis we have studied a large paper mill in northen Sweden which experiences issues with flow of raw material. Our aim has hence been to examine which aspects affect the flow of raw materials to the mill, and how these can be adressed using an IT-system. The question we sought to answer was; What factors are important to consider and how do these affect the ability of an IT-system which will support the flow of raw material at the paper mill? We have found that the problems are strongly connected to the low amount of information sharing between the mill and the suppliers.

In a global economy it is important to understand what project management is and how it functions in a contemporary company. This report includes an empirical case study of a project flow, which was conducted in the department Packaging Concept (PC) which is a part of Stora Enso. As all of PC´s customer enquiries are unique and must be considered an individual project, PC continuously works in projects. An analysis of the project flow was conducted based on interviews at and visits to PC as well as relevant documents distributed by the department. The report gives an understanding and analysis of how PC works in projects.

The effects of the deregulation of the electricity market 1996 in Sweden on short-term hydropower regulation are unknown. This report investigates patterns in subdaily regulation in the Ångerman River Basin during the period 1993-2011. Differences in subdaily flows and zero flow events between the periods 1993-1995 and 1996-2011 were studied by analyzing hourly data from 8 regulated and 8 unregulated locations with four subdaily flow variation indices. No correlations between the market deregulation and the regulation intensity in the Ångerman River basin were detected. The number of days natural ranges of variability were exceeded and the magnitude of subdaily variation were significantly higher at regulated locations.

This master thesis was carried out at ELFA, one of the largest catalogue distributors of electronics in northern Europe. ELFA offers a wide selection of products such as measuring instruments, fuses and screwdrivers. The master thesis handles the possibilities of an increase in the internal flow of products. The background to this problem is ELFA?s acquisition of two new companies, which brought the product range in the warehouse from 55 000 to 80 000 products.

The purpose of this study was to examine whether an inventory of the vegetation overgrowth could be used to indicate a locally nutritional impact. The study was conducted at Märstaån where the water runs through a number of agricultural lands that could lead to an increased amount of diffuse emissions of nutrients. The vegetation overgrowth in the water was also studied in relation to shade, meandering and water flow effects on the vegetation. With this method, no definitive conclusions could be drawn.Where the water was shaded, no vegetation overgrowth could be found. Therefor trees should be planted to prevent any future overgrowths.

I denna studie är syftet att belysa vilka effekter som underhållningsspel kan ha på motivation och koncentration samt även undersöka om spel kan användas för att förbättra den kognitiva prestationen. Konkret ställs frågan vilka förändringar som sker i reaktion, korttidsminne och perception efter att ha spelat Gradius 3 samt vilka orsaker som ligger bakom dessa förändringar. Resultatet pekar entydigt mot att spelandet har en positiv effekt och förbättrar den kognitiva förmågan. Särskilt när det går bra i spelet och man får ett flow kan prestationen maximeras, vilket överensstämmer med Csíkszentmihályis flowteori. Det flow som uppstår i spelet ger en euforisk känsla av tillfredsställelse som stimulerar motivation och koncentration, vilka båda är förutsättningar för bättre prestation.

Bakgrund: ADA:s Nutritionsbehandlingsprocess (NCPM) är en modell som beskriver dietistens arbetsprocess ? nutritionsbehandlingsprocessen. Den har utarbetats av ADA (the American Dietetic Association) i syfte att effektivisera och evidensbasera dietistens arbetsprocess för att på så sätt höja dietistyrkets status, stimulera forskningsinsatser inom nutritionsområdet och säkerställa effekten och patientnyttan av den kliniska dietistens arbete. Föreliggande arbete ingår som ett led i implementeringen av ADA:s Nutritionsbehandlingsprocess (NCPM) vid ett svenskt universitetssjukhus.Syfte: Att ta fram ett journalgranskningsinstrument för granskning av dietistjournaler, samt att med detta instrument kartlägga nutritionsbehandlingsprocessen vid sjukhusets dietistklinik och hur denna journalfördes innan ADA:s Nutritionsbehandlingsprocess implementerades.Metod och material: Ett journalgranskningsinstrument med tillhörande granskningsanvisningar utformades med utgångspunkt från de fyra stegen i ADA:s Nutritionsbehandlingsprocess. Frågorna validerades och inter- respektive intrabedömarreliabilitetstestades.

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

Increased competition in the IT industry has sparked a need for developing faster innovation processes with more predictable output. One of the biggest issues when it comes to achieving a faster flow through the innovation process lies in managing its high degree of variation. Proposing a solution to this problem, Lean Software Development (LSD), was developed to provide a framework for how IT companies should organize its software development process to achieve increased speed and quality. This study examines to which extent LSD, as a set of values, principles, methods and tools, can be used to improve flow efficiency in the innovation process. A case study of a multinational IT company was made by conducting ten semi-structured interviews with current employees.

AbstractEmbla 5 is an office building which has done a large improvement. The clients of this building has made an order of WSP and the student Anders Kempe to calculate the use of energy for the building, and after that result proposing further measures which can decrease the energy use of Embla 5.The ground for this report is when calculation of the present energy use of the building is stated. To make that information of a number of parameters such as envelope, the heating system and ventilation has been located and set in to the simulation program IDA ICE which calculate the energy use.To improve the energy use further this project has been concentrated to change the system of ventilation. Today the ventilation system is of the kind CAV (constant air volume) and the air flow is dimensioned for after recommendations from BBR and Arbetsmiljöverket in the office spaces. Consider that Embla 5  is an office building where the people only staying for 8-10 hours/day so was the ide to see how much energy saving if the air flow is reduced the time people not being in the building.

The content of the following report is the summarized result of three students thesis at Blekinge Institute of Technology in co-operation with Water Jet Sweden AB. This report will give the reader a description of principles how to measure the abrasive mass flow in a waterjet cutting system. The work began with a visit to Water Jet Sweden AB to get a closer look at the problem. When the analysis of the problem was done the criteria were defined in the form of demands and desires. The main task of the criteria was to guide the search for the solution.