Abstract During object-oriented system development, programming should be preceded by analysis and design to assure that the system fulfils the demands of the customer and simplify during the development phase and documentation. When modeling the analysis and design phases, several different notations may be used. One of these is the UML (Unified Modeling Language) which this thesis will cover. The aim is to compare the use of the UML i practice versus what is said in the literature. The investigation is built upon interviews at different companies to receive their reflections about the UML.

This report describes how to process audio signals in real time with a digital signalprocessor. The digital signal processor used in the thesis and described in the reportare the Blackfin processor ADSP-BF537 from Analog Devices.In the body of this report there is theory of the processor characteristics and thevarious programming languages used. All experiments that were made on theprocessor are described, these descriptions also help in understanding the annexeswhere the experiments will be presented. The body of this report also describes theprogram used to do experiments. Testing the CPU limit was done and the results arepresented to get a good view of what it can handle.

This report describes the construction of a climate-cabinet for testing of HV-cards (High Voltage) produced at VG Scienta. The main part of the report describes all the different components of the cabinet. The most important parts are a PID regulator from Eurotherm model 2408, a solid state contactor (SSC), a thermocouple, a finned resistor from DBK and different fans. The report even includes the connection between components by cable wiring, isolation, grounding, fuses and shaping of metal goods.As the cabinet also communicates with a computer, the report includes the solution of the data communication using the software iTools from Eurotherm. The communication part includes information about a converter that converts EIA422 to USB.The cabinet was produced at a company, called VG Scienta, in Uppsala during the spring 2010.

Heat and power stations are often in need of optimizations. A simulation model is a tool for findingways to optimize the plant. The scope of this diploma work is to develop a simulation model ofBoiler 5 at Mälarenergi AB. Boiler 5 is a circulated fluidized bed boiler that was taken into service inyear 2001. Among the included parts in the boiler are cyclone, convection part andINTREX-chambers.

This paper presents a project and literature overview about how risk management and quality sometimes goes hand in hand and sometimes in two different directions. Meaning that the risk management can affect product or process quality differently depending on what risks an organisation chooses to control.The purpose with this paper is to get a deeper understanding about how risk and quality works together with IT-support and therefore we have been actively participating in a project with a risk management company called Zert. A literature study and a qualitative interview study have also been undertaken to see what the customers and the other researchers have written, to be able to make proper conclusions on the subject.To easily work together and get the information that was needed, four methods where used. Besides the qualitative interview and literature study the think-out-loud, card sorting and a variation on the extreme programming method where used to help visualize and improve communication both with Zert, the costumers and among ourselves.Zert is a risk management company that helps other organisations to control their different types of risks that they might be taking, by offering a system where the risk management process is held and providing consulting services by helping within the processes. Both Zert and their customers see the communication, knowledge and teamwork as something important as well as the quality within the work, processes and the end result.

Problem: Small companies dominate the skin care industry, and they also face moredifficulties, constraints and resistance in strategy implementation and sustainabilitywork than other operators. Still, the trend of sustainability strategies increasesignificantly precisely in this industry.Purpose: The purpose of the study is to contribute knowledge to the field ofsustainability strategies and motives for the implementation of them in smallercompanies who engage with skin care, in Sweden.Framing of a question: Why do some smaller Swedish companies in the skin careindustry choose to implement sustainability strategies in their business?Literature: The literature functions as a framework for the study and is considered toidentify the possible reasons why small companies choose to implement sustainabilitystrategies or not. The literature is collected before the empirical data.Method: This paper is constructed by a qualitative method approach. The empiricaldata were collected through interviews, by telephone, personal meetings and email,which were then transcribed and the interpreted by a model, which the authors havecreated.Conclusion: Smaller companies are often met by larger resistance and an until up tothe present slowly emerging industry with vague rules and controls as well as ancomparative knowledge of what is good and what is not.

This report describes the development and implementation of a system for transmitting digital information at high speeds from a miniaturized submersible developed by the Ångström Space Technology Centre at Uppsala University. For instance, the vehicle shall transmit image data ? even stream live video - through an optical fibre to a monitor in a ground station. Hence, the system shall be used both to convert the image data to make it transmittable, and to recreate it at the receiver.The work includes a pre-study of the programming language and the technology used. A concept for the solution is presented together with main components later broken down into internal functions.

