This study has been conducted with the purpose to examine the marketing effects of waiting lines on the customer- and brand experience. Our ambition has been to describe how the waiting line can be used to heighten the positive experiences. The study has had a qualitative, as well as an inductive approach towards the subject. The study is mainly based on nine interviews with a total of ten respondents employed at nine different companies relevant to the subject. In the final chapter of this study we present our results and conclusions..

This work broadly illuminates the conditions for increasing the commissions of forestry services within the whole, or parts of, the western regions of Stora Enso?s operating area. Through a questionnaire, a survey was made examining whether the owners of the forests themselves do the forestry on their woodlands. This foremost concerns the pre-commercial thinning, but also planting and soil scarification. The survey also shows who are buying the most part of their forestry services and who are carrying it out themselves.

During the year 2014, Artex AB has worked to launch a new product whose function is to locally purify the air. The product is a headboard and its purpose is to give the user clean air while sleeping. The air purifier has different speeds and it`s up to the user to choose which effect that will be on. To get the best experience of the product as possible, the air purifier shall be controlled by a mobile application. In that way the user can increase and decrease the fan speed, even when the user not is home.

In many products a compromise between ground clearance and the required space to store the product has to be made. This problem attracted the attention of the authors of this thesis.The objective of this project is to develop a functioning solution to a foldable wheel. The solution should be applicable to several types of product groups. A limitation for this work has been made so that the work only covers solutions for lighter vehicles.The purpose is to drive this project forward, so that a solution can be found. Furthermore the purpose of the report is to clarify how the authors proceeded to design and construct the wheel according to a fixed specification.

Aim: The aim of this thesis is to do a research about the users? conceptions to the K-project. The K-project is a simplifying work of today?s accounting regulations performed by the Swedish Accounting Standards Board. The K-project is divided into four categories and the companies are divided into each category depending on its size.

The price of farmland has risen sharply in the last 20 years. This has led to discussions about what creates the value of farmland. The aim in this study was to try and find what factors are affecting the price on farmland. The area that is studied is the counties around Mälardalen during the period 2005 to 2009.The method chosen to achieve the objective is the hedonic price model. The variables are chosen after a preliminary study where a literature search has been made and a number of interviews with people in the industry.

The aim of this study was to provide SCA Forest Norrbotten District with material to assist in their work towards decreasing the frequency of bucking splits in their saw timber logs. SCA Forest supplies the Munksund sawmill with pine timber. Periodically the sawmill experiences problems related to bucking splits in their logs. The purpose of this study was to find an available method to measure the occurrence of splits directly on incoming timber. The ambition was also to gain some knowledge about possible variations between different logging crews in terms of split frequency. If possible, this information could be used to investigate if certain crews produced more splits than others, and thereby making it possible to provide feedback to the logging machine operators. The study consisted of two major parts, a literature review, and a practical sawmill study.

This master thesis is commissioned by Permobil AB. The report describes thoroughly the developing process of an adjustable backrest for wheelchairs. The target group for the backrest are people that suffer from scoliosis or other spinal diseases. Because of insufficient pressure distribution usage of traditional backrests is not an option for them.The current solution has got a frame that is made by several adjustable links that is held in place by friction. Between the links velcro tapes are attached that is adjusts the depth.

This report covers the product development of a new type of extendable table for the company Karl Andersson och Söner. The company wants to expand their product collection with a new product. Karl Andersson och Söner is a well-known family company that has been located in Huskvarna since 1898, and they are producing furniture for private- and the public environment.The aim with this project is that the product should lead to increased sales, as well as expand their collection to appeal a wider audience. The work is permeated by two issues, to achieve as good results as possible. The issues will bring up how to make a table better, in terms of the competitor?s options, and how to apply a design process to develop a table that meets the markets needs and requirements.The design process of the work consists of strategically picked parts from three separate design processes.

The aim with the thesis is to get deeper knowledge in one of the subjects botany, livestock technology or economy. I have chosen to get deeper knowledge in how to store potatoes. How are you going to act to keep the quality on the potato during the storage, with a minimum of weight lost? My aim with this thesis is to get a view over how the potato act in storage space. The storage environment is very important in the storage space.

