By exposing their products in blogs, companies have the opportunity to reach out to hundreds of thousands of consumers daily. Instead of using conventional Internet advertising such as banners and ads, some companies chose to make use of product placement in blogs. By choosing to expose their products in blogs, companies use a medium that blog readers are familiar with and can relate to, and can thereby solicit customers for their products and brands.We will examine whether product placements in fashion blogs are an effective way for businesses to market themselves and their products. We measure this efficiency, by keeping a record of the sales of ten product placed garment and accessories that we have selected from four of the largest blogs in Sweden. The stores we examine sales of product placed goods in are volume brand stores such as Zara and H&M etcetera.

Stormwater run-off from surfaces such as roads or rooftops is often polluted with heavy metals and nutrients. Many of these substances can cause great damage in biota if they end up in the recipient. In Sweden constructed wetlands and ponds for treatment of stormwater are frequently used, since research has shown that these treatment ponds are reducing stormwater pollution considerably to a low cost. The knowledge of these pollutant removal mechanisms and how follow-up and assessment of the ponds should be performed is still limited.To determine the pollutant removal efficiency of the stormwater ponds it is recommended that flow-weighted water samples are collected from both the inflow and the outflow of the pond. This method demands considerable resources of time and money for installations and analysis.

Working with health-management has become something most organizations would describe as essential for being legitimate today. The aim of this thesis is to investigate how this subject is handled in an existing company and how this work is percieved by the employees in the organization. Due to the fact that limited research has been conducted on this issue, we see this thesis as a potential for increasing the understanding of how health management is articulated in practice. Our results show that health management in our studied organization is far reaching in comparison with most organizations, but has room for improvement according to the Integral Theory. The consequence of differences in perceptions between management and employees could result in that health management does not become an integral part of the company and its daily operations to the potential extent..

Lokala investeringsprogram was a subsidy program which supported environmental reforms during the years 1998 to 2002. The subsidies were given to Swedish municipalities. Most of the evaluations of the subsidised projects have now been completed and included in a database. The purpose with this thesis is to analyse whether the instrument has been effective with respect to carbon dioxide reductions and costs. These calculations have focused on subsidy and cost efficiency. The analysis has been compared with a previous report called "LIP ur ett samhällsekonomiskt perspektiv". The result shows that the reduction cost for one kg CO2 has been almost one SEK, which is twice as high as the cost reported in a previous report, half a SEK.

The term "Project" have become a growing work model that exist in almost all bransches. A project is a work effort made over a finite period of time with a start and a finish to create a unique product, service, or result. Science shows that time limitation has an impact on humans to perform under pressure, which challanges the contributor to deliver. This report contains an examination about project management, both coming from scientific results and an external business. The point of this study is to bring ideas of improvement, which can make the work method more effective in this company..

A large amount of our time is spent indoors in an artificial climate. To make the experience pleasant there are requirements on the ventilation and the heating system. At the present time the most common form of heating is a radiator system complemented with a ventilation system. A ceiling heating system with combined heating and ventilation can replace the two separated systems. The benefit with a ceiling heating solution is that it saves space since the radiator system is no longer needed.

This case study is performed within the production of Sherwin-Williams, Bellö. The purpose is to increase the understanding how a value stream can function more efficient, from a lead time perspective. With the analytical model that is build up on known theories, the purpose have been fulfilled. Mapping of value and non value time for four products thru their respectively process reveals wastes, which is, waiting, transport and movement, incorrect processing and set-up time that in it self create transport and movement. Thru identified wastes that causes loss in lead time suggestions of improvement has been proposed.

Dampness in the indoor environment have been a major issue of discussion the last decades since more and more people complain about their indoor environment. In the present situation there are difficulties to find what causes people?s discomfort in a damp environment even though there is a strong connection between dampness and human health.The aim of the thesis was to contribute to the work done today to achieve a better indoor environment in damp buildings. The purpose of the work was to evaluate whether the measures issued for dampness in the indoor environment contributes to the improvement of health and environment for those who are living or working in that space. Through a literature review, interview and survey the following three questions were answered to achieve the aim and purpose:How are people affected by the indoor environment in damp buildings?Which are the measures issued to prevent dampness in the indoor environment?Do these interventions contribute to a better indoor environment?How people are affected by the indoor environment in damp buildings and how these problems are prevented were the foundation for the continued work with the survey.

