In  the  constantly  changing working  life  of  today, where  emphasis  on  human  capital  grows stronger,  the  importance  of  recruiting  and  retaining  good  staff  increases.  Successful recruitment  requires  a  first-rate  recruitment  process.  In  literature  on  recruitment recommendations for successful recruitment are presented.   The  aim  of  this  study  is  to  describe  similarities  and  differences  between  these recommendations and Svenska Spel?s recruitment practice on the basis of a description of the recruitment process at AB Svenska Spel, and also to identify possible reasons for differences between theory and practice.  To  meet  the  purpose  of  this  study  literature  and  scientific  reports  have  been  studied. Interviews  with  five  HR-specialists  and  four  managers  have  also  been  conducted.  The recruitment process is therefore described out of the employer?s point of view.

Due Diligence is today an important part of the transaction process through sales of properties and isan important process for both sellers and buyers. The process intends to review an asset before atransaction to minimize the risks associated with the acquisition by detecting weaknesses and verifythe asset's characteristics. The use of Due Diligence has become increasingly common over the pasttwenty years in the Swedish real estate market and there is no indication that this trend will decreasebut rather increase. Although there is widespread use of the process both in acquisitions ofcorporations and properties, both in Sweden and in the rest of the world, it is costly for thepurchasers and the concept is far from fully developed.This thesis aims to clarify what the real estate market thinks about the potential development of theprocess itself and the role of the actors. The main question is what opportunities exist to develop theconcept of Due Diligence in real estate transactions.

Denna uppsats behandlar konstruktionen av Vänsterideologi i den svenska partipolitiken under 2001-2013. Uppsatsen förhåller även sitt material och sina fynd till teoretiseringar om Ideologiernas Död och Vänsterns Pånyttfödelse. Det är främst Socialdemokraterna (S) Vänsterpartiet (V) och Kommunistiska Partiet (KP) som undersöks i denna studie. Detta görs med idé- och diskursanalys på partiprogram, valmanifest och TV-sända debatter. Konstruktionen av Vänsterideologi ställs sedan i förhållande till teorin om Ideologiernas Död kontra teorin om Vänsterns Pånyttfödelse..

Trots att människor intresserat sig för moral och etik sedan antikens Grekland så verkar vi inte kommit närmare konsensus i en enda fråga. Förklaringen till detta kan vara att moral är subjektivt. En teori som stödjer detta subjektiva synsätt är CAD-teorin (Community, Autonomy & Divinity). Den säger att vissa känslor är kopplade till olika typer av moraliska brott, och att vi använder moralen som ett sätt att förklara dessa känslor. Enligt teorin så finns det tre stycken moraliska ?system?.

Ett utforskande av interpretation utfört i musik, akvarell och ord. En närgången bild av en levande musikalisk process studerad från en inre kärna. Arbetet består utav denna text, tre konserter från våren och sommaren 2013 som dokumenterades i DVD-format, ljudupptagningar av improvisationer och akvareller skapade i tiden för arbetet. Arbetets kärna, ögonblicksbilder från insidan av själva processen, presenteras i en egen del av arbetet och omsluts av förklarande, reflektioner och tankar. Författaren spelar viola och upplever synestesi..

This report analyzes and examines a hypothesis for finding a method to optimize thelength of the delubrication process time based on a total charge weight. The work hasfocused on the holding time for delubrication and the total charge weight.An important step in the manufacturing chain of cutting tools is when the greenbodies undergo the sintering process. Today, the delubrication step has the sameprocess time independent of the total charge weight. An implementation of a methodto adjust the delubrication process time would give more consistent quality of thecutting tool´s internal characteristics but also reduce the time course of the sinteringprocess. In the present project two methods for this goal were tested, thedevelopment of an algorithm and a weight interval subdivision with associateddelubrication process times.During delubrication a pressure increase is observed due to the decomposition of thePEG in the powder mixture.

This thesis work has introduced process orientation at the printing company Color Print Sweden AB. The outcome ofthis work is a survey of the work flow at the prepress department. To visualise the production process at the companya comprehensive mapping of the main process, order-to-delivery, has been made. The work has detected a couple ofcritical elements in the existing process. These elements are the following: initial check of material delivered to the prepressdepartment as well as the control made of the plotter print-out, digital test print and plate.