The government appointed in 2004 a special investigator with the objective to investigate the possibility of introducing a new law concerning implementation of obligatory cash registers with certain certification. This resulted in SOU 2005:35 ?Krav på kassaregister - Effektivare utredning av skattebrott? (Proposition 2006/07: 105). Following advice received from the respondents, the government has drafted a bill submitted to parliament in March 2007. Government bill 2006/07: 105 proposals for new law on cash registers, and submitted to parliament 2007th Act (2007:592) on the cash register was adopted by parliament in March that year and came into force on 1 January 2010.

Bakgrund: Användandet av e-hälsotjänster ses som ett viktigt steg för effektivisering avvården och för att främja folkhälsan. Stillasittande är ett stort folkhälsoproblem ochkunskapen om rekommendationer för fysisk aktivitet antyds var ojämlikt fördelad iförhållande till individernas socio-ekonomiska status. Tre fjärdedelar av alla som sökerhälsorelaterad information är helt eller delvis okritiska till informationskällan. 1177Vårdguiden är en del av arbetet med nationella e-hälsan i Sverige och innehållet faktagranskas. På www.1177.se finns det indikationer på att kännedomen om webbportalentidigare varit låg hos vissa grupper i samhället.

This master thesis work was done by two students at Machine Design at KTH for Lesjöfors Stockholmsfjäder AB. The task was to develop a calculation program for gas springs. The program is going to ease the selection of gas springs for a given case of a lid that should be opened. The program is going to be used internal by sales people at Lesjöfors AB in Sweden and internationally. The program is therefore written in English.The program was developed in Microsoft Visual C# 2008 Express Edition.

AbstractAs a developer of database-driven applications you will be faced with difficult choices, when it comes to choosing database, server and programming language. For the result to be satisfactory it requires the different techniques to interact well with each other and also fulfill performance expectations. This is even more important when the application is deployed to the cloud and the response time plays a major role.This paper evaluates different databases and their performance. To test the databases there was an application made in the server script language PHP or Hypertext Preprocessor and it was deployed to Windows Azure cloud platform. The test applications task is to call and load databases by controlled requests which creates, reads, updates and deletes data in an relatively large extent.The results shows that locale databases or databases in the same data center as the server generates the fastest response.

Leisure boats of today have a lot of electronics that needs battery power to work. In additionto that electric propulsion systems have gotten more popular lately, which further increasesthe demand for high battery capacity. The batteries used are mostly lead-acid batteries and toget the most out of the batteries it is important to treat them right. To optimize the electricsystem it is important to have knowledge of how the batteries and the electric motor are usedand which factors affect e.g. efficiency and recharging.A new electric drive that can replace old diesel engines is being developed and needs testingand evaluation.

Title: To make a living by library music; Opportunities and prerequisites. The purpose of this essay is to investigate how a music producer or composer can achieve placement of his or her music in commercials, TV-shows, computer games, and other media. What is required to make a living by composing and producing music today? This is a qualitative study made by interviewing six persons, who all in some way work with this kind of music. The result shows that in order to reach out and place the music, an active net working, a deep knowledge in music production, in a wide range of music genres, is crucial.

During the year 2014, Artex AB has worked to launch a new product whose function is to locally purify the air. The product is a headboard and its purpose is to give the user clean air while sleeping. The air purifier has different speeds and it`s up to the user to choose which effect that will be on. To get the best experience of the product as possible, the air purifier shall be controlled by a mobile application. In that way the user can increase and decrease the fan speed, even when the user not is home.

This master thesis examines online reading groups with swedish participants. The aim is, by way of introduction, to investigate what kind of online reading groups that exist and how they work. The overall question of the thesis is: how do a conversation about books on the Internet look like? The theory used is Grounded Theory and this is a methodology which has influenced the hole structure of the study. Grounded Theory apply that issues and hypothesis must be created from the collected material, and the author collected for this reason material in the form of survey answers, email-conversations, blogmaterial and articles to draw up exact issues based on this material.The material was sorted into four different categories; social reading, reading fellowship, virtual freedom and anonymity and the issues were formulated according to this categories.