Since 2004, wind power has had the largest installation of new capacity compared to other energy sources in Sweden. Accommodating new wind power may require strengthening or rebuilding of the existing grid in areas where the grid is already loaded to maximum capacity. This master thesis examine the possibility of a new 400/130 kV substation in Yttermalung, Sweden, with a connection to the two neighboring regional grids in Dalarna and Värmland owned by Fortum. This substation would provide a new connection point to the Swedish transmission system as well as an interconnection of the two, currently separated, regional grids. Different expansion scenarios where a substation with and without series compensation or a phase shifting transformer (PST) to control active power flow were studied.

Today?s system to measure the volume in a tank consists of a vertically placed sensor. When a vehicle is tilted the level of the fluid might change and if the volume is calculated based only on the information from the sensor it could result in a incorrect value.This thesis exams a new method to calculate the volume in tanks by using sensor fusion to crosscheck the i formation from the level sensors when the vehicle is tilted. The information is then used to see if it is possible to identify the grade of tilt by the change of fluid level. If the grade of tilt can be measured then the volume can be calculated in a more accurate way.

In the year of 2009 the conditions for managing primary healthcare in the region of Västra Götalandchanged. The decision was taken by the regional assembly and resulted in that the citizens since thenhave had the opportunity to choose which health care provider they preferto stay with. Along with thisdecision a new market for private health careproviders was established, which resulted inincreasedcompetition between the providers.In order to manage the competition, the health care providers arenow forced to be more efficient in their operations andalso to beeven more focused on their patients.Backa Läkarhusgruppen is an example of a private healthcare provider in the region of Västra Götaland.In the same way it is also an example of anorganizationin need of analysing their operations to seehowit can be further optimized to meet patient needs and expectations.The aim of this study is to analyse Backa Läkarhusgruppen?s organization and its operationsin the hopeoffinding suggestions whichwill improve the patient flow.To allocate and solve the problems thatBacka Läkarhus suffer from,an approach inspired by Lean Healthcare is used throughout the report.Some of themost significant problems that were identified within the organization are:?The synchronization of demand and capacity is inadequate.?Absence of standardized routines.?Absence of present leadership.To be able to improve the patient flow Backa Läkarhus needs to handle these identified problem areas.By synchronizing the staffing level in relation to the trends in demand a reduction in the patient?swaiting times and throughput time will be possible. Creating clear responsibilities and routines for thestaff will contribute to a higher degree of patient focus and thus lead to a more efficient patient flow.

In the last decades, lean production has proven to be one of the most important organizational paradigms in manufacturing. The lean concept has also spread into the service industry where it is applied within a range of different areas. The wide applicability of lean principles has spurred the authors of this study to apply the principles in the context of the operations of a Swedish remand prison. The thesis examines the process a client of the remand prison Häktet Kronoberg goes through from the time of arrest until he/she is released or convicted and transferred to jail. Based on lean tools and principles, the thesis maps and analyses this process.

In this diploma work the approach of determining the required amount of reinforcement in slabs exposed to pure tension is processed, on behalf of Ramböll Uppsala. It is a well-known problem in the industry that there are uncertainties in the determining of the amount of crack reinforcement, especially for structures exposed to pure tension. Cracking caused during the time of dehydration in concrete slabs is the most common defect according to statistics made by CBI[1], which provides numbers as high as 35 % of all the defects caused on slabs are generated by cracks. Comparisons between Sweden's former national standard BBK 04, Building Regulations for concrete structures due to restrained forces of shrinkage, and the current European standard Eurocode 2 are carried out through theoretical studies and concludes with several examples of calculations. Rigorous calculations of both standards, BBK 04 and Eurocode 2 with application of the national annex in Sweden and Denmark are performed.

This master thesis was a continuation of a previous study in the diesel exhaust characterization, which is part of the academical work embedded in the EMIR-1 project. The main objective of this thesis work was to finish the installation and make the proper modifications of the particulate mass measuring system located in one of the engine test cells at KTH, in order to be able to measure the mass of the particles from the exhaust of diesel engines.This experiment requires a diluted flow sample from the exhaust that should be sent to the device that makes possible the measurement of particle mass, called TEOM. In the first stage of this project, the objective was to study and make the proper modifications in the existing KTH diluter because there were several problems to obtain a constant dilution ratio from it during tests.This modifications were made and it resulted in a great improvement in the maximum inlet and outlet flow that this diluter can handle. Therefore another modification is proposed for controlling the inlet exhaust flow so it will be possible to regulate the dilution ratio and make it constant along a wide range of engine loads and speeds.The second and most important stage was to make particulate mass measurements possible by analyzing the frequency signal from the TEOM device. The idea was to obtain the frequency of oscillation from the tapered element in the TEOM, and therefore with the proper correlations, be able to predict the particulate mass concentration in the exhaust flow from the engine.An electrical problem in the TEOM circuit was detected and corrected, so the signal that carries the frequency from the TEOM can be analyzed properly.

