Researchers at Karlstad University have developed a method for making paper ion conducting. The reasearchers want to test this technique in various applications and produce products that make use of the ion-conducting paper. Hopefully this will drive the development forward and result in new applications for the ion-conducting paper.This study was to test the possibility of manufacturing a gas sensor of conducting paper along with electrodes of conductive polymers printed on the paper. By comparing the paper sensor with an electrochemical cell in which the electrodes of conductive polymer replaces electrodes of metal and ion-conductive paper replaces the liquid electrolyte in the electrochemical cell, it was hoped that it would be possible to measure the oxidation and reduction reactions that a gas could introduce at the electrodes.It was shown that it is possible to measure a potential difference in the range of 0.3 V to 0.5 V between the electrodes when exposing an electrode to 100% oxygen. The reaction that takes place is relatively slow and the reaction rate is partly due to the distance between the electrodes.Since the sensor can measure oxidation and reduction reactions it is possible that, in further development of a sensor, the sensor can be made ??into a versatile sensor with more applications than gas measurement as there are many more ways to oxidize or reduce the electrodes than by exposure to oxygen.During the study there have been discussions and meetings held with various companies in the sensor industry to be able to specify what the market demands of a sensor made ??of paper and the requirements that must be placed on the sensor for it to be interesting for the companies..

Too high levels of noise lead to various health problems and cost society billions of SEK peryear. In this thesis we have examined a model of the A40E articulated hauler at VolvoConstruction Equipment in Braås. We have tried to reduce cabin noise in an articulated hauler,while also providing a way on how to proceed with a machine when the cabin does not measureup to the sound requirement. The best way to find leaks were with a reference source of model4205 and its speaker HP 1001 from Brüel & Kjaer in the cab and then walk around and listen towhere the reference source was more prominent. In this way, we found that the edges and theplugs were sensitive areas.

Abstract In high voltage substations there is an increasing demand for computerized equipment, and automation of operation and supervision. The future primary equipment will provide the possibility to collect more information and to provide better control for improved effectiveness. Since ABB has got a large customer target, each product must be custom made to fulfil the customers (often from different countries) demands. Later these products will be configured by engineers who may not be familiar with the tools used at ABB. This is a very expensive and time consuming.

This master thesis investigates quality procedures and measuring of solid carbide end mills, with the main focus on measuring equipment. The thesis has been written in collaboration with a special production department for solid carbide end mills at Sandvik Coromant in Gimo. The department?s needs and constraints have been the foundation of the project and the main research question is: how to measure end mills in order to ensure good quality of the produced end mills. The project has contained both a theoretical study consisting of a literature review and practical studies in the workshop with the objective to identify an end mill?s main parameters and the relationship between an end mill?s geometry and the manufacturing processes.

AbstractThis is a study of present day dogs with the purpose to establish a method to investigate archaeological dogs and determine their use in the past. The study has focused on measurements of five bone elements, scapula, humerus, radius, ulna and femur. A principal component analysis has been applied in order to decide which measurements to be further used in the analysis. Different proportions have been calculated on these measurements.A test to try the method has also been done on bones of a wolf and a dog without known background. The results from the different elements are positive, and they narrow the field down to two dog types of which one is more likely to be true than the other.The final results show that, although over lapses between the four different dog groups; hunting dogs, guard/work dogs, sled dogs and shepherd's dogs exists, it is possible to distinguish different dog usage from the proportions of the bones..

This degree projekt deals with Skanska´s safety at the construction site with focus on personal safety equipment. The purpose of this dissertation is to examine how the rules of personal safety equipment are applied and experienced at Skanska´s construction sites.In October 2004 Skanska started a projekt to make the construction sites more safe. With use of a questionnaire we have made a survey at different construction sites. 80 questionaires have been handed out to Skanska´s employees in the southeast region. While they were handed out we conrolled if the employees at Skanska´s construction sites used head protection, easy visible clothing, safety shoes and identification cards.The result of the survey shows how the rules are applied.

During the work at Gateway Security AB in Motala I began examining available antenna models to get a wider perspective, this have given knowledge of their structure, and an understanding of their function. All my necessary fact is based on my observations and notes of these measurings. New antenna models, and available models were examined where measurements at different heights and different distances on the antenna were performed with the help of an oscilloscope and a measure probe, peak ? to - peak was brought on the signal. The measurements are presented in a line diagram.

