Consumers today leave a fragment of information when they pay with their debit and credit cards. The aim of our work is to investigate ways to design a concept of a system in which digitally stored information that today is fragmented among several different holders, can be assembled into a system and made available to consumers. In our study of how a system for financial flow of information should be designed, we intend to study the present situation and the attempts made to alter it into a more informative reality. We intend to investigate the flow of information when a consumer pays by card, and the possible solutions regarding the design and transportation of digital receipts. A majority of the information of our digital consumption is today handled digitally.

Background:Life-cycle costing (LCC) is an investment calculation that takes intoaccount operating costs throughout the investee lifecycle. LCC calculations are mainly usedto evaluate investments that have no revenue side. Attempts to apply the LCC calculations forbuilding-related investments have occurred since the 1980s. Despite the advantages ofusing LCC calculations, use has not passed through in full. The main obstacles have beenidentified as a lack of relevant input data, and insufficient experience of workingwith LCC calculations.

An information audit identifies, among other things, organizations information resources, the information flow and the needs of the information users. The purpose of this masters thesis was to describe the management of information within a local unit of Borås municipality by putting an information audit-method in practice. The focus was on three issues: What information needs could be seen in the organization? How does the information flow through the organization? How does Sugan Henczels seven-stage model serve as a tool to map the management of information within the local unit? The study only described the situation at a certain time at the chosen organization. The seven-stage information audit model was revised and adjusted to the studied organization by only carrying out four of the seven steps: Planning, Data collection, Data analysis and Data evaluation.

Syftet med denna studie var att undersöka unga idrottares upplevelser i en topprestation.Studiens frågeställningar var:·        Vilka upplevelser har unga idrottare i en topprestation?·        Upplever unga idrottare flow i en topprestation?·        Vilka faktorer ligger bakom en topprestation hos unga idrottare? Utifrån syfte och frågeställningar valdes mätinstrumentet Flow State Scale-2 (FSS-2). FSS-2 består av ett påståendeformulär som mäter den totala upplevelsen av flow samt var och en av de nio dimensionerna av flow.Kontakt togs via telefon och mail med ansvariga tränare vid idrottsgymnasier för att finna unga idrottare med ett tydligt minne av en topprestation. Undersökningsgruppen blev 51 stycken unga idrottare, män och kvinnor i åldrarna16-20 år som utövat fotboll, ishockey eller orientering på elitnivå.Litteratursökning gjordes i bibliotekskatalogen tillhörande Umeå Universitet. Den funna relevanta litteraturen och artiklarna har legat till grund för denna studies bakgrundsdel. Påståendeformuläret FSS-2 visar att undersökningspersonerna, i sin topprestation, hade en stark upplevelse av inre tillfredsställelse, tydliga mål, koncentration på uppgiften, känsla av kontroll och balans mellan skicklighet och utmaning.

Throughout this thesis three main factors have been identified that can be out of significance for transfer pricing in multinational companies if the proposal for Home State Taxation is adopted. These factors are rules for calculation of the tax base, rules for dividing costs over periods and the tax rate. The formula for sharing profits will also become a factor that can have an impact on the European companies'incentives for transfer pricing interacting with above-mentioned factors. The effects of transfer pricing aiming at reducing the total amount of the taxation burden for a group of companies will be strongly reduced in the future if the proposal is adopted. Incentives for transfer pricing will loose importance, though not disappear altogether.

Findus Sverige AB, referred to asFindus from now on, harvests peas during a period ofaround 50 days during the summer. The harvest generates about 30 000 tonnes of peas which gives around 40 000 pallets to distribute to the warehouses which Findus uses for final storage. Three hours after the peas are picked in the fields, they have to be frozen to keep their good taste and quality. Because of this the pallets are marked with a preliminary label with quality classification of the content. The Findus quality department then has one day to determine the correct quality of each pallet.

In the digitized world many organizations experience a large flow of information. To sort and manage all the information can be difficult. Individuals may experience a phenomenon called ?Information Overload?, due to the fact that the information flow is too extensive. There are various reasons why individuals are affected by this phenomenon.

This essay is a case study carried out at Flow Systems Ltd that foremost aims to treat the internal marketing at the company. The aim with the essay is to analyze and evaluate Flows internal marketing in connection with a process of change and how this reflects the external marketing in relation to customers.The method that has been used is qualitative in the form of depth interviews carried out with management, employees and customers. This type of data was chosen since it is a good way of gathering more specific information regarding the informants preferences about the company. Among other things the results of the interviews showed internal marketing deficiencies, but that has not influenced the customers in a negative way. The conclusion was that the inferior internal marketing does not affect the cooperation and the communication between the company and its customers, however it has a big effect on the employees..