Every plan and program decided on by an authority or municipality, where the environmental impact can be considerable, must be environmentally assessed according to Environmental Code, the Planning and Building Act (PBA) and the Regulation on Environmental Impact Assessment.The purpose of this study is to examine the Environmental Impact Assessment (EIA) for The Region Development Plan for the Stockholm Region, RUFS 2010. The plan was approved by at that time the Regional Planning Office (Regionplanekontoret), which procured the process by consultants. RUFS 2010 includes two merged plans ie. a regional Development Plan (RUP) and the Regional Spatial Plan for Stockholm. It was necessary to establish an environmental assessment of RUP, but not for the regional plan.

The final stage of a designers work is always a bit tricky. Design is an abstract phenomenon and no one can tell when a design is really finished. The design process that designers work within has been thoroughly studied but cannot be truly mapped with strict constraints which the designer can follow to succeed. Therefore, in this paper we take a look at the final stage in the design process. The main goal is to get more knowledge and highlight key factors about what designers face when they are about finish their design or what forces them to leave a project that can stay in development for eternity.

Each student in elementary school will under current policy documents have an individual development plan (IEP) from 1 January 2006. The plan should primarily aim for a higher goal achievement, but also to the student to gain a greater understanding of their own learning process and knowledge. My experience is that some students, despite efforts IUP have difficulty seeing their own learning process and it has been the starting point of my study. The aim of the study has been to investigate and analyze teachers work with individual development plans from the first grade to the sixth grade from a teacher's perspective. The goal was to identify strategies and techniques that could help develop IUP as a tool for the student's learning and understanding of their own learning process.

Sammanslutningar bildas fo?r att minska transaktionskostnaderna pa? marknaden, i fo?rhoppning om o?kad produktivitet. Fo?retagets uppgift a?r att generera o?kad vinst och aktiea?garva?rde, men separationen av a?gandet och kontrollen ger upphov till avvikande egenintressen inom fo?retaget. Ersa?ttning till VD:n och ledande befattningshavare blir ett instrument fo?r att koordinera gemensamma la?ngsiktiga intressen med aktiea?garna.

Design Thinking är ett spännande och fortfarande relativt outforskat område med rötter i Service Management. Med hjälp av designerns verktyg och metoder och en mångvetenskaplig grund med fokus på kundens behov kan Design Thinking bidra till att utveckla produkter och tjänster och genom detta öka lönsamheten för företag. Syftet är att göra en deskriptiv studie av området Design Thinking som metodiskt arbetssätt vid tjänsteutveckling. Detta appliceras sedan på verkligheten för att komparativt se hur tre svenska bolag arbetar med tjänstutveckling inom en av världens största tjänstebranscher utifrån områdena Service Management och Design Thinking. Uppsatsen beskriver utvecklingen från Service Management till Design Thinking och hur man har gått från att utveckla tjänster till att designa tjänster.

This dissertation is carried out on behalf of Two i Sverige AB. Two is a consulting agency which primarily works with the development of homepages. The company has several of its complete applications written in ASP e.g. the development of homepages. At the agency they have seen benefit migrating these applications from ASP to the more flexible environment ASP.NET.

By studying literature concerning design, didactics and reflection, and complementing those explorations with interviews with experienced design educators, this thesis challenges the idea of aesthetic media education being purely aesthetic in its characteristics. Drawing from their own experiences as a media aesthetics educator and an industrial designer, the two authors argue that the work flow used within most fields of design, commonly known as the design process, might provide a suitable didactic alternative to a field of education lacking relevant methodology. The literature study offers a better understanding of the design process and how it may be defined and viewed within an educational context. The interviews provide a more practical insight into the world of design education. The result shows that the design process as a didactical method theoretically offers both elements of critical thinking as well as direction and frames for students lacking aesthetic and artistic experience.

Relationen mellan riskkapitalist och företagsledare kan härröras till industrialismens genombrott i början av 1900-talet, vid den tidpunkten ägde uppdelning av ägare och företagsledning rum. Syftet med denna uppsats är att beskriva och öka förståelsen för grunden i relationen mellan en riskkapitalist och en företagsledare. När ägandet och styrningen är uppdelat kan konflikter uppstå vilket gör det intressant att även beskriva och öka förståelsen för när de båda aktörerna i relationen kan ha differentierad riskattityd. I den teoretiska referensramen beskrivs två teorier som kan anses ligga till grund för ekonomiska relationer, principal ? agent teorin och tillits teori.