District heating covers around 80 % of the heating demand in apartment buildings and 10 % in single-family homes in Sweden. In the year 2010 the total input of energy to the Swedish district heating grids was about 70 TWh, which corresponds to 11 % of the total energy input to the whole energy system in the country. Through the combined production of heat and power the CHP-plants often reaches an efficiency of 90 % from energy in the fuel to produced heat and power. In order to keep the efficiency high it is important for the owners of the plant to have good knowledge about the plants performance at different operation points. Strängnäs Energi AB initiated this diploma work together with FVB Sverige ab in order to come up with a program for short term planning of the production of heat and power at the company´s CHP-plant.The work consists of three main parts.

The main aim of this research is to survey the general colour scheme for private dwellings inVisby, built 1860?1930. During this period the visual appearance of the town of Visby changedsubstantially, since the increased local production of lime led to the plastering of many woodenbuildings. Which colour schemes were chosen for the different building types of the historic centreof Visby, and which colours came to dominate the time period? The methods used for answeringthese questions have partly been field studies on site and sampling of selected buildings, andpartly critical reading and observation of iconographic material (paintings, drawings, aquarelles,postcards and photographs).

Vad är ett ?Urban building??Den första tanken som slog mig var en byggnad liknande ett komplex, med en mängd olika funktioner.Därför blev det ett självklart val för mig var byggnadens footprint skulle vara, när jag såg den "övergivna" landsplätten. Jag skulle vilja kalla den för en tom lucka kanske. Vidare tänkte jag vad detta komplex av byggnad skulle vara. För mig var det viktigt att skapa en mötesplats för människor, men med det sagt, inte ett kommersiellt centrum.

This thesis explores the narrow spaces between closely built houses in the over 300-year-old wooden town center of Mariestad, Sweden, and their potential as time capsules and sources of knowledge in cultural-historical building investigations. By interpreting well-preserved carpentry work on a facade in one of these spaces, the study aims to provide an example of how these preserved spaces can serve as a source of knowledge and understanding of craftsmanship and the history of the place. The thesis also addresses the municipality of Mariestad's work with cultural heritage, as well as maps out more of these potentially interesting interstitial spaces. Old Swedish wooden towns possess a high degree of uniqueness both nationally and internationally; nevertheless, they are subjected to relatively significant threats of demolitions and substantial changes, often in the form of many smaller restorations or changes over a long period of time. The focus of the case study is a window from the 16th or 17th century and the facade's old, hand planed wooden cladding.

ABSTRACTMany wind turbines have problems with icing and there is still no effective method to de-ice without stoppage of production and power loss. Here I therefore consider other methods than those available today, and particularly, I consider how these methods could be applied to wind turbines of the company Oxel. A surface where the water droplets do not attach might be the basis for a useful method. If no water attaches, no ice could form. To accomplish this a hydrophobic surface is nessesary, for example wax.

The topic of our thesis is Packaging Design as a Brand Building Tool and we are presenting the Scandinavian perspective. We found the topic interesting because, from a theoretical point of view, we identified a scarcity in research focusing on packaging design as a brand management tool, and from a practical point of view, we found out that businesses use packaging design at different levels in their communication efforts. Thus we wanted to provide both academia and business world with a clear picture to what extent and how businesses use packaging design in their brand-building process. Therefore the aim of our thesis is to provide practitioners and academicians alike with a better understanding of how packaging design can be used to create strong brands in the FMCG sector in the Scandinavian market. To reach the stated aim first we provided a solid theoretical background of packaging, its elements and its role in the marketing mix.

 This degree project aims at developing a concept for how to use solar energy to pump up water. The target audience is people living in areas where the functioning of the electricity and water network is absent. In these areas, the hand-powered water pump is the most common technology. The degree project's goal is to find an economically viable alternative to the time consuming hand-powered water pumps. The power comes from solar energy.

There are several energy systems in the Swedish society and to ensure the comfort and health of the citizens it is of importance that the different energy systems are functioning properly. District heating is one of these energy systems and many household depend only on district heating to warm up their homes. District heating is dependent on several processes where every step needs to function in order to deliver the produced heat to the end consumer. Previous studies have investigated the distribution of district heating and how to make customers choose district heating as their heating method. The supply of fuel to the district heating plant has not been studied as much, even though it is an important part of the whole system. This thesis is a part of the project NORD-STAR (Nordic Strategic Adaption Research), which has focused on climate adaption in the Nordic countries.

When I got the opportunity to write this examination did I want to write about something that I both was interest in and also can use in the future. I think it?s going to be difficult to carry on the milk production with only 28 cows. I wanted to investigate the possibility to increase the herd of cows. I also wanted to compare this cost with a new cow house the cows where milked with a robot.

The Republic of Moldova, situated in eastern Europe and a former part of the Soviet Union, is now experiencing a phase of transition in both society and landscape. They have hardly any fossil depots and are currently dependent on Russian gas, with 97% of their energy needs imported. The new elected government wants to move towards the EU and this is generally seen as the way to grow and reduce poverty. Security in the energy sector is important and one tool is to increase the use of renewable energy sources. Through interviews, texts, and visits I have studied the implementation of renewable energies (RE) in Moldova through a society development perspective. The study has aimed to investigate the sociotechnical complexity of this subject and to discuss the potentials and way of dealing with the subject in the specific cultural context of Moldova.

This report will examine various solar energy technologies in order to decide if they could be applied in the Royal Seaport. The Royal Seaport is a Swedish urban district under development in Stockholm, with the goal of becoming a sustainable district. Two main techniques, solar collectors and solar cells, including sub-categories, are addressed in this report. Another sub-category, a hybrid system, will also be mentioned. The main difference between solar collectors and solar cells is the type of energy produced by the system.

This essay discusses joist floor, and the land-building at these structures. In Malmoe there is a neighborhood called Trumman that has a courtyard where an underground garage is located. What possibilities are there in this place and how would an alternative design look? These issues will this essay answer. In the result part it is both described how the joist in Trumman looks and how it is built correctly.

In connection with the property crises in many countries, caused by the financial crises, people are now more aware of the risks involved in poor property-investments. The unusually cold winters along with extreme prices of electricity in Sweden in recent years has also contributed to increased interest in energy-efficient buildings.The process of developing a modern family home in Kiruna, Sweden is presented the first part of this paper. The house has been designed to withstand very high stresses from snow, low energy consumption as well as a high standard of living comfort. Aspects of the house covered here involves everything from construction, heating and ventilation to sanitation. Each of these areas is presented based on their underlying, scientific methods or theories.

För att tillgodose den studerande KTH byggnadens framtida krav kommer det befintliga ventilationssystemet att bytas ut. Två olika möjliga värmeåtervinningssystem har jämförts ur fjärrvärmebehovssynpunkt. Det befintliga systemet med vattenburen batterivärmeväxlare har en låg värmeåtervinningsgrad och Akademiska Hus önskar system med högre värmeåtervinning. I byggnaden har roterande värmeväxlare och frånluftsvärmepump för uppvärmning av tilluften jämförts. Då värmeåtervinning från dessa system inte är tillräckligt kommer fjärrvärme att används.I beräkningarna jämförs fem roterande värmeväxlare mot varierande antal frånluftsvärmepumpen.

This thesis has identified and studied measures to allow for reduced use of electricity in a waste incineration plant in western Sweden. The energy extracted from the waste at the powerplant is utilized and sold in form of electricity and heat. Technical and environmentally the combined heat and power plant is by today's standards among the leading waste incineration plants in the world. The owners are constantly striving to improve the efficiency of the waste incineration plant. They have seen the opportunities for savings in reducing internal usage of electricity.