High quality within a Lean production system begins with standardised work, which creates stable processes able to generate predictable output. If nonconformity from the standard procedures occurs, routines are needed to analyse, correct and prevent the nonconformity from occurring again. In that way, the nonconformity can be a trigger for continuous improvements toward more stable processes. In takted production lines, where the operator follows a standard sequence with tasks set to be completed within the takt time, a nonconformity leads to downtime in the operator?s sequence, and no value is added.

The sun is essential to life on earth and no matter where you are, there is a constant need ofenergy. Nearly 800 000 years ago man learned for the first time to use fire in a controlled way.Since then, fire has given us the opportunity to inhabit places despite a cold climate. In Swedenthe resident sector accounts for a major part of the total consumption of energy. In a time whenenvironmental issues and greenhouse effects are increasing, we also see a future of rising energyprices. With this perspective, we have in this bachelor thesis in the Building Environment at theRoyal Institute of Technology, KTH, in Stockholm decided to focus on the renewable energysource, solar energy.The energy from solar radiation is a free resource and does not have any negative effects uponthe environment.

This report is made as a literature review, focusing on the work done to increase understanding of efficiency in the categories of substations and secondary heating systems, with respect to the deviation from the theoretically possible cooling off in the distribution network as well as the economic benefit that appear. The main purpose of a considerable part of the literature used in this report addresses the issue of identifying individual causes of reduced cooling in district heating systems. These literature resources have been compiled and summarized as part of the report.The technology of district heating is associated with benefits such as better use of the energy in a fuel. This is the case of cogeneration plants where serial generation of electricity and thermal energy increases efficiency compared with the parallel generation where heat is generated locally and electricity is generated centrally. Serial generation thus allows for lower primary energy demand.

This Master of Science thesis was a part of Pharmadule Emtungas project to construct a mobile automated cell for welding of carbon steel pipe (Heating, Ventilation and Sanitation). Pharmadule Emtunga is using a modular building concept for building pharmaceutical factories. The modules contain these pipes. The goal of the thesis was to present concepts for technical solutions regarding welding methods and fixtures for the cell. Conceptual models for the cell were made with aid of CAD software.

The work presented in this report is written at IEIs department on Linköping Institute of Technology. The report aims to increase the assembly efficiency at Wigells AB. The report shall be used as a guide for the implementation of changes at other workstations in the company. Together with Träcentrum in Nässjö, Wigells AB has identified the needs of this study and contacted IEI at Linköping Institute of Technology.In order to implement an efficient assembly line at the company, studies on lean production have been made. This theory has been studied and together with our own views and findings at the company we have analyzed the assembly area.Wigells is a small company that manufactures wood furniture.

Demands on businesses are constantly increasing and the competition in the market-place is becoming ever tougher. To gain the long-term confidence of customers, not only the best businesses, but also the best supply chains are required.Volvo Cars is experiencing a changing competitive situation and their retailers are having trouble stocking the right spare parts. Shorter product life cycles and the growth of Volvo?s product program result in an increase in the number of spare parts to be stocked. In order to adapt to market trends and meet customer demands, Volvo has developed the LDC model, establishing a number of regional warehouses in strategic locations in Sweden, de-signed to supply spare parts to the regions? retailers through so-called Vendor-Managed In-ventory (VMI).The purpose of the study is to examine Volvo personbilar Sverige?s (VPS) motivation for a modified customer-service strategy through LDC.

A trading halt is a measure conducted by a securities exchange in order to reduce information imbalances between market participants, thus enabling a higher level of market efficiency. A market is said to be efficient when new information concerning a company is instantly reflected in its stock price, implying that abnormal stock returns cannot be systematically achieved in an efficient market. The purpose of this study is to examine the occurrence of abnormal stock returns following trading halts on the Stockholm Stock Exchange. The study is based on a sample of 64 trading halts executed between January 2003 and February 2008. Historical daily prices for stocks subject to trading halts during the period have been gathered from the Datastream Advance database, while information on date and time of trading halts have been collected from the Stockholm Stock Exchange website.