AimThe specific questions in the theoretic part were:What is contained in the terms "balance and balance skill" and how can this skill be measured?The specific questions in the empirical part were:How does balance skill in different age categories of children correlate with biological and physiological parameters such as age, gender, body height, weight and level of physical activity?MethodsLiterature search based on books and scientific papers related to the questions posed above. Selection was made at libraries and on?line through "Pubmed". Specific search words were used.

An attempt were made to record the 1st movement of Beethoven?s Op. 57, with the objective of performing it as close to Beethoven?s will as possible, in the tradition of the ?historically informed performance? movement.The result of evaluating source material rendered a list of the most relevant material for this study, and hopefully that might prove useful for other studies with similar objective concering HIP and composer-intention based ?autenticity?.However, Beethoven?s will was only vaguely captured in the limited source material accounted for in this study, rendering it moderate-to-small reliability. It?s probably possible to achieve a higher degree of goal achievement, given more time and through the utilization of music psychology to further extrapolate the detailed parameters of Beethoven?s presumed extramusical will.The recording made was not to my satisfaction and has strengthened my view that the interpreter should take council from the collected knowledge of scholarly sources but must ultimately remain free in whether and how to utilize that knowledge.Lastly, I?ve measured the bpm in the resulting recording with a error margin of ±0,02 s.

The fork lifter chipper truck is a concept which has been developed for harvest and transport of bio fuel. The system consists of one fork lifter chipper truck and 1, 2 or 3 transport lorries, usually two, which serves the fork lifter chipper truck. The system is driven by the fork lifter chipper truck that produces chipped material into a container on the truck. When the container has been filled the truck drives to the landing site where it?s offloaded.

With background in the rapidly growing need to find solutions for sustainable energy production and the increasing interest for wind power, this report was written. With take-off point from the wind power plant Big Glenn, which has been built in the harbour of Gothenburg, a model of the adjacent power grid has been created in Simulink/SimPowerSystems. Parameters for the power grid and its components has been provided by Göteborg Energi Nät, that has also been the supplier of measurement data of produced power, the power need from loads in the vicinity, voltage levels, current values and also the variation of power factor at the wind power plant.The SimPowerSystems model has been used to perform simulations of power flow in the grid. These simulated values have then been compared to the measured values to verify the functionality of the model. Further, the model has been used to perform simulations of a grid fault, which causes a voltage drop.

Since the nineties the words customer, effectiveness and quality have become part of everyday school life. Municipalities? makes regular customer surveys to measure both independent schools as municipal schools ' quality. A common method for customer research and background studies is that parents and students are asked to respond to simple Web-based surveys. Customer satisfaction and/or customer dissatisfaction options are presented in tabular form, based on the percentage that expresses a particular position within a query.

Title: The competent teacher-external and internal frameworks and their influence on educational praxis. This thesis is about what kind of approach a teacher (may) consider when he is facing parameters that he can not do anything about, in this case represented by political, educational och social frameworks. One of the things a teacher can do to adapt to the situation is to see what possibilities he has to develop and expand his topic. The study is built on action research and was carried out during a nine months period on an upper secondary school in Malmö, Sweden. The object of reasearch is myself as a teacher and in my result I describe how various educational situations were handled.

AbstractSAAB has for a long time used user controlled pilot models in ARES. ARES is a simulation tool used in the desktop environment for simulations and calculations of the JAS 39 Gripen fighter and other aircraft. ARES stands for ?Aircraft Rigid body Engineering Simulation?. To work with these pilot models has been both time-consuming and inefficient.

This thesis has been carried out on behalf of IV Produkt AB and intends to set an average ratio of thermal energy losses in apartment buildings that were built during the 1960-1990. This shall be derived by analyzing the total district energy consumption that has been divided into three parts: heat energy losses (the actual heating requirements), the heating of domestic hot water and heating energy consumption for the controlled ventilation.Three different residential areas that were built during the years 1962-1966 and one that was built in 1993 has been analyzed. All residential areas are located in Växjö urban and contains between four and six apartment buildings.The analyzed objects have a mechanical exhaust ventilation systems and district heating as the heating method. No own laboratory work or experiments have been done in this thesis, the calculations have been done on the basis of parameters from VEAB, interviews with property managers, and literature studies. By calculations, we have got a result that is reported in Chapter 6.

