This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

En studie av en mindre kraftstation har gjorts i samarbete med Exencotech som forskar inom energi-återvinning. Deras kraftstation behandlar återvinning av värme från uppvärmt vatten som annars inte hade använts utan ansetts som ren förlust.Den studie som genomförts har gjorts på ett 100kW system med en så stor möjlighet till modularitet som är möjligt för anpassning och flexibel installation. Studien har även innefattat en 5kW prototyp och en modulär version av 100kW systemet upp till 0,5MW. Applikationen har som krav att framför allt minska volymen och storleken på systemet. Studien innefattar även en ergonomisk och användarvänlig inriktning vilket har påverkat designen och konstruktionen hos systemet.För att finna lämpliga lösningar och koncept till projektet har flera konceptgenereringar gjorts, liksom utvärderingar av lösningar.

Title AB Volvo Pentas packaging system ?process and packaging logisticsAuthor Peter Powell, Lund's Technical CollegeSupervisors Annika Olsson, Lund's Technical CollegeJan Svensson, AB Volvo PentaProblem - Packaging requirements ? Which requirements are there, how do they affect each other and how are they fulfilled?- Packaging process ? what is the line of action when developing new packaging and making adjustments in existing ones? Who has the responsibility to do what?- Packaging logistics ? How is the packaging system adapted to transport efficiency and handling?Objective To create an overall picture over how the packaging system affects and is affected by different functions and players within and beyond the company boundaries, to give a clear picture of how changes in the packaging system is made today and how it could work and finally to give suggestions for cost savings affected by the packaging system.Method The methods used for this thesis has mainly consisted of action research and at some extent case studies. As a previous employee at the department of logistics at Volvo Penta I?ve taken part of the environment, information and prerequisites that this thesis discusses on a daily basis. Case studies have been used for the collection and analysis of data concerning packaging logistics as I?ve chosen to consider only specific markets and packaging.Conclusions This thesis has highlighted the demands that are placed upon engine packaging throughout all concerned units and how these demands affect each other, positively and negatively.

Students at Jönköping School of Engineering were given an assignment from Jönköping municipality, to evaluate their decision support system, QlikView. The students have also developed proposals for improvement with focus on usability.The Jönköpings municipality has currently got 11000 employees and consists of nine different administrations. The target group for QlikView is approximately 600 first-line managers.The intention of QlikView is that the users can get an overall picture of their business by having all information in just one system.The purpose of the thesis is to obtain a picture of what the users think about the system today and present relevant suggestions for improvement, which the Jönköping municipality can use when the introduction of the new version of QlikView takes place. The research questions that the study aims to answer are:? Has QlikView got a user friendly interface?? How can the interface be improved to become more user friendly?Theories that this work is based on is Jacob Nielsens ten usability principles and Ben Schneidermans eight golden rules.

During the last year in the Innovation Engineering Program, at Halmstad University, a degree project was performed that was carried out during Fall semester in 2006 and Spring semester 2007. The project was performed by two students in corporation with LIC Audio AB, a company in Stockholm. The degree project was meant to result in a communication aid for people with a cognitive handicap. The project focused on people suffering from dementia because of the expressed need within this group. This aid should first and foremost help in a conversation between a person with dementia and another person, like a relative or nursing home staff.

Examensarbetet utfördes självständigt av Cecilia Edlund som studerar på Högskoleingenjörsprogrammet i innovationsteknik och design vid fakulteten för teknik- och naturvetenskap på Karlstads universitet. Arbetet utfördes under vårterminen 2012 och omfattade 22,5hp.  Uppdragsgivaren har varit Nokalux AB som utvecklar och producerar inomhus- samt utomhusbelysning för den professionella marknaden i Norden. Företaget har ett behov av att utöka sitt produktsortiment på utomhusmarknaden. Vilket har resulterat i uppdraget att utveckla en parkarmatur med LED-teknik som ljuskälla.Fokus i examensarbetet har varit förstudien. Detta för att grundligt ta reda på information kring LED och belysningsteknik som anses betydande vid utformning av utomhusarmaturer.

This is a dissertation for a Bachelor Degree Project at the University of Skövde. The project is carried out in cooperation with the company Kinnarps AB.The objective of this project was to develop a new chair for café and lunch rooms, which should satisfy the markets expectations and demands and match Kinnarps AB?s assortment today. The project has contained everything from identification of user and customer needs and requirements to evaluation and building of a prototype.The result is a chair with a frame of tubular steel and there is nothing like it in Kinnarps AB?s assortment today.

Problem StatementAfter the hurricane Gudrun in January 2005 EON Elnät Sverige AB started the project KRAFTTAG, were 17,000 km of the airborne power grid shall be replaced with cables underground. The transformers in the airborne power grid shall be dismounted, renovated if necessary and then conveyed to stations, of type kiosk.Additional new transformers, more than planned, have been bought. This is due to the dysfunctional transformer flow from the demolished power supply to projects, were the new power supply is built, the general picture is complicated, since the reconstruction involves other companies and many employees at E.ON.PurposeThe purpose of this master thesis is to map and understand the existing transformer flow. The objective is to make a recommendation on how to increase the level of E.ON? s transformer recycling.Methodthe authors have worked with a system approach, including both qualitative and quantitative data.

