Solar energy is the one most talked about among energy sources due to its huge potential amongst renewable energy technologies. A greater use of the solar energy may be the solution to today's climate threats. Normally there are two different types of solar technologies, solar cells and solar thermal collectors. Solar cells convert solar energy in to electricity whilst solar thermal collectors convert solar energy into heat, which can be used to heat hot water for households. This goal of this study has been to investigate the possibility of implementing solar energy into the energy system of Kista Galleria, one of Sweden's foremost venues.

High-precision cutting in metal is very complicated, a lot of parameters affect the result: what geometries to be manufactured, surface roughness and tolerances to be achieved, batch size etcetera. When pull-broaching internal parts this might be even more important, than in any other cutting operation. Everything is machined in one single stroke and the general technology is built in to the tool, therefore big investments must be made to change the process. Milling for an example: one piece at a time is machined away, and a lot of parameters can be changed easily.It is very high pressure on the cutting-edge when the broach is cutting. To achieve the specified product and to avoid unnecessary toolwear it is essential to use the right cuttingfluid and the right cuttingspeed for an example.

This master thesis is one part of a project, called ?StabSim?, with the purpose to develop a simulation model for the align and stabilisation system in main battle tank 122. The origin of this project is that it should be possible to make control analysis without risking any hardware. Besides that it will be easy to change components in order to investigate the behaviour of the system. The report includes modelling of tower and weapon mechanics and also the modelling of the synchronous motors, which control these.

Nobel Prize Laureate Joseph Brodsky is a key figure in Soviet Russian literature. Expelled from the USSR in 1972, he became a US citizen in 1977 and Poet Laureate of the United States in 1991. In this essay, I have sought to examine the state of exile perceived in Brodsky?s poems. Using Russian literary critic Viktor Shklovsky?s concept of defamiliarization, I have strived to illuminate the formal composition of this state ? its technique.

In 1994 a new Forestry Act was accepted in Sweden. One of the aims of the law is to raise consideration forpreservation of biodiversity. Since the new law got accepted and some time has passed, there now lie someinterest in examining whether the law has been effective towards its purpose. Methods suitable for analysishave been examined during this study. The content of this pilot study is based around five parameters whichcan be used to validate the effects of the new law.

Today more effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

The purpose of this study was to find possible explanations to why the studied herd had an increased incidence of abomasal displacements. The incidence of abomasal displacement in the herd was three times higher than the incidence of an average Swedish herd. The cows in this study were fed a total mixed ration. The different parameters studied were: energy content in food, nutritional content in food, body condition scoring, concomitant other diseases, and blood parameters of glucose, fructosamine, cholesterol, insulin, betahydroxybutyrat and free fatty acids. The author?s suggestions to decrease the problems are to decrease the energy content in the TMR to lower the cows? body condition scores in the dry period and changing the content in the TMR to increase the amount of NDF and adding structure in the form of chopped straw.

Risk assessment is made to determine risks with contaminated areas and to determine which treatment the area requires. In Sweden, risk assessment is divided into three levels: risk analysis, facilitated risk assessment and detailed risk assessment. In detailed risk assessment site-specific guideline values are developed to compare with values of contaminants that are measured in the area.Site-specific guideline values vary with geological and hydrogeological parameters. The purpose of this report is to examine which of these parameters that affect the guideline values. The examination was done using a calculating program for consideration from the Swedish Environmental Protection Agency from the year of 1997.

Three methods of sensitivity and unceartainty analysis have been applied to the operative stormwater- and recipient model StormTac. The study area is the watershed of lake Flaten in the municipality Salem. StormTac?s submodels for stormwater, pollutant transport and the recipient are cosidired. In the sensitivity assessment, the model parametres and inputs were varied one at a time by a constant percentage according to the ?one at a time? (OAAT) method and the response of the outputs were calculated.