Background: Female representation on boards is an ongoing debate. The European Parliament voted in November 2013 in favour of a proposal that it should be at least 40 percent women on company boards by 2020. Jens Spendrup, president of the Confederation of Swedish Enterprise, was interviewed on Swedish Radio in February 2014 and stated that there are not enough qualified women to recruit to the company boards. The listed companies in Sweden only have 22 percent of women in their company boards and given Jens Spendrup?s statement should they have difficulty reaching up to 40 percent by 2020.

A large amount of our time is spent indoors in an artificial climate. To make the experience pleasant there are requirements on the ventilation and the heating system. At the present time the most common form of heating is a radiator system complemented with a ventilation system. A ceiling heating system with combined heating and ventilation can replace the two separated systems. The benefit with a ceiling heating solution is that it saves space since the radiator system is no longer needed.

In 2006, Stora Enso Skog implemented an education program in water management for harvester operators, timber purchasers, cut block planners and supervisors. The focus of the program was creating stream crossings with minimal harm to the stream and the surrounding riparian area. This main purpose of this study was to determine the difference in work procedures before and after participating in the program. The methodology consisted of field studies and interviews with harvester operators and their supervisors. The field study looked at how the streams had been crossed concerning the number of crossings, visible damage to the stream and/or the riparian area made by the machines. Biological parameters such as the width and dept of the stream and amount of large woody debris in the stream were also measured. The field result from 30 harvesting sites showed no significant difference between sites that had been harvested before or after the education program. But the harvester operators and their supervisors experienced an increased concern for watersheds after the educational program.

A field experiment was carried out in 2006 to investigate the effects of deep rotary cultivation on sugarbeet growth. The background to the experiment was a 2005 study showing potentially higher yield, higher cleanness and higher sugar content when primary tillage was carried out to 35 cm depth with a rotary cultivator. On four field sites in Skåne (L:a Isie, Ädelholm, Stävie and Vragerup), five different treatments were compared: mouldboard ploughing in the autumn to 20 cm; mouldboard ploughing in the autumn to 20 cm + rotary cultivation in the spring to 35 cm; rotary cultivation in the autumn to 35 cm; rotary cultivation in the spring to 35 cm; and mouldboard ploughing in the spring to 20 cm. The rotary cultivator used in the treatments is manufactured by a Dutch company, Imants. The implement cultivates the soil with spade tines fitted on arms that are mounted on a horizontal rotating PTO-driven axle. Beet plants were inspected and yield determined in the experiment, and three soil parameters were examined: penetration resistance, water infiltration and infiltration of blue dye. Root shape was also examined. The site at Stävie was not harvested due to poor beet establishment. At the other sites, the highest yield was found when the soil was rotary-cultivated in the autumn.

In some herds it has been observed that extremely short teats have become a problem; with a negative influence on the milking performance. The aim of this study was therefore to investigate to what degree the quality of the teats and the milk in cows with short teats is affected as compared with cows with normal teat length and furthermore if the milking performance could be improved by using a liner adapted to short teats. This study was divided in two parts. In the first part, it was examined if there were any differences between short teats and teats with normal length with reference to the milking performance, udder emptying, teat treatment, milk quality, and udder health. 11 pairs of cows were used and in each pair of cows one cow had teats shorter than 40 mm while the other cow had teats longer than 50 mm.

This Masters thesis is made as the first of two visitor surveys of three urban forest areas. These areas are; Skutan recreational area in Haninge, Ugglevikskällan on Norra Djurgården in Stockholm and the Paradiset Reserve in Huddinge. The study is made in cooperation with the managers of the three areas operating within the European Union Life Project regarding Urban Woods for People. The goal has been to collect data through studies of visitors and close by residents in the three areas. The results are to be used as primary values for the follow-up as well as a basis for managerial decisions. The interviews and surveys are also constructed in a fashion so that they can be used for the follow-up study. For the Skutan recreational area the mode of contact was by sending forms to the nearby residential areas.

This thesis work has been performed at Volvo Aero Corporation in Trollhättan, at the department of ?hot structures? involving aircraft engine GP7000. The purpose with the study was to investigate the possibility to reduce size of the forging of flanges on the rear turbine frame when purchasing. Thereto examine the parameters that affect the flanges motion during the manufacturing process. The goal was to provide Volvo Aero with foundation to later bring in slimmed forgings.