Intentionen med denna uppsats kan väsentligen uppdelas i två sektioner: att först undersöka hur temat ensamhet uttrycks i Inger Edelfeldts romaner med huvudsaklig utgångspunkt i Kamalas bok, och att sedan relatera detta existentiellt genomströmmade ensamhetstema till den filosofiska existentialismen i Jean-Paul Sartres tappning.Som hon beskrivs av Edelfeldt är människan oundvikligen fånge i ensamheten. Alla hennes ansträngningar att erfara gemenskap faller om intet och inför denna bistra verklighet genomlever människan ett främlingsskap emellan sig själv och omvärlden; en alienation som fullständigt omformar och snedvrider hennes uppfattning av sig själv. Som en röd tråd löper alltså ensamheten som ett grundtema genom Edelfeldts romanproduktion och blir i de senare verken allt mer framträdande. Det är följaktligen särskilt i dessa senare romaner som åtskilliga betydande likheter med den filosofiska existentialismen kan uppvisas. Människans obevekliga fångenskap i en utsatt tillvaro präglad av ensamhet och ångest ? där befrielse annan än den funnen i flykten ifrån ansvaret (mängdförsjunkenheten) och i livslögnen (den onda tron) saknas ? är densamma i såväl Edelfeldts prosa som i existentialismens doktriner.

Shock absorber units play a key role in establishing the driving dynamics and performance of automobiles. Öhlins Racing has manufactured high-tech automotive shock absorbers for over 30 years. Öhlins Racing?s advanced technology has contributed to over 200 world championships in automobile racing. Öhlin?s manufacturing process has long utilized automated fluid filling equipment during the final shock absorber unit assembly stage. The filling process consists of vacuum pumping the shock absorber unit and subsequent transfer of fluid. Vacuum pumping is necessary to remove residual air from the shock absorber unit prior to initiating the liquid filling stage. The presence of undesirable gases drastically compromises the performance of a shock absorber. The filling degree, defined as the final ratio of air to oil, is determined by the specific filling protocol as well as the specific equipment utilized.The current investigation aims to develop a viable technique to accurately determine residual air content in shock absorber units. If the filling degree can be appropriately quantified for a specific manufacturing process, then the air/oil ratio may be quantitatively related to shock absorber performance. The utilized measurement method must be completely integrated into the manufacturing process to guarantee shock absorber performance specifications according to the manufacturer?s standards. By utilizing the measurement method developed in this work, the manufacturing process, manufacturing equipment and product specifications can all be tailored to provide improved filling conditions.The developed measurement method provides accurate quantification of the filling degree under a wide range of processing conditions. The method establishes the relative quantity of air in the shock absorber unit by performing in-situ compressibility tests. The fill ratio can be controlled and varied by manipulating the vacuum pressure exerted during the filling process. Performance tests, however, indicate no correlation between filling degree and unit performance..

In this essay I have described ecocriticism as a theory with several different subfields that are inspired by a cross-disciplinary approach, such as green culture studies, ecofeminism, and postcolonial ecocriticism. After a short summary of the background of ecocritical studies I analyze the various subfields, take a closer look at their contents and present various examples of ecocritical thinking. A presentation of the commonly used concepts within the discipline and some reflections on these is followed by my final discussion, where I state that even though ecocriticism is a relatively new theory and the concept doesn?t have a clear definition as yet, it is in my view a useful tool for analysis and can with time make valuable contributions to literary studies, not least by introducing a number of new perspectives..

This degree project has been carried out by Oscar Adolfsson and Marcus Blomqvist, during the spring of 2010, both studying to become Bachelor of Science in Innovation and Design Engineering, at Karlstad University. The degree project includes 22,5 credits.The work is done on behalf of Etac Supply Center AB in Anderstorp. Etac is a company developing and manufacturing home health care products, with operation in Sweden, Norway, Denmark, England and Germany, and with sales worldwide. Bo Lindqvist, R & D manager has been the contact person at Etac.During the project the students has had a workplace at Semcon Caran AB in Karlstad. Semcon has also been helpful as a sounding board.The objective of the work has been developing a new, wall mounted shower chair, assigned for persons with difficulty to stand up while showering.Etacs requirement of the shower chair is that it should be able to support a user with a weight of 100 kg, the chair shouldn?t have any outrigger, optional should be armrests and backrest.

This thesis work is a 30hp D-level assignment in design as a co-operation between MälardalenUniversity and Scania CV AB in Södertälje. The purpose was to develope a close fitted catwalk.The market has seen an increasing value for these types of applications and have the ambition to keep up with the rest of the competitors. The catwalks of todays standards shall be estetical attractive, have a non slippery surface and be costefficient.While working with this project I have spent a lot of time with the concept proposals and with the evaluation of the concepts, resulting in a final CAD model and a approximation of the cost estimate. The new catwalk fulfils all the new recommendations and rules as sharp edges, ADR, the height of the stepup and a non slippery surface with built in drainage..