Several studies have analysed the relationship between Normalised DifferenceVegetation Index (NDVI) and radiative surface temperature. A main goal for moststudies have been to find the best method for carrying out land cover classificationsand to study land cover changes, based on a combination between the twoparameters. Since atmospheric components have a significant influence on bothparameters, most applications were based on multi-temporal data. The quality of theindividual values in such a combination is improved, but the biophysical justificationis uncertain. This study presents a different method, based on only the combination ofvalues that have been registered the same day and about the same time of the day.125 daily images of NDVI and 250 images of radiometric temperature were used inorder to analyse the relationship between (1) NDVI and radiative temperature and (2)NDVI and relative temperature difference between early morning and mid-day.Results between NDVI and radiative temperature show a significant negativecorrelation on areas where a distinct growing season develops, and a strong positivcorrelation where vegetation is abscent throghout the season.

Pigs in Swedish organic production systems have been shown to have more findings of arthritis at slaughter, compared to pigs in conventional pig production. With this in mind a study was performed, to primary, investigate variation in exterior, gait and weight gain between sire breeds and, secondly, to investigate variation between herds, season, gender, age and assessment occasion on these recordings. Swedish commercial hybrids, crosses between Norwegian Landrace and Swedish Yorkshire were inseminated with either Hampshire or Duroc as terminal sire. All the pigs had known pedigree as each semen dose contained sperms from one individual boar. All piglets were individually tagged closely after birth, and exterior and gait assessment were performed at two separate occasions, early and late during the fattening period.

When cows in Sweden are inseminated the heat strength is reported to the Swedish milk-recording scheme and AI scheme. Cows that show strong signs of estrus are desirable and the trait is included in the Swedish breeding goal. A strong heat makes it easier to inseminate at the right time and to avoid long and expensive days open. Since ten years the heat strength is scored from one to five by the farmer and reported to the milk-recording scheme and AI scheme. Earlier the score was from one to three and the decision was made by the AI technician.

In 1994 a new Forestry Act was accepted in Sweden. One of the aims of the law is to raise consideration forpreservation of biodiversity. Since the new law got accepted and some time has passed, there now lie someinterest in examining whether the law has been effective towards its purpose. Methods suitable for analysishave been examined during this study. The content of this pilot study is based around five parameters whichcan be used to validate the effects of the new law.

The thesis presents an optimally designed kinematic structure for a new 6-DOF haptic devicebased on TAU configuration. The configuration of the TAU-2 proposed by Suleman Khan andKjell Andersson [1] was modified and its mobility was verified by using Grübler criterion tohave a 6 DOF. Analytical kinematic models for the inverse and forward kinematics weredeveloped for the haptic TAU configuration to determine a set of optimal design parameters.Kinematic performance indices such as volume of the workspace, kinematic isotropy and payload index, were defined based on the singular values of the Jacobian matrix. The Jacobianmatrix was scaled to homogenize the physical units. The Jacobian matrix dependent on theposition and orientation of the end-effector gives local isotropy and pay load index, so globaldesign indices were defined, which represent the performance of the mechanism in the wholeworkspace.

Title: What drives the customer's choice of packaging and which factors influence the customer's packaging cost? ? in the automotive and manufacturing industriesAuthor: Lena AnderssonSupervisors: Annika Olsson, Division of Packaging Logistics, Lund Institute of TechnologyHelena Claesson, Volvo Logistics ABProblem: Which parameters are important for logistic people to think of when they are going to choose a package?Which cost factors are included in the packaging cost?What kind of added value can an emballage supplier provide their services with?Purpose: The purpose of the project was to study the parameters that drives the customer's choice of packaging and the factors that influence the total packaging cost. The study also consists of a valuation of what an emballage supplier can offer to add value to their services.Method: The study is based on interviews with people who are working at Volvo Logistics and Volvo Car Corporation. Volvo Logistics provide their customers with standard packaging material, which they own and administrate. Volvo Car Corporation is one of their customers.