KSL Trading Inc is a trading company in the Jönkoping area that distributesmaterial for the furniture and interior design industry.The purpose of this report is to analyze the existing material flow andwarehouse layout as well as to identify the issues there are today at KSL?swarehouse for board material. When we identified what kind of problems thatexisted we were able to design a new plan for the material flow and storagepossibilities. The problems we found where:? There is no well-organised warehouse layout? There are no routines to keep the warehouse clean and in order? There is no formed plan how to handle materialTo solve these problems we have used different methods like interviews,observations, calculations and literature studies.

Treatment wetlands been showed efficient for reducing pollutant in waste water. In Lajeado ? RS, Brazil the landfill has poor leachate water treatment. It is necessary to supplement the treatment plant because they need to reduce BOD, COD and nitrate of the water going to recipient. A subsurface flow wetland (SSF) can be a good choice.  In order to be able to design an efficient SSF it is important to understand how the grain sizes of a substrate affect the reducing of pollutants in waste water.

Den allt hårdare konkurrensen på marknaden gör att det blir alltviktigare för mindre tjänsteföretag att utvärdera sitt val avproduktkalkyl.Syftet med denna uppsats är att undersöka El- Företaget AB:sproduktkalkylering samt ge förslag till eventuella förbättringar genomatt jämföra med befintliga och lämpliga produktkalkyler.Resultatet i denna undersökning visar att påläggskalkylen är den mestlämpade kalkylmetoden för El- Företaget AB. Företaget använder sig avdenna modell idag men i slutsatsen har vi konstaterat att det krävsförbättringar. Dessa förändringar bör genomföras för att företaget iframtiden ska kunna jämföra och kontrollera sina kostnader på ettbättre sätt.Because of the competition on the current service market it is moreimportant to minor service companies to evaluate there choice ofproduct calculation.The purpose is to examine El- Företaget Ab:s product calculation andsuggest possible improvements by comparing with existing andappropriate product calculating- methods.The result in this survey shows that absorption costing method is themost suitable one to use by El- Företaget AB. The company uses thismodel today but through the conclusion we have worked outimprovements. These changes will be made to compare and controltheir cost in a better way in the future..

The purpose of this essay is to describe how Boverkets Byggregler has affected the cost ofnewly built houses from 2003 to 2012, to Boverkets Vision 2025. The purpose is also to findagent-principal relations in the construction sector.When investing in an energy efficient house the operating costs are reduced compared to aconventional house. But due to the lower operating costs, the investment cost rises. In thisstudy, we find out if it is economically viable to invest in an energy efficient house comparedto a conventional house from the customer's perspective.The study's approach has been qualitatively where we in collaboration with Derome Hus hadaccess to three conventional reference houses and a passive house and data that was necessaryto conduct viability assessments on houses. We conducted five interviews with people fromDeromekoncernen and Varbergs kommun.The calculation methods we have used in this study are present value method, annuity methodand a sensitivity analysis.

We have left the industrial society, and instead, we live in a post-industrial knowledge and information society. It is often said that industrial production has disappeared or that it has changed greatly. This means that fewer are employed in the manufacturing sector while the service sector is increasing, resulting in that the boundaries between production and administration decreases. The production goes from mass production to more flexible and specialized solutions. This puts greater demands on the logistics chain that continually need to work to meet customer requirements.

In this diploma work the approach of determining the required amount of reinforcement in slabs exposed to pure tension is processed, on behalf of Ramböll Uppsala. It is a well-known problem in the industry that there are uncertainties in the determining of the amount of crack reinforcement, especially for structures exposed to pure tension. Cracking caused during the time of dehydration in concrete slabs is the most common defect according to statistics made by CBI[1], which provides numbers as high as 35 % of all the defects caused on slabs are generated by cracks. Comparisons between Sweden's former national standard BBK 04, Building Regulations for concrete structures due to restrained forces of shrinkage, and the current European standard Eurocode 2 are carried out through theoretical studies and concludes with several examples of calculations. Rigorous calculations of both standards, BBK 04 and Eurocode 2 with application of the national annex in Sweden and Denmark are performed.

The objective of this thesis is to map the resources and methods used at the department OPPC, at AstraZeneca, and derived from that give suggestions on possible solutions that will increase their productivity.Mapping of the product flow, as well as gathering of process data, has mainly been done using observations, but consultation with the process technicians has also played a great role. Further have theoretical methods been used, based on literature studies, within the areas of Lean production and statistics.The work has incrementally gone forward since the steps taken has been restricted by the irregularity of production which led to the need of creating a fictive production flow. This has affected the lead-time calculations in the way that they are meant to give an indication, rather than an absolute truth, on how different methods described shall be used.The current state analysis showed multiple areas of improvement when defining capacity as value adding time in relation to total throughput time. Using the "standard scenario" as a basis showed that the actual production flow only constituted 50% of the total project time. Further it showed that the workflow contained more non-value adding activities than value adding activities, which is a result of how the work is distributed within the department as well as in the different projects.