This master thesis has been performed at Solvina in Gothenburg for Skellefteå Kraftand Vattenfall Eldistribution. The aim of it is to investigate the consequences of theinstallation of a wind power plant on the mountain Uljabuouda in the vicinity ofArjeplog. Especially the impacts on voltage and transient stability are examined.Furthermore, the amount of extra strain on the voltage regulation equipment and theneeds for increased regulation capabilities are looked into.The wind power plant is planned to be built by Skellefteå Kraft and connected to a130 kV grid owned by Vattenfall Eldistribution. The work comprehends the followingmain parts:- Theoretical studies aimed at wind turbines and power system stability issues.- Modelling of the type of wind turbines assumed to be built on Uljabuouda.- Simulations of different operation cases and analysis of the simulation results.The results from the simulations show that, as far as voltage stability and extraworkload on tap-changers are concerned, the wind power plant does not, in anysignificant manner, worsen the present conditions. The problem of overloading theline between Arvidsjaur and Vargfors is also minor.

This thesis studies the concept of balance in the management control systems (MCS) of a small Swedish company within the IT-sector. The aim is to evaluate the importance of balance and dynamics in MCS and investigate which factors affect them. The frameworks used are Simons (1994) four levers of control, and the five-factor model for balance and dynamics by Mundy (2010). The small IT company - the object of the case study - has grown extensively in the last years and needs to develop more formal MCS without losing efficiency and creativity in their fast-moving industry. The case study reveals that balancing MCS is important also in smaller companies with less formal MCS.

Grid codes are becoming more demanding on power generating units due to the factthat the complexity of the power grid is increasing. The penetration of wind powerhas grown over the last years and it is clear that wind farms need to be addressedwith the same type of grid codes as conventional generation units. There is howeveran undeniable difference between the technology in conventional synchronousgeneration units, and the asynchronous generation units in wind farms.This thesis has reviewed the current grid code in Sweden and compared it to the newcode proposed by ENTSO-E, ?the Requirements for Generators?, in the aspect ofwind farms with an installed power of 30 MW or more. The comparison has beencomplemented by an analysis of how wind farms of two different technologies(Doubly fed induction generators and full power converters) can meet therequirements and technical proposals have been given on how to be able to meetcompliance with the new grid codes.The Requirements for Generators contains many non-exhaustive and optionalrequirements, because of this it has been difficult to, at this stage, exactly point outthe technical impact on the grid connection of future wind farms in Sweden.

The mainpart of this thesis is about the developing of a new analysis tool to be used in Zenicor Medical Systems AB ECG-system. The primary task of the system is to simplify the ECG survey for patients who suffers from different kinds of arrythmias, for example heart fibrillation. With this system is it possible for the patients to do their ECG survey by them self at home and then send the signal with their telephone or mobilphone to a server. The equipment used to do the survey is not bigger than you can have it in a pocket and this results in a bigger flexibility for the patient. A doctor can connect to the server and analys the ECG-curve and follow up the patients condition..

Our Bachelor´s Thesis has been performed in co-operation with Bors Automation & Tool AB.Our task was to develop a servomotor powered tube cutting-machine with initial point fromtoday's hydraulic driven tube cutting machine Bors HYD 23. The purpose with the newconstruction was to achieve a more power-efficient tube cutting machine which could lowerthe power consumption, and also meet the market continued growing demand forenvironmental-conscious production.Bors Automation & Tool gave us relatively free hands in order to enable new thinking ideaswithout following their traditional constructional solutions.Our solution resulted in a construction based on a power source existing of a servomotordrivenrollerscrew, witch provides a more rational use of energy compared with the currentmethod.Bors Automation & Tool AB has decided to fabricate a prototype of Bors E 23 during theautumn of 2007, which they are planning to revile at the Tube 2008 exhibition in Düsseldorf,Germany.NOTE:Due to an agreement signed by the authors in the beginning of this project, no appendix is published at this time.If you want to wiew these documents, please contact the authors..

The aim of this investigation work " What was it called...Equality...? is to study a clinics current gender equailty plan from a gender approach and by a field survey see if, and in that case, how it can be improved. A connection between existing gender norms and gender power strukctures is applied in the results of this survey in order to illustrate their significance from an individual as well as a structural perspektive.The survey has been carried through by a field survey as well as a discourse analysis as method. Yvonne Hirdmans gender power system is on of the main theoretical points of departure.The results that I have achieved in this essay is that gender can be looked at in different ways within the labour market where women have the main responsibility over the family and are considered more nursing then men. Men on the other hand are thinking of their carriers and have higher salary requirements.