Vid mätning av HbA1c i blod visas medelkoncentrationen av glukos som en person har haft under de senaste tre månaderna och analysen används vid uppföljning av patienter med diabetes mellitus. DCA VantageTM är ett patientnära analysinstrument som utvecklats för att kunna utföra laboratorieanalyser inom till exempel primärvården. Patientnära analysinstrument är viktiga för att minska tiden från provtagning till behandling. DCA VantageTM är ett halvautomatiskt analyssystem som utformats för kvantitativa mätningar av HbA1c i blod. Syftet med studien var att utföra en verifiering för att se om DCA VantageTM (immunoturbimetrisk metod) kunde användas som ett komplementinstrument till VariantTM II Turbo (high performance liquid chromatography, HPLC).

The aim of this thesis is to examine how thesauri constructed with latent semantic indexing LSI are performing when used for query expansion. There is a well-known problem with synonymy in information retrieval and one solution to this problem is to use a thesaurus. In this thesis thesauri are created automatically to find statistically related words and not only synonyms. LSI is a method that uses singular value decomposition SVD to reduce dimensions in a matrix and find latent relationships between words. We constructed nine thesauri and used them for query expansion in a Swedish database, GP_HDINF.

Trioplanex International AB is a part of the group Trioplast Industrier AB, which produces packaging materials for the film and hygiene industry. The group is active throughout Europe, where most of the production is located in Sweden, with head office in Smålandsstenar. Operations in Landskrona consist of Trioplanex International AB and Trioplast Landskrona.Semi-finished articles consisting of paper cores, so called bobbins, give rise to a high amount of core waste in any form of core cutting. The objective of the report is to map out all core waste and illustrate the material flow with regard to present layout and equipment.In the beginning of the project an analysis of the current process was carried out with focus on the cutting equipment. A case study in the form of an improvement work took place in order to reduce the causes which had the biggest impact on existing machinery.Improvement proposals were discussed by the author together with supervisor, assigner and other parties involved.

Hemp is an ancient cultivated plant that came to Sweden in the 1st to 2nd Century and was particularly interesting for use for food, clothing and building materials. Over time, other applications have been developed for hemp, e.g. in energy and health products. Interesting new uses for hemp continue to be identified and this fascinating plant has incredibly versatile applications.In this project, seed production of industrial hemp in Sweden was studied and evaluated. Five different methods are described, four of which are proven under Swedish conditions.

I den här rapporten utvärderas ett antal olika collaborative filtering algoritmer för att ta reda på vilken av dess som lämpar sig bäst för att implementera åt PlanEatSmile i en PHP/MySQL-miljö. Målet är att hitta en algoritm som klarar av att skapa rekommendationer i realtid och med hög precision. Därtill är det viktigt att algoritmen ska kunna skapa rekommendationer åt nya användare (cold-start-problemet) samt att algoritmen ska skala väl när sajten växer.De algoritmer som undersöks är user-based collaborative filtering, item-based collaborative filtering och tendencies collaborative filtering. Samtliga algoritmer undersöks i två versioner. En version som utgår ifrån receptbetyget och en version som omvandlar receptbetygen till  ingrediensbetyg.Algoritmerna testas på data insamlat genom en enkät för att avgöra deras precision.

The aim of this masters thesis is to examine query expansion. Query expansion is the process of adding new terms to a query to improve the retrieval effectiveness. In this study the baseline query was expanded in five different modes. The first expansion strategy was formulated by the inflected terms as the system does not allow truncation, I have inflected the terms, e. g.

Vid mätning av HbA1c i blod visas medelkoncentrationen av glukos som en person har haft under de senaste tre månaderna och analysen används vid uppföljning av patienter med diabetes mellitus. DCA VantageTM är ett patientnära analysinstrument som utvecklats för att kunna utföra laboratorieanalyser inom till exempel primärvården. Patientnära analysinstrument är viktiga för att minska tiden från provtagning till behandling. DCA VantageTM är ett halvautomatiskt analyssystem som utformats för kvantitativa mätningar av HbA1c i blod. Syftet med studien var att utföra en verifiering för att se om DCA VantageTM (immunoturbimetrisk metod) kunde användas som ett komplementinstrument till VariantTM II Turbo (high performance liquid chromatography, HPLC).

There are several objects of age whose provenance and history has disappeared with time. The purpose of this thesis is to find out which analyzing methods that gives results and how the different methods can be combined and /or established in each other. The investigations centers around an embroidery, belonging to Tämta church, with unknown origin, use and age. The embroidery is long and narrow with applications in the form of dragons and eagles on a ground of velvet cloth. The dragons and eagles are covered with metal threads.