Denna rapport handlar om en användbarhetsutvärdering av synthesizern OP-1, utvecklad av företaget Teenage Engineering. Studien är kvalitativ och undersöker bara den omedelbara användarupplevelsen av produkten. Rapporten baseras på resultat från ett antal användbarhetstester, utförda på företaget i fråga. Användbarhetstesterna avser att undersöka hur en användare kan förstå hur OP-1:s kan användas och hur de kan förstår dess olika lägen och vidare på vilket sätt detta påverkar den initiala användarupplevelsen.Totalt nio av fjorton tillfrågade personer har ingått i användbarhetstesterna. Urvalsgruppen bestod av personer med tidigare, dock varierande mängd, erfarenhet av synthesizers.

Several technical solutions are ready to step forward as the new generation of propellant, and this report aims to explore the possibility of commercializing fuel cell cars. The report is based on current research and data from today's technology and engineering solutions that are estimated to be commercially realized before 2020.A mapping of today?s different fuel cell options has shown that the most suitable fuel cell option is the Proton Exchange Membrane Fuel Cell, which uses hydrogen as fuel. The report is focusing on a techno-economic well-to-wheel analysis of hydrogen and the energy balance and costs in a system perspective. The basis for this analysis consists of two centralized methods of production, steam methane reforming (SMR), and alkaline water electrolysis.

This degree project has been carried out by Oscar Adolfsson and Marcus Blomqvist, during the spring of 2010, both studying to become Bachelor of Science in Innovation and Design Engineering, at Karlstad University. The degree project includes 22,5 credits.The work is done on behalf of Etac Supply Center AB in Anderstorp. Etac is a company developing and manufacturing home health care products, with operation in Sweden, Norway, Denmark, England and Germany, and with sales worldwide. Bo Lindqvist, R & D manager has been the contact person at Etac.During the project the students has had a workplace at Semcon Caran AB in Karlstad. Semcon has also been helpful as a sounding board.The objective of the work has been developing a new, wall mounted shower chair, assigned for persons with difficulty to stand up while showering.Etacs requirement of the shower chair is that it should be able to support a user with a weight of 100 kg, the chair shouldn?t have any outrigger, optional should be armrests and backrest.

Sammanfattning Projektet, Nytt koncept för linspridning, vilket tillhandahölls av Abu Garcia, bestod i att vidareutveckla multiplikatorrullen, Ambassadeur Classic 5000c. Målet var att konstruera en multiplikatorrulle, med vilken fritt utkast erhålls. På dagens multiplikatorrullar passerar linan genom linspridaren, detta medför att linan följer linförarens rörelse under utkastet. Till följd av linförarens rörelse genereras friktion, vilket i sin tur ger ett kortare kast. För att öka kastlängden, skall linspridaren ej vara i kontakt med linan under utkastet. Det är dock viktigt att linan sprids direkt på spolen vid påbörjad invevning.

Kockums i Karlskrona har givit i uppdrag att ta fram lösningar till öppningsmekanismen för större bordläggningsluckor på marina ytfartyg. De önskar att luckans dimension ska vara max 10 * 3 m. I uppgiften ingår att ta fram en lösning på öppningsmekanism, simulera öppning och stängningsförloppet i Virtual Reality samt utvärdera konstruktionen enligt givna lastfall. Acceleration är ett exempel på laster som luckan kan tänkas utsättas för under öppet läge samt under öppning och stängning. Första delen av rapporten innehåller principkonstruktionen, här har det tagits fram ett antal lösningsförslag som visas med enkla skisser. Dessa utvärderas i olika omgångar mot de krav och önskemål som tagits fram i samarbete med Kockums.

Students at the School of Engineering at Jönköping University have on behalf of the swimming organization ?Nässjö Sim och Livräddningssällskap? conducted research on how to monitor and evaluate swimmers and swimming groups in a simple and efficient manner with a focus on usability and user friendliness. Since no system existed that could meet these requirements, the client had a desire to tailor and develop such a system. The purpose of this work was to develop a system that would work as a tool to be used by coaches and swimmers alike and allow them to eventually follow the development of swimmers and swimming groups. The organization also wanted to have the ability to create tests and exams, both for land and water training, register these in the system and in a structured way know which swimmers took and passed these.For this thesis, the following questions functioned as a framework for progress.UsabilityHow to design a usable system and what is required?SystemWhat type of system is best suited to meet the client's requirements and preferences?Competition resultsHow can one retrieve all the competition results for swimmers of Nässjö SLS?DatabaseWhat type of database is best suited to easily share data with an external existing database?Usability has been the main focus throughout the project.