Leisure boats of today have a lot of electronics that needs battery power to work. In additionto that electric propulsion systems have gotten more popular lately, which further increasesthe demand for high battery capacity. The batteries used are mostly lead-acid batteries and toget the most out of the batteries it is important to treat them right. To optimize the electricsystem it is important to have knowledge of how the batteries and the electric motor are usedand which factors affect e.g. efficiency and recharging.A new electric drive that can replace old diesel engines is being developed and needs testingand evaluation.

In this master thesis a robot arm belonging to an automatic milking machine from DeLaval is investigated. The robot arm is controlled by a pneumatic cylinder and a valve. The goal of the master thesis is to investigate instability problems and to find out if it is possible to solve them by using gain scheduling. Gain scheduling is a type of controller where the parameters of the controller are changed during operation, for example depending on the working point. First a nonlinear mathematical model of the system was made.

Wood pellets are an upgraded product of residuals from several wood processing industries, for example saw mills and pulp industries. The pellets are produced by pressing the milled and dried sawdust to cylindrical units with a higher density than the initial raw material. Pellets have great benefits compared to the raw material: high energy per volume, good transport and storage properties and homogeneity. Several parameters collaborate in the whole process, which makes it complex. Wood is a heterogeneous material, chemically and structurally dependent on wood parts, habitat and storage procedures.

The purpose of this master thesis is to implement and validate a Power System Stabilizer (PSS) to a generator at Trängslet hydropower station in Dalarna, Sweden. Problems with local rotor oscillations can occur at the hydropower station when power is transferred on a new power line (130 kV) from Northern to Southern part of Dalarna. To ensure good operation properties on this power line Fortum Generation AB and Fortum Distribution AB wants to activate a PSS on a generator.There have been investigations in which situations and what equipment that contributes to rotor oscillations. When this is known the PSS is tuned to damp these oscillations by choosing a good set of parameters. The most important parameters for good performance are to choose amount of gain and phase compensation.

This report is intended to give an insight in the Network Performance Assessment Modeland the parameters that is needed in the making of a fictitious grid that represents anoptimal grid. A main goal is to investigate how the construction of a real grid iscompared to the fictitious.One of the key parameters is how redundancy is treated in the model and to find theoptimal amount of redundancy versus the costs. Further is the dimensioning of the grid ofinterest. The fictitious grid is based on energy whereas the real grid often is based onsubscribed power and these two principles are compared and analyzed.The difference in the outcome of the model result due to variations in input data of themodel is also discussed in the report..

Elitskon? is a new type of horseshoe for trotters. It is supposed to give the horse a trot that mimics the movement pattern of a horse trotting unshod. Many horses show a better trot unshod but this can only be used to a limited extent due to the great wear and tear of the hoof. The objective of this study was to evaluate whether the qualities of Elitskon? are similar to the unshod horse or the traditional aluminium horseshoe.

A growing number of Swedish forest owners are choosing to certify their forestry. However, there appears to be a lack of field surveys which describe differences between certified and non-certified forests concerning the degree of completed environmental considerations. In order to know to what extent certified forests contribute towards improved environmental consideration, we need studies on how large the difference is in relation to non-certified forests.Differences between certified and non-certified forest clearings were quantified through an inventory of the number of retention trees, dead trees and snags. The result showed that the retained number of the investigated parameters varied greatly between individual clearings, regardless of certification status. However, the results suggested that the certified clearings had an average higher incidence ofthe investigated parameters.

This Master Thesis has been conducted as an assignment of the Swedish Defence MaterialAdministration and the Swedish Armed Forces and aims to examine the Target Location Error(TLE) of a Forward Observer System. The targeting accuracy of the system is vital if the systemis to be used as a sensor for precision munitions. The analyzed system, EOI (FOI 2000), wasdelivered to the Swedish Armed Forces in 2007. The targeting sequence starts with deciding theposition of the system with a GPS-receiver, continues with methods where the north direction issettled and ends by measuring the distance, direction and elevation to the target. When allparameters have been measured the system calculates the position of the target.

The purpose of this project was to investigate if retention of polar compounds that are given to treat tuberculosis, diabetes, inflammatory bowel disease and childhood leukemia could be obtained with HILIC separation. By varying different parameters for different types of columns the compounds were analyzed with the aim of finding guidelines for future method optimizations. To perform these analyzes three different columns were tested ? ZIC-HILIC (silica-based with zwitterions), ZIC-pHILIC (polymer-based with zwitterions) and XBridge Amide (amide functions). The results were evaluated with selected quality measures.