The existence for companies today consists of constant challenges with customers that want more individual products with high quality as quickly as possible. For a company to be able to have a short delivery time, it must also have a short production time. This makes streamlining and improvement of processes a big part of a company?s workThis thesis has been carried out together with the company Lasermax Roll Systems AB, a world-leading manufacturer of feeding, finishing and monitoring systems for high-speed digital printers. They manufacture their products according to the assembling for costumer order principle.The purpose with this thesis is to map and analyze, the assembling process and the test process at Lasermax Roll Systems AB.

Today significant resources are provided to improve the digital work environment within the Swedish healthcare to create efficiency, good work environment and patient safety. Despite this, major flaws are shown by the lack of communication between the eHealthcare systems. This becomes a stress factor among healthcare professionals because of increased administration and decreased physical contact with patients. The purpose of this study is to create a understanding of the concept of interoperability at different levels in the eHealthcare systems. This has been conducted through a qualitative interview study at a healthcare center where the respondents have been describing their digital work environment and the way it works today.

Problem: Our opinion is that it is important to consider about usability in system development. In this thesis we will focus on usability in point-of-sale systems. The point-of-sale system we base this thesis on is Extenda Retail. Our case study is performed on Ica Kvantum in Bromölla, which implemented Extenda Retail about two years ago. Purpose: The purpose of this thesis is to figure out what important factors there are to consider, in usability aspects, when developing point-of-sale systems, with focus on the cashier. We also wish to find out the cashiers opinions about the Extenda Retail system. Method: The information gathered for this thesis consists of literature and interviews.

The objective of this study was to make an inventory and a potential analysis of the organic beef production in the region of Gävleborg, Sweden. A survey was conducted, where a questionaire was sent to all farmers in the region who had environmental subsidies concerning organic cropping systems in 2001. In total, there were 701 farmers, of which 46 % participated in the study. Three slaughter houses were interviewed to get their pictures of the development of organic beef production. The study shows that there are potentials and interests in the region to increase the production of organic beef.

Purpose/Aim: To find power structures within the blog network.Material/Method: Using keywords to find all available blog posts about the National Defence Radio Establishment from the blog search engine Twingly, and thereafter using the same blog search engine to find inlinks from other blogs, to those posts. The data is set into the context of the small-world networks models of Duncan J. Watts and rich-club models of Sergi Valverde och Ricard V. Sole.Main results: 5183 unique blogs have written about the subject in 22779 blog posts to which 28128 inlinks from other blogposts are made. Just over one fifth of the blogs are linkted to each other in one big network, where the remaining blogs stand without any ingoing or outgoing links.

Central African Republic has partly been portrayed in the media as a forgotten crisis, but also as something that is completely natural for how it is in Africa. The society has perceptions about Africa, which has been reproduced and reconstructed in the selected articles. The discourses in particular have appeared in articles are discourses about: us and them, the confidence in experts, social representations especially (emotional roots), ideological inequities and power relations between different parties..

This essay shows how the concept of virtue can deepen our understanding considering processes of empowerment. A virtue is understood as a trait of character, manifested in habitual action, that it is good for person a to have. Virtues are interpreted as socially constructed. Empowerment is presented as a process toward self-confidence and self-determination where recourses and freedom propels the development toward power for the individual, the household and the community. Why does the concept of virtue deepen our understanding? It is argued that our theoretical perceptive of empowerment needs to better encompass values, norms and practise.

This is a study with a qualitative approach and a social psychological perspective. Our purpose is to describe and analyze authority officials descriptions of individuals with a social disability and their perception of how the interaction in the encounter with its implementation. We are interested in how they experience their power as authority representatives. The following issues are highlighted.? How do people in authority describe individuals with a social disability?? What is the authority officials view on the interaction in meetings with individuals with a social disability?? How do authority officials experiencing his or her position of power in relation to the meeting?Our results are based on semi-structured interviews with five persons in authority, which is active in Insurance and Employment Service in Örebro County.

GPGPU is a collective term for research involving general computation on graphics cards. A modern graphics card typically provides more than ten times the computational power of an ordinary PC processor. This is a result of the high demands for speed and image quality in computer games.This thesis investigates the possibility of exploiting this computational power for image processing purposes. Three well known methods where implemented on a graphics card: FFT (Fast Fourier Transform), KLT (Kanade Lucas Tomasi point tracking) and the generation of scale pyramids. All algorithms where successfully implemented and they are tree to ten times faster than correspondning optimized CPU implementation..