This master?s thesis was written on the behalf of Saba Frukt och Grönt AB inHelsingborg and is the final part of the Master program in MechanicalEngineering at Halmstad University.The main task was to introduce visual control and increase the rate of concept intwo of the departments of the company. The goal is to come up withimplementation proposals, and if possible to implement one in the near future.The author attacks the problem by using the Six Sigma DMAIC-methodology as itis a clear and structured approach. As a complement Lean-inspired tools are used.After compiling the results from the interviews and benchmarking somesuggestions are made. These are reviewed with stakeholders and a discussion ofhow to go on further was held.

The purpose of this study is to describe and analyze a group of participants (social workers, contact families and the young adults who had been given a contact family as children) and monitor their experience of the intervention contact family and its goals, contents and design. We also wanted to look into what goals and guidelines are available regarding the interventions design and contents. We also looked into parts of the intervention which the participants found most useful for them individually. The method we used in our study was qualitative interviews. We compared and analyzed our results to research made on the subject and the theoretical frame.

This is a report about accessibility. For this project the accessibility of a building in the city of Halmstad was evaluated. It´s a three storey building with five apartments on each floor divided by two stairwells. These five apartments have since been divided into three different types of apartments. Each type of apartment has been assessed separately.

In this essay, we have compared a conventional house to a passive house. The housesshared the same local conditions; they have the same living area and the same layout. Thedifferences between the houses were the different construction solutions for the roof, theouter walls, the floor and the heating system. Both the houses qualify the standards fromBBR and the passive house also lives up to FEBY?s special conditions.The purpose with the essay was to examine if it really is profitable to build small hoses aspassive houses.

The purpose of this litterature review is to illustrate the nursing care to patient with chronic pain. As a theoretic frame for this study we choose Aron Antonowsky. The results of this study are based on 8 scientific articles. The findings are presented in main categories and ideas. The findings show that chronic pain is a multidimensional phenomenon that influences peoples quality of life in a physical, psychological as well as social way.

Body awareness is a term that refers to a person´s perception and knowledge about his or her body. It includes proportion, size, weight, contour and image of ones body. The Ben- Tovim Walker Body Attitudes Questionnaire (BAQ) contains 44 questions concerning the different aspects of body awareness: Feeling fat, Body disparagement, Strength and fitness, Salience of weight, Attractiveness and Lower body fatness. The purpose of this study was to investigate body awareness among men in military recruit training. BAQ was distributed to fifty recruits for military service in Boden.

This report presents a thesis project at the School of Engineering, Jo?nko?pingUniversity, where the task has been to develop a proposal for a parish communitycentre for the Swedish church?s parish community in Bankeryd.Background1 st of November in 2004 the parish in Bankeryd appointed a special commissionof inquiry called Framtidsgruppen (Future Group), to analyse the parishcommunity?s different activities during the past 5 years and analyse the futureactivities and needs for the upcoming 5-10 years. This analysis would underlie theneeds of building a new centre for the parish community.Implementation, results and conclusionThe main focal points which this report is concentrated on has been to develop abuilding that is well suited for the activities, well adjusted for disabled persons andthe building shall be appealing in an architectural point of view.Based on the information provided from the parish community, studies ofliterature, reference objects and discussions with the contact person at the parishcommunity and the instructor of this project, the programming has beendeveloped. The building?s programming has been the source for the continuedwork with floor plans and the building design..

The leadership within healthcare is a constantly discussed subject. The discussion today is evolving around the physicians' lack of strive towards becoming managers within healthcare organizations. Furthermore the leadership that the nurse practice when becoming manager is on the other hand not discussed. The purpose of this study is to describe important factors of the leadership the nurse practice upon physicians in a healthcare organization as well as to explain why that is. To fulfill this purpose, we have used a qualitative case study research design including a private Swedish healthcare company.

This essay discusses joist floor, and the land-building at these structures. In Malmoe there is a neighborhood called Trumman that has a courtyard where an underground garage is located. What possibilities are there in this place and how would an alternative design look? These issues will this essay answer. In the result part it is both described how the joist in Trumman looks and how it is built correctly.

This study examines the similarities and differences between four guitar teachers in Sweden and the U.S. The aim of the study is to examine how teachers motivate their pedagogical standpoints and to analyze how they experience the frame factors that limit their teaching. Data were collected through interviews with two Swedish teachers and two American teachers. The result shows that the teachers, despite their seemingly different contexts, actually have a lot of common strategies and approaches. Most significant is the tendency to let the students decide some of the content of the lessons.

This report aims to study the condominium prices in central Stockholm and the factors thataffect these prices. A linear regression model was set up and data about relevant covariatessuch as floor area, mortgage rates and where the condominium is situated were gathered toassess if and how they influence the price. The raw data was processed and enhanced to gain asmuch relevant information as possible to the model. To determine the covariates? influence onthe final price, regressions were ran and various tests were performed on the output data.

This diploma work project is a product development project which purpose is to redesign a braking system for a walking frame. The system that was developed diverges the force from the user to braking power, and includes a service brake as well as a parking brake. The most important components of the system are a grip handle on where the user holds on to and a braking handle on which the user operates the brake from. The system also includes a power transmission component, braking package and other mechanical components. All of the components wasn?t developed in this project, several off them has been reused from the existing system.This product has been developed to meet the requirements and standards presented from the principal, Ahlberg Leber.

This research analyzed differences in measurements of magnetic field strength and frequency response in five audio induction loops installed in rooms of wooden construction materials and five audio inductive loops installed in rooms of steel reinforced concrete constructions. The inductive loops were installed at floor level and the measurements were made at the listening height of 1.2m. Measurements of background noise, field strength and frequency response were made at fifteen different measurement points across the room. The research measurements showed that there are differences in field strength and frequency response between these two conditions, whether the audio induction loop is installed in a wooden construction or the audio induction loop is installed in a reinforced concrete construction. The results had a significance level of p=0,05..

The Kedertruss is the loadbearing part in the Keder weatherprotectionsystem and it has been analyzed concerning its loadbearing capacity. The Kedertruss is produced and manufactured by Wilhelm Layher GmbH & Co. KG and this report has been made for their Swedish division Layher AB.  The Kedertruss, designed in Germany according to German designcode, has been recalculated concerning Swedish conditions according to Eurocodes and a ongoing European standardization project. The two-dimensional program Winstatik Frame Analysis has been used for evaluation of load effects. Capacity has been calculated by hand-calculations and it has been verified that the Kedertruss in its larger spans isn?t able to withstand the loads.

The aim of this thesis is to give an insight to how work is being pursued within Swedish SMEin the clothing industry. Furthermore we investigate how efforts can proceed withenvironmental questions in a quest for sustainable development and bring clarity in thedifficulties that occur. Through the use of company examples and a description of how theywork we wanted to give stakeholders knowledge in what resources and procedures that areused today on the market. The function of the report is moreover to provide Swedish smalland medium-sized clothing enterprises suggestions and directions of how to advance withinsustainable development.In our theoretical frame we have chosen to administer the theories that we found suitable forour study. Seen from a perspective of sustainability we have thus applied the theories ofstakeholder and legitimacy, an analysis model for a company?s actions in environmentalquestions and the theory of SME which describes a small or middle sized enterprise?s fivecompetitive variables.The empirical frame we acquired for this thesis is presented in three chapters.