Together with NCC and Sweco we measured the air-flow on a semi-detached house in Jönköping. When a pressure measurement is made, the house gets exposed to over- and under pressure. This is done in order to examine the houses climate shell. The climate shell of the semi-detached house we tested exceeded the required air thickness in BBR-2002, hence, measures have to be taken.This report also displays the importance of building air thick houses and what consequences a non air-thick house can have for the ones residing the house. A discussion of different measures is on for the addressed problems with the flow-measurement and the alternative construction-solutions.Furthermore we have described in this report of how to account for the performance of the air pressure, what kind of equipment we used and how we came up with the results.

 This study was conducted in autumn 2008 on the Company AB, which is currently in a growth phase. The company manufactures hydraulic systems for the heavy vehicle industry and has annual sales of approximately 250 MSEK with 165 employees.The rapid growth and unchanged planning is the starting point for this report. It all began in 2005 when the company received an unusually large order. During this period, the first priority was to satisfy customers and all other focus was disregarded. This has primarily resulted in a messy production and long throughput times.

Syftet med denna uppsats är att utreda vilka faktorer som påverkar de svenska småhuspriserna, och i så fall hur och i vilken utsträckning. Med stöd av tidigare studier som enhetlig pekar ut bolåneräntan och disponibel inkomst som de faktorer vilka har tydligast inverkan på fastighetspriserna i Sverige, utökas de förklarande variablerna i denna studie med hjälp av en stock-flow modell. Tidsseriedata från 1993-2013 behandlas för enhetsrötter och kointegration för att skattas i en regressionsanalys i form en "Error Correction Model", med avsikten att utreda både ett kort- och långsiktigt samband. Resultatet bekräftar reporäntan och disponibel inkomst som två viktiga faktorer för att förklara det långsiktiga sambandet med priserna på småhus i Sverige, tillsammans med ytterligare faktorer såsom BNP, hushållens skuldsättning och arbetslösheten. På kort sikt är dels den historiska utvecklingen av huspriserna en nyckelfaktor, men faktorer som disponibel inkomst, ränta, BNP och hushållens skuldsättning är också viktiga krafter för att förklara småhuspriserna.

Handling product returns has become a critical activity for organizations as the volume of gods flowing back through the supply chain rapidly increases. Few research studies have published specific empirical data concerning the reverse logistics practices of companies. Information technology and information support has long been recognized as a competitive weapon ? capable of enhancing company performance and achieving efficient reverse logistics. Reverse logistics is very unlike the forward, as it is more reactive and also has less visibility.

Syftet med studien var att ta reda på hur gymnasieungdomar upplever utomhuspedagogiska moment i undervisningen. Det är en kvalitativ undersökning gjord vid Bernadottegymnasiet i Stockholm. Studien baseras på deltagande observationer under drygt två fältdygn och på semi-strukturerade intervjufrågor med tolv elever, i tre fokusgrupper. Resultatet visar att elever upplever utomhuspedagogiska undervisningsmoment positivt.

The purpose of this essay is to describe how Boverkets Byggregler has affected the cost ofnewly built houses from 2003 to 2012, to Boverkets Vision 2025. The purpose is also to findagent-principal relations in the construction sector.When investing in an energy efficient house the operating costs are reduced compared to aconventional house. But due to the lower operating costs, the investment cost rises. In thisstudy, we find out if it is economically viable to invest in an energy efficient house comparedto a conventional house from the customer's perspective.The study's approach has been qualitatively where we in collaboration with Derome Hus hadaccess to three conventional reference houses and a passive house and data that was necessaryto conduct viability assessments on houses. We conducted five interviews with people fromDeromekoncernen and Varbergs kommun.The calculation methods we have used in this study are present value method, annuity methodand a sensitivity analysis.

In this project forging of aluminum alloy Al 6026 T9 has been performed in the temperature range of 400 °C ? 470 °C. The alloy which was in the shape of a cylindrical billet was formed in a press with the aim of analyzing the effect of different forging temperatures and required press load for optimal die filling. The component?s dimensions were later measured and compared to a reference piece.

Studien undersöker känslomässiga reaktioner vid kooperativt spelande, vilka som är gemensamma för båda spelarna och hur de påverkas av hur svårt spelet är. Arbetet utgick från studier av spelares emotionella reaktioner på spel och teorierna om Flow. Spelet Sanctum användes i en serie tester där mätningar utfördes på två spelare med hjälp av rapportformulär, pulsmätare och hjärna-till-datorgränssnittet Emotiv EPOC. Studien fann att spelarna ibland upplevde samma känslor när de spelade tillsammans och att den ökade svårighetsgradens huvudsakliga effekt var att förändringarna i känslorna blev skarpare och större. Det tycktes huvudsakligen vara motgångar som splittrade spelarnas upplevelser.

Problems arise when the number of products in stock does not correspond with the number of products the information system says the company has in stock. (Sharda & Agrawal, 2012) In order to change that, major changes has to be made when it comes to making continuous improvements and to raise their standards regarding product availability and record inaccuracy (Wild, 2004).The purpose of this study is therefore designed to identify factors affecting the balance differences and what impact it has on the efficiency of material flow. The demarcation of the work is that Atlas Copco has begun working with Lean and it will not be investigated nor the relationship between balance differences and Lean. The study was based on answering the following questions: What influencing factors can be identified for balance differences? What factors are relevant to the efficiency of material flow? What kind of impact the balance differences has on these factors?In order to answer the purpose and issues, a theoretical framework has been developed with help of literature studies and an analytical model.