I både kvalitets- och kontrollarbete finns det behov att kunskapsmässigt komma så nära verkligheten som möjligt vid fastställande av defektparametrar för oförstörande provning (OFP). Orsaken är att olika acceptanskrav och bedömningsgränser är svåra att klarlägga när man inte kan förlita sig på att uppgifter är realistiska. I projektet har olika erfarenheter använts för att få en bättre helhetsbild i området för defektparametrar och oförstörande provning.Denna rapport redovisar den inledande delen av forskning och utvecklingsprojektet PLANT 2, där olika defektparametrar kartlagts och en teoretisk bedömning utförts med avseende på hur signalsvaret påverkas för OFP-metoderna virvelström (ET) och ultraljudsprovning (UT) i form av puls-eko (PE) och ?time-of-flight-diffraction? (TOFD).Definitionen av redovisade defektparametrar följer i stort SKI-rapport 95:70 [1]. Defektparametrar i denna rapport redovisas i bilaga 1.Vid bedömningen av defektparametrarnas inverkan på OFP-tekniker, har drift¬inducerande defekter och tillverkningsdefekter hanterats separat.

I både kvalitets- och kontrollarbete finns det behov att kunskapsmässigt komma så nära verkligheten som möjligt vid fastställande av defektparametrar för oförstörande provning (OFP). Orsaken är att olika acceptanskrav och bedömningsgränser är svåra att klarlägga när man inte kan förlita sig på att uppgifter är realistiska. I projektet har olika erfarenheter använts för att få en bättre helhetsbild i området för defektparametrar och oförstörande provning.Denna rapport redovisar den inledande delen av forskning och utvecklingsprojektet PLANT 2, där olika defektparametrar kartlagts och en teoretisk bedömning utförts med avseende på hur signalsvaret påverkas för OFP-metoderna virvelström (ET) och ultraljudsprovning (UT) i form av puls-eko (PE) och ?time-of-flight-diffraction? (TOFD).Definitionen av redovisade defektparametrar följer i stort SKI-rapport 95:70 [1]. Defektparametrar i denna rapport redovisas i bilaga 1.Vid bedömningen av defektparametrarnas inverkan på OFP-tekniker, har drift¬inducerande defekter och tillverkningsdefekter hanterats separat.

This thesis investigates lacks in today?s use of the ERP-system Mapaz Affärssystem inthe production planning at Solna Pressgjuteri, and possible improvements. Today thedates calculated by the program to plan the orders are inaccurate and the ordersequence is not optimal, and therefore continuous manual corrections are needed.The approach was to study the program Mapaz to understand how it works, andidentify available parameters for input and output in the different tools offered in theprogram. By studying old lists of planned orders and relevant parameters in Mapaz forindividual orders, production groups, products and operations, the connectionbetween input and output parameters could be understood.Participating in planning meetings and discussions with the company behind theERP-system identified the current usage, desideratum and possibilities with theavailable tools. These were then matched to describe the reasons to the insufficientplanning and form possible actions for improvement.The work has showed poor understanding for the ERP-system and its functions, assome tools intended to assist the planning were not used, and some even usedincorrectly.

These studies are done in behalf of Saab AB AVITRONICS in Järfälla in the form of a thesis atthe Royal Institute of Technology in Stockholm.The task was to examine the parameters that plays a role in the construction of modern radomesoperating in broadband applications.This was interesting for Saab to get an indication of which way they should go at the newdevelopment of radomes for the next generation of equipment for electronic warfare.After a thorough analysis of the influencing parameters, a optimization application was made toget a automated way to get a radome design by specifying data on the radome size, airloads,materials, etc.This is to minimise the time of the laborious work that radome development.inply.This was solved by letting ANSYS calculate the strength of the radome structure and MATLABcalculate electromagnetic data and cost models of different sizes and materials.All these parameters woven together with the optimization tool modeFrontier picks data from therespective program and perform an optimization algorithm and then iterate a step and sends thisdata to calculation programs for the new input data. In the end, we have received a convergedpoint with our optimal solution.For the presumptions and limitations for which applied for this thesis, the result was prettyintuitive. That is to say that the smaller radome - the less materal is needed and lowermanufacturing costs results in the cheapest solution possible. The reality is not so simple. Whereyou have to take more of the electrical details such as the effect on the transmitter as a majorfactor..

In this thesis, input data for energy performance calculations on commercialpremises have been studied. In energy performance calculations, where internal heat gain parameters are unknown, template values that, in a reasonable way represent the activity in the room, are necessary. These values can be used as input data for whole-year calculations, or for calculations on shorter periods of time.The purpose of the Sveby project is to create standardized work practice in energy issues for the construction industry. The work in this thesis is conducted to correlate with the purpose of the Sveby project, with aims of contributing with information and guidelines for the continuing work with commercial premises.In this report, suggestions for template values for internal gains parameters, based on research and calculations in the field are presented. Suggestions on how these can be implemented in a user-friendly way for two energy performance calculation software are also given, VIP Energy and IDA ICE.

Operators and Internet service providers invest in broadband to be able to deliver new services that require higher data transmission rate. A way to make this possible is to use ADSL, Asymmetric Digital Subscriber Line, as the access technology. To be able to handle this technology, the service providers should do a pre-qualification. Methods and tools are needed to analyze the local copper lines and decide if these qualify for ADSL with respect to service availability and possible bandwidth through the lines. This report brings up some methods for pre-qualification of ADSL, the important quality parameters and how to gather them from the available services today.